Use Cisco 300-410 Dumps To Succeed Instantly in 300-410 Exam

Ultimate Guide to 300-410 Dumps - Enhance Your Future Career Now

To prepare for the Cisco 300-410 exam, candidates can attend training courses or use study materials such as books, videos, and practice exams. Cisco also offers online resources, including study groups and forums, where candidates can connect with other professionals and share their knowledge and experience. It is essential to have hands-on experience in implementing routing and services in an enterprise network to succeed in 300-410 exam.

ENRASI (300-410) Cisco Certified Specialist's salary

• Europe: 59,321 Euro
• India: 10,88,237 INR
• England: 50,025 Pound
• United States: 65,404 USD

 

NEW QUESTION # 145
Refer to the exhibit.

The output of the trace route from R5 shows a loop in the network. Which configuration prevents this loop?
A)

B)

C)

D)

• A. Option A
• B. Option D
• C. Option C
• D. Option B

Answer: A

NEW QUESTION # 146
Refer to the exhibit.


The network administrator must configure Cape Town to reach Dubai via Tokyo based on the speeds provided by the service provider. It was noticed that Cape Town is reaching Dubai directly and failed to meet the requirement. Which configuration fixes the issue?
A)

B)

C)

D)

• A. Option
• B. Option
• C. Option
• D. Option

Answer: D

NEW QUESTION # 147
Refer to the exhibit.

What is the result if applying this configuration?

• A. The router cannot form BGP neighborships with any other device
• B. The router can form BGP neighborships with any device that matched by the access list named ''BGP''
• C. The router can form BGP neighborships with any other device.
• D. The router cannot form BGP neighborships with any device that is matched by the access list named ''BGP''

Answer: C

NEW QUESTION # 148
Refer to the exhibit.

An engineer is troubleshooting BGP on a device but discovers that the clock on the device does not correspond to the time stamp of the log entries. Which action ensures consistency between the two times?

• A. Configure the service timestamps log uptime command in global configuration mode.
• B. Configure the service timestamps log datetime localtime command in global configuration mode.
• C. Make sure that the clock on the device is synchronized with an NTP server.
• D. Configure the logging clock synchronize command in global configuration mode.

Answer: A

Explanation:
Explanation
https://community.cisco.com/t5/networking-documents/router-log-timestamp-entries-are-different-from-the-syste

NEW QUESTION # 149
Drag and drop the DHCP messages from the left onto the correct uses on the right.

Answer:

Explanation:

NEW QUESTION # 150
Refer to the exhibit.

An administrator configured a Cisco router for TACACS authentication, but the router is using the local enable password instead Which action resolves the issue?

• A. Option D
• B. Option C
• C. Option B
• D. Option A

Answer: B

NEW QUESTION # 151
Refer to the exhibit.

An engineer applies a prefix-list filter that filters most of the network 10 prefixes instead of allowing them.
Which action resolves the issue?

• A. Modify the ip prefix-list ElGRP seq 10 permit 10.0.0.0/8 le 9 command.
• B. Modify the command Modify the Ip prefix-list ElGRP seq 10 permit 10.0.0.0/8 le 32 command.
• C. Modify the ip prefix-list ElGRP seq 20 permit 10.0.0.0/8 ge 9 command
• D. Modify the Ip prefix-list ElGRP seq 20 permit 0.0.0.0/0 le 32 command.

Answer: D

NEW QUESTION # 152
Refer to the exhibit.

An engineer configures a static route on a router, but when the engineer checks the route to the destination, a different next hop is chosen. What is the reason for this?

• A. The configured AD for the static route is higher than the AD of OSPF.
• B. Dynamic routing protocols always have priority over static routes.
• C. The metric of the OSPF route is lower than the metric of the static route.
• D. The syntax of the static route is not valid, so the route is not considered.

Answer: A

Explanation:
Explanation
The AD of static route is manually configured to 130 which is higher than the AD of OSPF router which is
110.

NEW QUESTION # 153
Refer to the exhibit.

The output of the trace route from R5 shows a loop in the network. Which configuration prevents this loop?
A)

B)

C)

D)

• A. Option A
• B. Option D
• C. Option C
• D. Option B

Answer: A

NEW QUESTION # 154
How is VPN routing information distributed in an MPLS network?

• A. It is established using VPN IPsec peers.
• B. The top level of the customer data packet directs it to the correct CE device
• C. It is controlled through the use of RD.
• D. It is controlled using of VPN target communities.

Answer: B

NEW QUESTION # 155
Refer to the exhibit.

PC-2 failed to establish a Telnet connection to the terminal server. Which configuration resolves the issue?

• A. Option A
• B. Option D
• C. Option C
• D. Option B

Answer: A

Explanation:
Explanation
In fact in this question both answer A and answer C are correct but we believe answer A is the better choice as it only allows PC-2 to telnet to terminal server. All other hosts are refused to telnet to terminal server via sequence 20.

NEW QUESTION # 156
Refer to the exhibit.

Users in the branch network of 2001:db8:0:4::/64 report that they cannot access the Internet. Which command is issued in IPv6 router EIGRP 100 configuration mode to solve this issue?

• A. Issue the no neighbor stub command on R2.
• B. Issue the no eigrp stub command on R1.
• C. Issue the eigrp stub command on R1
• D. Issue the eigrp command on R2.

Answer: B

NEW QUESTION # 157
Refer to the exhibit.

When the FastEthemet0/1 goes down, the route to 172.29.0 0/16 via 192.168.253 2 is not installed in the RIB.
Which action resolves the issue?

• A. Configure reported distance greater than the feasible distance
• B. Configure feasible distance greater than the reported distance
• C. Configure reported distance greater than the successor's feasible distance.
• D. Configure feasible distance greater than the successor's feasible distance.

Answer: B

Explanation:
Explanation
From the exhibit, we notice network 172.29.0.0/16 was learned via two routes:
+ From 192.168.254.2 with FD = 307200 and AD = 281600
+ From 192.168.253.2 with FD = 410200 and AD = 352300
The first route is installed into the RIB as the successor route because of lower FD.
When the first route fails, router will not use the second route as it does not satisfy the feasibility condition.
The feasibility condition states that, the Advertised Distance (AD, also called the reported distance) of a route must be lower than the feasible distance of the current successor route.

NEW QUESTION # 158
Refer to the exhibit.

The OSPF routing protocol is redistributed into the BGP routing protocol, but not all the OSPF routes are distributed into BGP Which action resolves the issue?

• A. Use a route-map command to redistribute OSPF external routes defined in a prefix list.
• B. Include the word external in the redistribute command
• C. Include the word internal external in the redistribute command
• D. Use a route-map command to redistribute OSPF external routes defined in an access list

Answer: C

NEW QUESTION # 159
Refer to the exhibit.


Refer to the exhibit. The IT router has been configured with the Science VRF and the interfaces have been assigned to the VRF Which set of configurations advertises Science-1 and Science-2 routes using EIGRPAS 111?

• A. Option C
• B. Option B
• C. Option D
• D. Option A

Answer: C

NEW QUESTION # 160
Refer to the exhibit.

Refer to lhe exhibit. APC is configured to obtain an IP address automatically, but it receives an IP address only from the 169.254.0.0 subnet The DHCP server logs contained no DHCPDISCOVER message from the MAC address of the PC. Which action resolves the issue?

• A. Configure an ip helper-address on the router to forward DHCP messages to the server.
• B. Configure DHCP Snooping on the switch to forward DHCP messages to the server.
• C. Configure a static IP address on the PC and exclude it from the DHCP pool.
• D. Configure a DHCP reservation on the server for the PC.

Answer: A

NEW QUESTION # 161
An engineer configured Reverse Path Forwarding on an interface and noticed that the routes are dropped when a route lookup fails on that interface for a prefix that is available in the routing table Which interface configuration resolves the issue?

• A. ip verify unicast source reachable-via any
• B. ip verify unicast source reachable-via allow-default
• C. ip verify unicast source reachable-via rx
• D. ip verify unicast source reachable-via 12-src

Answer: A

NEW QUESTION # 162
Refer to the exhibit.

When monitoring an IPv6 access list, an engineer notices that the ACL does not have any hits and is causing unnecessary traffic to pass through the interface Which command must be configured to resolve the issue?

• A. ipv6 traffic-filter INTERNET in
• B. access-class INTERNET in
• C. ipv6 access-class INTERNET in
• D. ip access-group INTERNET in

Answer: C

NEW QUESTION # 163
Which two protocols work in the control plane of P routers across the MPLS cloud? (choose two)

• A. LSP
• B. LDP
• C. ECMP
• D. MPLS OAM
• E. RSVP

Answer: B,E

NEW QUESTION # 164
......

Skills Measured in Cisco 300-410 Exam

The Cisco 300-410 test covers a wide range of skills related to the implementation and troubleshooting of advanced routing technologies and services. Below you can see the main topic areas that appear in the exam content and their weight:

• Infrastructure Security – 20%

  In the framework of this objective, the applicants are required to prove that they are capable of: fixing device security with the help of IOS AAA (local database, TACACS+, RADIUS); fixing security features, such as IPv4 access control lists, IPv6 traffic filter, unicast reverse path forwarding (uRPF); fixing control plane policing (CoPP) (OSPFT, Telnet, SSH, EIGRP, HTTP(S), BGP, SNMP); explaining IPv6 First Hop security features (ND inspection/snooping, RA guard, source guard, DHCP guard, binding table).

• VPN Technologies – 20%

  This subject combines the questions that check the applicants’ abilities to: explain MPLS operations (LSP, LSR, label switching, LDP); explain MPLS Layer 3 VPN; customize and verify single hub DMVPN (NHRP, GRE/mGRE, dynamic neighbor, IPsec, spoke-to-spoke).

• Layer 3 Technologies – 35%

  Within this domain, the examinees need to demonstrate the following skills: fixing administrative distance; fixing a route map for any routing protocol (tagging, attributes, filtering); fixing loop prevention mechanisms (route poisoning, filtering, split horizon, tagging); fixing redistribution between routing sources and any routing protocols; explaining Bidirectional Forwarding Detection; fixing manual and auto-summarization with any routing protocol; customizing and verifying policy-based routing; customizing and verifying VRF-Lite; fixing EIGRP (address IPv4 and IPv6 families, metrics, neighbor relationship and authentication, loop-free path selections, such as feasible successor, RD, FC, FD, successor, stuck in active, and load balancing); fixing v2/v3 OSPF (address IPv4 and IPv6 families, neighbor relationship and authentication, as well as router types, network types, area types); fixing external and internal BGP (policies, path preference, route reflector, neighbor relationship and authentication, address IPv4 and IPv6 families).

• Infrastructure Services – 25%

  The last topic revolves around the following skills: fixing device management (Console and VTY; SSH, Telnet, HTTP, SCP HTTPS; FTP); fixing v2c and v3 SNMP; fixing network problems with the help of logging (timestamps, local, syslog, conditional debugs, debugs); fixing IPv4 and IPv6 DHCP (DHCP options, DHCP client, DHCP relay, IOS DHCP server); fixing network performance issues with the help pf IP SLA (connectivity, jitter, delay, tracking objects); fixing flexible, v5 and v9 NetFlow; fixing network issues with the help of Cisco DNA Center assurance (network health connectivity, device health, monitoring).

 

Cisco Dumps - Learn How To Deal With The Exam Anxiety: https://www.testsimulate.com/300-410-study-materials.html