Free 2021 CCNP Enterprise 300-410 dumps are available on Google Drive shared by TestSimulate

Welcome to download the newest TestSimulate 300-410 PDF dumps: https://www.testsimulate.com/300-410-study-materials.html ( 215  Q&As)

Career Prospects

The professionals who obtain the CCNP Enterprise certification can explore a wide range of highly rewarding careers. Some of the job roles that they can take up include a Cybersecurity Sales Specialist, an Enterprise Account Executive, a Network Architect, a Senior Software Engineer, a Healthcare Networking Specialist, a Network Security Application Engineer, a Cisco Network Security Engineer, and a Cloud Infrastructure Implementation Engineer, among others. With any of these positions, the applicants can expect to earn an average of $95,000 per year. Some of them can get as much as $120,000 or more per annum. This amount will depend on their job title, working experience, and related tasks.

Cisco CCNP Enterprise 300-410 Practice Test Questions, Cisco CCNP Enterprise 300-410 Exam Practice Test Questions

The Cisco 300-410 ENARSI exam is part of the requirements for two certifications, namely CCNP Enterprise and Cisco Certified Specialist – Enterprise Advanced Infrastructure Implementation. This test equips the professionals with the skill set required to carry out various duties, such as installation, configuration, operation, and troubleshooting of an enterprise network.

 

NEW QUESTION 97
An engineer configured a leak-map command to summarize EIGRP routes and advertise specifically loopback 0 with an IP of 10.1.1.1.255.255.255.252 along with the summary route. After finishing configuration, the customer complained not receiving summary route with specific loopback address. Which two configurations will fix it? (Choose two.)

• A. Configure route-map Leak-Route permit 20.
• B. Configure route-map Leak-Route permit 10 and match access-list 1.
• C. Configure access-list 1 permit 10.1.1.1.0.0.0.252.
• D. Configure access-list 1 permit 10.1.1.0.0.0.0.3.
• E. Configure access-list 1 and match under route-map Leak-Route.

Answer: B,C

 

NEW QUESTION 98
Refer to the exhibit.

ISP 1 and ISP 2 directly connect to the Internet. A customer is tracking both ISP links to achieve redundancy and cannot see the Cisco IOS IP SLA tracking output on the router console. Which command is missing from the IP SLA configuration?

• A. Start-time immediately
• B. Start-time 00:00
• C. Start-time now
• D. Start-time 0

Answer: C

 

NEW QUESTION 99
Refer to the exhibit.

A network administrator is discovering a Cisco Catalyst 9300 and a Cisco WLC 3504 in Cisco DNA Center.
The Catalyst 9300 is added successfully However the WLC is showing [ error "uncontactable" when the administrator tries to add it in Cisco DNA Center. Which action discovers WLC in Cisco DNA Center successfully?

• A. Copy the .cert file from the Cisco DNA Center on the USB and upload it to the WLC 3504.
• B. Add the WLC 3504 under the hierarchy of the Catalyst 9300 connected devices.
• C. Delete the WLC 3504 from Cisco DNA Center and add it to Cisco DNA Center again.
• D. Copy the .pern file from the Cisco DNA Center on the USB and upload it to the WLC 3504.

Answer: D

Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-ce

 

NEW QUESTION 100
Refer to the exhibit.

An engineer wanted to set a tag of 30 to route 10 1.80.65/32 but it failed How is the issue fixed?

• A. Modify prefix-list ccnp3 to add 10.1.64.0/20 ge 32
• B. Modify route-map ospf-to-eigrp permit 10 and match prefix-list ccnp2.
• C. Modify prefix-list ccnp3 to add 10.1.64.0/20 le 24
• D. Modify route-map ospf-to-eigrp permit 30 and match prefix-list ccnp2.

Answer: B

 

NEW QUESTION 101
Refer to the exhibit.

R1 is connected with R2 via GigabitEthernet0/0, and R2 cannot ping R1. What action will fix the issue?

• A. Fix route dampening configured on the router.
• B. Replace the SFP module because it is not supported.
• C. Correct the IP SLA probe that failed.
• D. Fix IP Event Dampening configured on the interface.

Answer: D

Explanation:

 

NEW QUESTION 102
Refer to the exhibit.

An engineer is trying to connect to a device with SSH but cannot connect. The engineer connects by using the console and finds the displayed output when troubleshooting. Which command must be used in configuration mode to enable SSH on the device?

• A. ip ssh version 2
• B. crypto key generate rsa
• C. no ip ssh disable
• D. ip ssh enable

Answer: B

 

NEW QUESTION 103
Refer to the exhibit.

An engineer is trying to redistribute OSPF to BGP, but not all of the routes are redistributed. What is the reason for this issue?

• A. BGP convergence is slow, so the route will eventually be present in the BGP table
• B. By default, only internal OSPF routes are redistributed into BGP
• C. Only classful networks are redistributed from OSPF to BGP
• D. By default, only internal routes and external type 1 routes are redistributed into BGP

Answer: D

 

NEW QUESTION 104
What does IPv6 Source Guard utilize to determine if IPv6 source addresses should be forwarded?

• A. Binding Table
• B. DHCP
• C. ACLS
• D. ACE

Answer: A

Explanation:

 

NEW QUESTION 105

Refer to the exhibit. A network administrator wants to block all traffic toward the Internet after business hours and on weekends. When the administrator applies an access list on interface Gi0/1, all traffic is blocked and there is no access to the Internet at any time.
Which action resolves the issue?

• A. Add the permit ip any any time-range no-conn statement after the deny udp any any time-range no- conn command in the access list.
• B. Add the permit ip any any time-range no-conn statement after the deny icmp any any time-range no- conn command in the access list.
• C. Add the permit ip any any statement after the deny icmp any any time-range no-conn command in the access list.
• D. Add the permit allowed time-range no-conn statement after the deny icmp any any time-range no-conn command in the access list.

Answer: C

Explanation:
Section: Mixed Questions

 

NEW QUESTION 106
Drag and drop the SNMP attributes in Cisco IOS devices from the onto he correct SNMPv2c or SNMPv3 categories on the right.

Answer:

Explanation:

Explanation
SNMPv2c:
Community string
Username and password
No encryption
SNMPv3:
Authentication
Read-only
privileged

 

NEW QUESTION 107
Refer to Exhibit.

The network administrator configured the branch router for IPv6 on the E0/0 interface. The neighboring router is fully configured to meet requirements, but the neighbor relationship is not coming up. Which action fixes the problem on the branch router to bring the IPv6 neighbors up?

• A. Enable the IPv4 address family under the E0/0 interface by using the address-family ipv4 unicast command
• B. Disable OSPF for IPv4 using the no ospfv3 4 area 0 ipv4 command under the E0/0 interface
• C. Enable the IPv4 address family under the router ospfv3 4 process by using the address-family ipv4 unicast command
• D. Disable IPv6 on the E0/0 interface using the no ipv6 enable command

Answer: C

Explanation:
Explanation
Once again, Cisco changed the IOS configuration commands required for OSPFv3 configuration. The new OSPFv3 configuration uses the "ospfv3" keyword instead of the earlier "ipv6 router ospf" routing process command and "ipv6 ospf" interface commands.
The Open Shortest Path First version 3 (OSPFv3) address families feature enables both IPv4 and IPv6 unicast traffic to be supported. With this feature, users may have two processes per interface, but only one process per address family (AF).

 

NEW QUESTION 108

Refer to the exhibit. An IP SLA was configured on router R1 that allows the default route to be modified in the event that Fa0/0 loses reachability with the router R3 Fa0/0 interface. The route has changed to flow through router R2. Which debug command is used to troubleshoot this issue?

• A. debug ip flow
• B. debug ip routing
• C. debug ip sla error
• D. debug ip packet

Answer: B

Explanation:
Section: Layer 3 Technologies

 

NEW QUESTION 109
Refer to the exhibit.

Users in the branch network of 2001:db8:0:4::/64 report that they cannot access the Internet. Which command is issued in IPv6 router EIGRP 100 configuration mode to solve this issue?

• A. Issue the eigrp stub command on R1.
• B. Issue the no eigrp stub command on R2.
• C. Issue the no eigrp stub command on R1.
• D. Issue the eigrp stub command on R2.

Answer: C

 

NEW QUESTION 110
Drag and drop the packet types from the left onto the correct descriptions on the right.

Answer:

Explanation:

Explanation

Unlike legacy network technologies such as ISDN, Frame Relay, and ATM that defined separate data and control channels, IP carries all packets within a single pipe. Thus, IP network devices such as routers and switches must be able to distinguish between data plane, control plane, and management plane packets to treat each packet appropriately.From an IP traffic plane perspective, packets may be divided into four distinct, logical groups:1. Data plane packets - End-station, user-generated packets that are always forwarded by network devices to other end-station devices. From the perspective of the network device, data plane packets always have a transit destination IP address and can be handled by normal, destination IP address-based forwarding processes.2. Control plane packets - Network device generated or received packets that are used for the creation and operation of the network itself. From the perspective of the network device, control plane packets always have a receive destination IP address and are handled by the CPU in the network device route processor. Examples include protocols such as ARP, BGP, OSPF, and other protocols that glue the network together.3. Management plane packets - Network device generated or received packets, or management station generated or received packets that are used to manage the network. From the perspective of the network device, management plane packets always have a receive destination IP address and are handled by the CPU in the network device route processor. Examples include protocols such as Telnet, Secure Shell (SSH), TFTP, SNMP, FTP, NTP, and other protocols used to manage the device and/or network.4. Services plane packets - A special case of data plane packets, services plane packets are also user-generated packets that are also forwarded by network devices to other end-station devices, but that require high-touch handling by the network device (above and beyond normal, destination IP address-based forwarding) to forward the packet. Examples of high-touch handling include such functions as GRE encapsulation, QoS, MPLS VPNs, and SSL/IPsec encryption/decryption, etc. From the perspective of the network device, services plane packets may have a transit destination IP address, or may have a receive destination IP address (for example, in the case of a VPN tunnel endpoint).

 

NEW QUESTION 111

Refer to the exhibit. Which control plane policy limits BGP traffic that is destined to the CPU to 1 Mbps and ignores BGP traffic that is sent at higher rate?

• A. policy-map POLICE_BGP
• B. policy-map COPP
• C. policy-map LIMIT_BGP
• D. policy-map SHAPE_BGP

Answer: B

Explanation:
Section: Infrastructure Security

 

NEW QUESTION 112
An engineer configured access list NON-CISCO in a policy to influence routes

What are the two effects of this route map configuration? (Choose two.)

• A. Packets are dropped by the access list.
• B. Packets are forwarded to the default gateway.
• C. Packets are forwarded using normal route lookup.
• D. Packets are not evaluated by sequence 10.
• E. Packets are evaluated by sequence 10.

Answer: B,E

 

NEW QUESTION 113
Which IGPs are supported by the MPLS LDP autoconfiguration feature?

• A. OSPF and EIGRP
• B. OSPF and ISIS
• C. RIPv2 and OSPF
• D. ISIS and RIPv2

Answer: B

Explanation:

 

NEW QUESTION 114
......

Tested Material Used To 300-410: https://www.testsimulate.com/300-410-study-materials.html