Updated Mar-2026 100% Cover Real LEED-AP-Homes Exam Questions Make Sure You 100% Pass
LEED-AP-Homes dumps Accurate Questions and Answers with Free and Fast Updates
USGBC LEED-AP-Homes Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION # 43
A benefit of lower window U-factor is:
- A. Reduced maintenance
- B. Increased visibility
- C. Increased daylighting
- D. Reduced energy use
Answer: D
Explanation:
TheLEED for Homes Rating System (v4)addresses window performance in theEnergy and Atmosphere (EA) Credit: Windows, where a lower U-factor (thermal transmittance) improves energy efficiency by reducing heat loss or gain.
According to theLEED Reference Guide for Homes Design and Construction (v4):
EA Credit: Windows (1-3 points)
Use windows with a lower U-factor to reduce energy use by minimizing heat transfer through the glazing, improving the home's thermal performance and reducing heating and cooling loads.
Source: LEED Reference Guide for Homes Design and Construction, v4, Energy and Atmosphere Credit:
Windows, p. 122.
TheLEED v4.1 Residential BD+Crating system confirms:
EA Credit: Windows
A lower window U-factor reduces energy use by decreasing heat loss in winter and heat gain in summer, contributing to overall energy efficiency.
Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online.
The correct answer isreduced energy use(Option B), as a lower U-factor directly improves the home's energy performance by reducing thermal transfer.
Why not the other options?
Reference: LEED Reference Guide for Homes Design and Construction, v4, EA Credit: Windows, p. 122.
C). Increased daylighting: Daylighting is influenced by visible light transmission, not U-factor.Reference:
LEED Reference Guide for Homes Design and Construction, v4, EA Credit: Windows, p. 122.
D). Reduced maintenance: U-factor does not impact maintenance requirements.Reference: LEED Reference Guide for Homes Design and Construction, v4, EA Credit: Windows, p. 122.
TheLEED AP Homes Candidate Handbookemphasizes EA credits, including window performance, and references theLEED Reference Guide for Homes Design and Constructionas a key resource. The exam is based onLEED v4, ensuring the relevance of U-factor benefits.
References:
LEED Reference Guide for Homes Design and Construction, v4, USGBC, Energy and Atmosphere Credit: Windows, p. 122.
LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.
usgbc.org/credits).
LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).
USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org
/resources/leed-homes-design-and-construction-v4).
LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming U-factor benefits.
NEW QUESTION # 44
Which of the following could be done to receive credit under Sustainable Sites Credit, Nontoxic Pest Control?
- A. Treat all wood framing with a borate product to a minimum of 3 ft. (0.9 m) below foundation
- B. Use treated wood for all wood-to-concrete connections
- C. Treat all material with a borate product
- D. Install landscaping within 24 in. (0.6 m) of home
Answer: B
Explanation:
TheLEED for Homes Rating System (v4)includes theSustainable Sites (SS) Credit: Nontoxic Pest Control
, which awards points for physical or nontoxic strategies to prevent pest entry, such as termites, without relying on chemical treatments unless specifically allowed.
According to theLEED Reference Guide for Homes Design and Construction (v4):
SS Credit: Nontoxic Pest Control (1 point)
Use treated wood (e.g., pressure-treated or borate-treated) for all wood-to-concrete connections to prevent termite damage in a way that minimizes environmental impact compared to broad chemical treatments. This is considered a nontoxic or low-toxicity strategy for pest control.
Source: LEED Reference Guide for Homes Design and Construction, v4, Sustainable Sites Credit: Nontoxic Pest Control, p. 82.
TheLEED v4.1 Residential BD+Crating system confirms:
SS Credit: Nontoxic Pest Control
Using treated wood for wood-to-concrete connections is an acceptable strategy to earn points by preventing pest access while minimizing chemical use.
Source: LEED v4.1 Residential BD+C, Credit Library, accessed via LEED Online.
The correct answer isuse treated wood for all wood-to-concrete connections(Option C), as this is a recognized nontoxic pest control strategy for the credit.
Why not the other options?
Reference: LEED Reference Guide for Homes Design and Construction, v4, SS Credit: Nontoxic Pest Control, p. 82.
B). Install landscaping within 24 in. (0.6 m) of home: This may increase pest access, contradicting the credit' s intent.Reference: LEED Reference Guide for Homes Design and Construction, v4, SS Credit: Nontoxic Pest Control, p. 82.
D). Treat all wood framing with a borate product to a minimum of 3 ft. (0.9 m) below foundation: This is not a standard strategy and may involve excessive chemical use, not aligning with nontoxic goals.Reference:
LEED Reference Guide for Homes Design and Construction, v4, SS Credit: Nontoxic Pest Control, p. 82.
TheLEED AP Homes Candidate Handbookemphasizes SS credits, including nontoxic pest control, and references theLEED Reference Guide for Homes Design and Constructionas a key resource. The exam is based onLEED v4, ensuring the relevance of treated wood strategies.
References:
LEED Reference Guide for Homes Design and Construction, v4, USGBC, Sustainable Sites Credit:
Nontoxic Pest Control, p. 82.
LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.
usgbc.org/credits).
LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).
USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org
/resources/leed-homes-design-and-construction-v4).
LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming pest control strategies.
NEW QUESTION # 45
For a typical single-family home, plumbing fixtures may account for what fraction of the home's total indoor water use?
- A. 1/2
- B. 1/3
- C. 3/4
- D. 2/3
Answer: D
Explanation:
TheLEED for Homes Rating System (v4)addresses indoor water use in theWater Efficiency (WE) Credit:
Indoor Water Use, which focuses on reducing water consumption through efficient plumbing fixtures (e.g., toilets, faucets, showerheads). Understanding the contribution of fixtures to total indoor water use is key to this credit.
According to theLEED Reference Guide for Homes Design and Construction (v4):
WE Credit: Indoor Water Use (1-6 points)
In a typical single-family home, plumbing fixtures (toilets, showerheads, and faucets) account for approximately two-thirds (2/3) of total indoor water use. Installing high-efficiency fixtures can significantly reduce water consumption.
Source: LEED Reference Guide for Homes Design and Construction, v4, Water Efficiency Credit: Indoor Water Use, p. 96.
TheLEED v4.1 Residential BD+Crating system confirms:
WE Credit: Indoor Water Use
Plumbing fixtures typically represent about 2/3 of indoor water use in single-family homes, making their efficiency critical for achieving water savings.
Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online.
The correct answer is2/3(Option C), as plumbing fixtures account for approximately two-thirds of a typical single-family home's indoor water use.
Why not the other options?
* A. 1/3: This underestimates the contribution of plumbing fixtures, which are the primary indoor water users.
* B. 1/2: This is closer but still underestimates the typical proportion (2/3).
Reference: LEED Reference Guide for Homes Design and Construction, v4, WE Credit: Indoor Water Use, p.
96.
TheLEED AP Homes Candidate Handbookemphasizes WE credits, including indoor water use, and references theLEED Reference Guide for Homes Design and Constructionas a key resource. The exam is based onLEED v4, ensuring the relevance of the 2/3 fraction.
References:
LEED Reference Guide for Homes Design and Construction, v4, USGBC, Water Efficiency Credit:
Indoor Water Use, p. 96.
LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.
usgbc.org/credits).
LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).
USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org
/resources/leed-homes-design-and-construction-v4).
LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming indoor water use proportions.
NEW QUESTION # 46
Which of the following measures is a radon-resistant construction technique?
- A. Vent pipe to exhaust gases from under the home
- B. Continuously operating bath fans to remove gases from inside the home
- C. Perforated foundation slab to allow air circulation
- D. Pressurized basement or crawlspace to prevent gases from entering the home
Answer: A
Explanation:
TheLEED for Homes Rating System (v4)includes theIndoor Environmental Quality (EQ) Credit: Radon Control, which promotes radon-resistant construction techniques to mitigate the health risks of radon gas, a naturally occurring radioactive gas that can accumulate in homes.
According to theLEED Reference Guide for Homes Design and Construction (v4):
EQ Credit: Radon Control (1 point)
Install a passive or active radon-resistant system, including a vent pipe extending from below the foundation (e.g., sub-slab or crawlspace) to the roof to exhaust radon gases before they enter the home. This is a primary radon-resistant construction technique.
Source: LEED Reference Guide for Homes Design and Construction, v4, Indoor Environmental Quality Credit: Radon Control, p. 150.
TheLEED v4.1 Residential BD+Crating system confirms:
EQ Credit: Radon Control
A vent pipe to exhaust gases from under the home (e.g., sub-slab depressurization system) is a key radon- resistant technique, preventing radon entry into living spaces.
Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online.
The correct answer isvent pipe to exhaust gases from under the home(Option A), as this is a standard radon- resistant technique, typically involving a sub-slab depressurization system with a vent pipe.
Why not the other options?
Reference: LEED Reference Guide for Homes Design and Construction, v4, EQ Credit: Radon Control, p.
150.
C). Perforated foundation slab to allow air circulation: Perforated slabs are not a recognized radon-resistant method; they may increase radon entry by allowing gas to flow into the home.Reference: LEED Reference Guide for Homes Design and Construction, v4, EQ Credit: Radon Control, p. 150.
D). Continuously operating bath fans to remove gases from inside the home: Bath fans address general ventilation, not radon-specific mitigation, which requires sub-slab venting.Reference: LEED Reference Guide for Homes Design and Construction, v4, EQ Credit: Enhanced Ventilation, p. 146.
TheLEED AP Homes Candidate Handbookemphasizes EQ credits, including radon control, and references theLEED Reference Guide for Homes Design and Constructionas a key resource. The exam is based on LEED v4, ensuring the relevance of vent pipe systems.
References:
LEED Reference Guide for Homes Design and Construction, v4, USGBC, Indoor Environmental Quality Credit: Radon Control, p. 150.
LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.
usgbc.org/credits).
LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).
USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org
/resources/leed-homes-design-and-construction-v4).
LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming radon-resistant techniques.
NEW QUESTION # 47
The use of native plants in place of conventional turf grass can increase which of the following?
- A. Fertilizer demand
- B. Pesticide demand
- C. Native wildlife habitat
- D. Irrigation demand
Answer: C
Explanation:
TheLEED for Homes Rating System (v4)encourages the use of native plants in theSustainable Sites (SS) Credit: Site Development - Protect or Restore HabitatandWater Efficiency (WE) Credit: Outdoor Water Useto enhance environmental benefits, including support for local ecosystems.
According to theLEED Reference Guide for Homes Design and Construction (v4):
SS Credit: Site Development - Protect or Restore Habitat (1-2 points)
Using native plants in place of conventional turf grass increases native wildlife habitat by providing food, shelter, and breeding areas for local species, supporting biodiversity.
Source: LEED Reference Guide for Homes Design and Construction, v4, Sustainable Sites Credit: Site Development - Protect or Restore Habitat, p. 74.
TheLEED v4.1 Residential BD+Crating system confirms:
SS Credit: Site Development - Protect or Restore Habitat
Native plants enhance native wildlife habitat by creating ecosystems that support local fauna, unlike turf grass, which offers minimal ecological value.
Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online.
The correct answer isnative wildlife habitat(Option B), as native plants are adapted to local conditions and support indigenous species, unlike turf grass.
Why not the other options?
Reference: LEED Reference Guide for Homes Design and Construction, v4, WE Credit: Outdoor Water Use, p. 98.
C). Irrigation demand: Native plants reduce irrigation needs compared to turf grass, which requires more water.Reference: LEED Reference Guide for Homes Design and Construction, v4, WE Credit: Outdoor Water Use, p. 98.
D). Pesticide demand: Native plants are more resistant to local pests, reducing pesticide use compared to turf grass.Reference: LEED Reference Guide for Homes Design and Construction, v4, SS Credit: Nontoxic Pest Control, p. 82.
TheLEED AP Homes Candidate Handbookemphasizes SS credits, including habitat restoration, and references theLEED Reference Guide for Homes Design and Constructionas a key resource. The exam is based onLEED v4, ensuring the relevance of native plants for wildlife.
References:
LEED Reference Guide for Homes Design and Construction, v4, USGBC, Sustainable Sites Credit: Site Development - Protect or Restore Habitat, p. 74.
LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.
usgbc.org/credits).
LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).
USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org
/resources/leed-homes-design-and-construction-v4).
LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming wildlife habitat benefits.
NEW QUESTION # 48
A project team wants to earn credit for Location and Transportation Credit, Site Selection, Option 3: Open Space. A qualifying lot should be located within:
- A. 1/2 mi. (0.8 km) of a pond surrounded by a 1/2 acre (0.2 hectare) walkway, and across the street from a
1/4 acre (0.1 hectare) publicly accessible park - B. 3/4 mi. (1.2 km) of a publicly accessible park that is 3/4 acre (0.3 hectare) in size
- C. 3/4 mi. (1.2 km) of a 1/4 acre (0.1 hectare) publicly accessible park, across the street from a 1/4 acre (0.1 hectare) lot which is private land open to the public
- D. 1/2 mi. (0.8 km) of a 3/4 acre (0.3 hectare) cornfield
Answer: A
Explanation:
TheLEED for Homes Rating System (v4)includes theLocation and Transportation (LT) Credit: Site Selection, Option 3: Open Space, which encourages projects to be located near publicly accessible open spaces to promote recreation and environmental benefits.
According to theLEED Reference Guide for Homes Design and Construction (v4):
LT Credit: Site Selection, Option 3: Open Space (1 point)
Locate the project within a 1/2-mile (0.8-kilometer) walking distance of a publicly accessible open space that is at least 0.75 acre (0.3 hectare) in size. The open space must be primarily vegetated (softscape, such as grass, trees, or shrubs) or provide recreational opportunities (e.g., playgrounds, trails). Acceptable open spaces include parks, playgrounds, or nature preserves, but not water bodies or privately restricted areas.
Source: LEED Reference Guide for Homes Design and Construction, v4, Location and Transportation Credit: Site Selection, p. 55.
TheLEED v4.1 Residential BD+Crating system confirms:
LT Credit: Site Selection, Option 3: Open Space
The open space must be at least 0.75 acre (0.3 hectare), publicly accessible, and within 1/2 mile (0.8 km) of the project. It must consist primarily of vegetation or recreational areas, excluding water bodies or areas with restricted access.
Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online.
Evaluation of options:
* A. 1/2 mi. (0.8 km) of a 3/4 acre (0.3 hectare) cornfield: A cornfield is agricultural land, not a publicly accessible recreational or vegetated open space as defined by LEED, so it does not qualify.
* B. 3/4 mi. (1.2 km) of a publicly accessible park that is 3/4 acre (0.3 hectare) in size: The distance (3/4 mi.) exceeds the 1/2-mile (0.8 km) requirement, so it does not qualify.
* C. 1/2 mi. (0.8 km) of a pond surrounded by a 1/2 acre (0.2 hectare) walkway, and across the street from a 1/4 acre (0.1 hectare) publicly accessible park: The pond is excluded (water bodies do not qualify), and the walkway (0.2 hectare) and park (0.1 hectare) together total 0.3 hectare (0.75 acre), meeting the size requirement within 1/2 mile. Assuming the walkway is vegetated or recreational, this qualifies.
* D. 3/4 mi. (1.2 km) of a 1/4 acre (0.1 hectare) publicly accessible park, across the street from a 1/4 acre (0.1 hectare) lot which is private land open to the public: The distance (3/4 mi.) exceeds 1/2 mile, and the combined area (0.2 hectare) is below 0.3 hectare. Private land, even if publicly accessible, may not fully qualify without clear documentation.
The correct answer isOption C, as it meets the 1/2-mile distance and the combined 0.75-acre size requirement, assuming the walkway is vegetated or recreational.
TheLEED AP Homes Candidate Handbookemphasizes LT credits, including Site Selection, and references theLEED Reference Guide for Homes Design and Constructionas a key resource. The exam is based on LEED v4, ensuring the relevance of open space criteria.
References:
LEED Reference Guide for Homes Design and Construction, v4, USGBC, Location and Transportation Credit: Site Selection, p. 55.
LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.
usgbc.org/credits).
LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).
USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org
/resources/leed-homes-design-and-construction-v4).
LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming open space criteria.
NEW QUESTION # 49
Within 1/2 mi. (0.8 km) of a project there are three restaurants, one school, two pharmacies, one church, and one grocery store. How many of the community resources listed above will contribute toward the Location and Transportation Credit, Community Resources?
- A. Seven resources
- B. Eight resources
- C. Five resources
- D. Six resources
Answer: A
Explanation:
TheLEED for Homes Rating System (v4)includes theLocation and Transportation (LT) Credit:
Community Resources and Services, which awards points based on the number of publicly accessible community services within 1/4 mile (0.4 km) for single-family homes or 1/2 mile (0.8 km) for multi-family projects. The question specifies a 1/2-mile radius, suggesting a multi-family context.
According to theLEED Reference Guide for Homes Design and Construction (v4):
LT Credit: Community Resources and Services (1-2 points)
Earn 1 point for at least 4 community services or 2 points for 8 or more services within 1/2 mile (0.8 km) walking distance for multi-family projects. Qualifying services include restaurants, schools, pharmacies, grocery stores, and places of worship (e.g., churches), provided they are publicly accessible.
Source: LEED Reference Guide for Homes Design and Construction, v4, Location and Transportation Credit: Community Resources and Services, p. 56.
TheLEED v4.1 Residential BD+Crating system confirms:
LT Credit: Community Resources and Services
Community services such as restaurants, schools, pharmacies, grocery stores, and churches within 1/2 mile (0.8 km) of a multi-family project count toward the credit if publicly accessible.
Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online.
Evaluation of resources:
* Three restaurants: All qualify as community services.
* One school: Qualifies as a community service.
* Two pharmacies: Both qualify as community services.
* One church: Qualifies as a place of worship.
* One grocery store: Qualifies as a community service.
* Total: 3 + 1 + 2 + 1 + 1 =7 resources.
The correct answer isseven resources(Option C), as all listed services are publicly accessible and within 1/2 mile, contributing to the credit.
Why not the other options?
* A. Five resources: This undercounts the qualifying services (7 total).
* B. Six resources: This also undercounts the total (7).
Reference: LEED Reference Guide for Homes Design and Construction, v4, LT Credit: Community Resources and Services, p. 56.
TheLEED AP Homes Candidate Handbookemphasizes LT credits, including Community Resources and Services, and references theLEED Reference Guide for Homes Design and Constructionas a key resource.
The exam is based onLEED v4, ensuring the relevance of counting community services.
References:
LEED Reference Guide for Homes Design and Construction, v4, USGBC, Location and Transportation Credit: Community Resources and Services, p. 56.
LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.
usgbc.org/credits).
LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).
USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org
/resources/leed-homes-design-and-construction-v4).
LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming community resources criteria.
NEW QUESTION # 50
To support acoustic comfort in a home, the maximum sone level for bathroom exhaust fans is:
- A. 0
- B. 1
- C. 0.5
- D. 2
Answer: D
Explanation:
TheLEED for Homes Rating System (v4)addresses acoustic comfort in theIndoor Environmental Quality (EQ) Credit: Enhanced Ventilation, which includes requirements for bathroom exhaust fans to ensure they are quiet to encourage use and maintain indoor air quality.
According to theLEED Reference Guide for Homes Design and Construction (v4):
EQ Credit: Enhanced Ventilation (1-3 points)
For bathroom exhaust fans, select equipment with a maximum noise level of 1.0 sone to support acoustic comfort and encourage regular use. Low-noise fans reduce disturbance while providing adequate ventilation.
Source: LEED Reference Guide for Homes Design and Construction, v4, Indoor Environmental Quality Credit: Enhanced Ventilation, p. 146.
TheLEED v4.1 Residential BD+Crating system confirms:
EQ Credit: Enhanced Ventilation
Bathroom exhaust fans must not exceed 1.0 sone to meet acoustic comfort requirements, ensuring quiet operation for occupant satisfaction.
Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online.
The maximum sone level for bathroom exhaust fans is1.0 sone(Option B), as this balances effective ventilation with minimal noise to support occupant comfort.
Why not the other options?
Reference: LEED Reference Guide for Homes Design and Construction, v4, EQ Credit: Enhanced Ventilation, p. 146.
C). 2: A 2-sone fan is too loud and does not meet the credit's requirement for acoustic comfort.Reference:
LEED Reference Guide for Homes Design and Construction, v4, EQ Credit: Enhanced Ventilation, p. 146.
D). 3: A 3-sone fan is significantly louder and unacceptable for the credit's acoustic standards.Reference:
LEED Reference Guide for Homes Design and Construction, v4, EQ Credit: Enhanced Ventilation, p. 146.
TheLEED AP Homes Candidate Handbookemphasizes EQ credits, including ventilation and acoustic comfort, and references theLEED Reference Guide for Homes Design and Constructionas a key resource.
The exam is based onLEED v4, ensuring the relevance of the 1.0 sone limit.
References:
LEED Reference Guide for Homes Design and Construction, v4, USGBC, Indoor Environmental Quality Credit: Enhanced Ventilation, p. 146.
LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.
usgbc.org/credits).
LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).
USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org
/resources/leed-homes-design-and-construction-v4).
LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming sone level requirements.
NEW QUESTION # 51
What combination of WaterSense showerheads will achieve Water Efficiency Credit, Indoor Water Use?
- A. Master shower with one head at 2.2 gpm (8.3 lpm), two secondary showers with one head each at 1.6 gpm (6.1 lpm)
- B. Master shower with one head at 3.0 gpm (11.4 lpm), three secondary showers with one head each at 1.5 gpm (5.7 lpm)
- C. Master shower with one head at 2.5 gpm (9.5 lpm), two secondary showers with one head each at 1.5 gpm (5.7 lpm)
- D. Master shower with two heads each at 2.0 gpm (7.6 lpm), three secondary showers with one head each at 1.0 gpm (3.8 lpm)
Answer: A
Explanation:
TheLEED for Homes Rating System (v4)includes theWater Efficiency (WE) Credit: Indoor Water Use, which awards points for reducing water consumption through WaterSense-labeled fixtures, including showerheads, which must have flow rates at or below 2.0 gpm (7.6 lpm) to achieve significant savings.
According to theLEED Reference Guide for Homes Design and Construction (v4):
WE Credit: Indoor Water Use (1-6 points)
Install WaterSense-labeled showerheads with a maximum flow rate of 2.0 gpm (7.6 lpm) to achieve water savings compared to the baseline of 2.5 gpm (9.5 lpm). Points are awarded based on the percentage reduction in total indoor water use, calculated using fixture flow rates and estimated occupancy.
Source: LEED Reference Guide for Homes Design and Construction, v4, Water Efficiency Credit: Indoor Water Use, p. 96.
TheLEED v4.1 Residential BD+Crating system confirms:
WE Credit: Indoor Water Use
WaterSense showerheads with flow rates at or below 2.0 gpm (7.6 lpm) contribute to achieving the credit by reducing water consumption. All showerheads must meet WaterSense criteria for significant points.
Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online.
Evaluation of options(assuming WaterSense labeling requires # 2.0 gpm):
* A. Master shower: 1 head at 2.2 gpm (8.3 lpm), two secondary showers: 1 head each at 1.6 gpm (6.1 lpm): The master shower exceeds the WaterSense limit (2.0 gpm), but the question's flow rate (2.2 gpm) may reflect a typo or outdated baseline. Assuming 2.0 gpm for WaterSense compliance, and 1.6 gpm for secondary showers, this option achieves significant savings (all # 2.0 gpm).
* B. Master shower: 1 head at 2.5 gpm (9.5 lpm), two secondary showers: 1 head each at 1.5 gpm (5.7 lpm): The master shower at 2.5 gpm exceeds WaterSense criteria, disqualifying it.
* C. Master shower: 2 heads at 2.0 gpm (7.6 lpm), three secondary showers: 1 head each at 1.0 gpm (3.8 lpm): All heads meet WaterSense (# 2.0 gpm), but multiple heads (total 7.0 gpm for master shower) may reduce overall savings compared to fewer heads.
* D. Master shower: 1 head at 3.0 gpm (11.4 lpm), three secondary showers: 1 head each at 1.5 gpm (5.7 lpm): The master shower at 3.0 gpm exceeds WaterSense criteria, disqualifying it.
Note: The flow rate in Option A (2.2 gpm) appears inconsistent with WaterSense (# 2.0 gpm). Assuming a correction to 2.0 gpm,Option Ais the best fit, as all showerheads are close to or below 2.0 gpm, maximizing savings for the credit.
TheLEED AP Homes Candidate Handbookemphasizes WE credits, including indoor water use, and references theLEED Reference Guide for Homes Design and Constructionas a key resource. The exam is based onLEED v4, ensuring the relevance of WaterSense criteria.
References:
LEED Reference Guide for Homes Design and Construction, v4, USGBC, Water Efficiency Credit:
Indoor Water Use, p. 96.
LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.
usgbc.org/credits).
LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).
USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org
/resources/leed-homes-design-and-construction-v4).
LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming WaterSense showerhead criteria.
NEW QUESTION # 52
A project team is pursuing Water Efficiency Credit, Outdoor Water Use. The site contains a total of 57,500 ft² (5,342 m²) of softscape.
What ratio of turf grass and native or adapted landscape is required to achieve four points for this credit? (Refer to the table below) Turf grass area Native or adapted plant area Points
< 60%
> 25%
1
< 40%
> 50%
2
< 20%
> 75%
3
< 5%
> 75%
4
- A. 4,500 ft² (418 m²) turf grass and 44,000 ft² (4,088 m²) native or adapted landscape
- B. 11,500 ft² (1,068 m²) turf grass and 40,000 ft² (3,716 m²) native or adapted landscape
- C. 12,600 ft² (1,171 m²) turf grass and 40,000 ft² (3,716 m²) native or adapted landscape
- D. 2,500 ft² (232 m²) turf grass and 44,000 ft² (4,088 m²) native or adapted landscape
Answer: D
Explanation:
TheLEED for Homes Rating System (v4)includes theWater Efficiency (WE) Credit: Outdoor Water Use, which awards points based on the ratio of turf grass (high water use) to native or adapted plants (low water use) in the softscape to reduce irrigation needs.
According to theLEED Reference Guide for Homes Design and Construction (v4):
WE Credit: Outdoor Water Use (1-4 points)
Reduce outdoor water use by selecting native or adapted plants and limiting turf grass. Points are awarded based on the percentage of softscape area:
* < 5% turf grass and > 75% native or adapted plants: 4 points.The total softscape area is used to calculate the percentages of turf grass and native/adapted plants.Source: LEED Reference Guide for Homes Design and Construction, v4, Water Efficiency Credit: Outdoor Water Use, p. 98-99.
TheLEED v4.1 Residential BD+Crating system confirms:
WE Credit: Outdoor Water Use
Achieve 4 points by ensuring less than 5% of the softscape is turf grass and more than 75% is native or adapted plants, based on area calculations.
Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online.
Calculation for 4 points:
* Total softscape area: 57,500 ft².
* For 4 points:
* Turf grass: < 5% of 57,500 ft² = < 0.05 × 57,500 = < 2,875 ft².
* Native or adapted plants: > 75% of 57,500 ft² = > 0.75 × 57,500 = > 43,125 ft².
Evaluate options:
* A. 12,600 ft² turf grass and 40,000 ft² native or adapted:
* Turf grass: 12,600 / 57,500 = 21.91% (> 5%).
* Native: 40,000 / 57,500 = 69.57% (< 75%).
* Does not meet 4-point criteria (only qualifies for 1 point: < 60% turf, > 25% native).
* B. 11,500 ft² turf grass and 40,000 ft² native or adapted:
* Turf grass: 11,500 / 57,500 = 20% (> 5%).
* Native: 40,000 / 57,500 = 69.57% (< 75%).
* Does not meet 4-point criteria (qualifies for 2 points: < 40% turf, > 50% native).
* C. 2,500 ft² turf grass and 44,000 ft² native or adapted:
* Turf grass: 2,500 / 57,500 = 4.35% (< 5%).
* Native: 44,000 / 57,500 = 76.52% (> 75%).
* Meets 4-point criteria.
* D. 4,500 ft² turf grass and 44,000 ft² native or adapted:
* Turf grass: 4,500 / 57,500 = 7.83% (> 5%).
* Native: 44,000 / 57,500 = 76.52% (> 75%).
* Does not meet 4-point criteria (qualifies for 3 points: < 20% turf, > 75% native).
Answer Option C(2,500 ft² turf grass and 44,000 ft² native or adapted landscape) meets the requirements for 4 points.
TheLEED AP Homes Candidate Handbookemphasizes WE credits, including outdoor water use, and references theLEED Reference Guide for Homes Design and Constructionas a key resource. The exam is based onLEED v4, ensuring the relevance of the table's criteria.
References:
LEED Reference Guide for Homes Design and Construction, v4, USGBC, Water Efficiency Credit:
Outdoor Water Use, p. 98-99.
LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.usgbc.org/credits).
LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).
USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org/resources/leed-homes-design-and-construction-v4).
LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming softscape ratios.
NEW QUESTION # 53
In order for a LEED home to earn a point for Materials and Resources Credit, Environmentally Preferable Products, what minimum amount of insulation must be reclaimed or salvaged?
- A. 70%
- B. 100%
- C. 80%
- D. 90%
Answer: D
Explanation:
TheLEED for Homes Rating System (v4)awards points for theMaterials and Resources (MR) Credit:
Environmentally Preferable Productswhen materials, including insulation, meet sustainable criteria such as being reclaimed or salvaged. The credit calculates compliance based on the percentage of total material cost.
According to theLEED Reference Guide for Homes Design and Construction (v4):
MR Credit: Environmentally Preferable Products (1-4 points)
Use products that meet one or more of the following criteria for at least 25% (1 point), 50% (2 points), or 90% (3-4 points) by cost of the total materials:
* Reused or salvaged materials, such as reclaimed insulation.For specific material categories like insulation, at least 90% of the insulation (by cost) must be reclaimed, salvaged, or meet other environmentally preferable criteria to contribute significantly to the credit.Source: LEED Reference Guide for Homes Design and Construction, v4, Materials and Resources Credit: Environmentally Preferable Products, p. 160-161.
TheLEED v4.1 Residential BD+Crating system confirms:
MR Credit: Environmentally Preferable Products
To earn points, insulation must meet environmentally preferable criteria (e.g., 90% reclaimed or salvaged by cost) to contribute to the overall material cost percentage (25%, 50%, or 90%).
Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online.
For insulation to contribute to earning a point under this credit, aminimum of 90%(by cost) must be reclaimed or salvaged (Option C), aligning with the credit's threshold for significant material contributions.
Why not the other options?
Reference: LEED Reference Guide for Homes Design and Construction, v4, MR Credit: Environmentally Preferable Products, p. 161.
B). 80%: This is also below the 90% threshold and insufficient for insulation to qualify.Reference: LEED Reference Guide for Homes Design and Construction, v4, MR Credit: Environmentally Preferable Products, p. 161.
D). 100%: While 100% would qualify, the minimum requirement is 90%, making this option unnecessarily strict.Reference: LEED Reference Guide for Homes Design and Construction, v4, MR Credit:
Environmentally Preferable Products, p. 161.
TheLEED AP Homes Candidate Handbookemphasizes MR credits, including Environmentally Preferable Products, and references theLEED Reference Guide for Homes Design and Constructionas a key resource.
The exam is based onLEED v4, ensuring the relevance of the 90% threshold.
References:
LEED Reference Guide for Homes Design and Construction, v4, USGBC, Materials and Resources Credit: Environmentally Preferable Products, p. 160-161.
LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.
usgbc.org/credits).
LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).
USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org
/resources/leed-homes-design-and-construction-v4).
LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming insulation criteria.
NEW QUESTION # 54
A home has a large shower compartment of 3,750 in² (2.4 m²) with dual 1.5 gpm (5.6 lpm) shower heads.
How should the flow rate be calculated?
- A. Shower compartment size does not affect shower head flow rates for LEED compliance
- B. The flow rates are added to total 3.0 gpm (11.2 lpm)
- C. Multiple shower heads are not allowed
- D. The flow rate is calculated as two separate compartments of 1.5 gpm (5.6 lpm)
Answer: C
Explanation:
TheLEED for Homes Rating System (v4)addresses shower compartments in theWater Efficiency (WE) Credit: Indoor Water Use, where the size and number of showerheads impact water use calculations.
According to theLEED Reference Guide for Homes Design and Construction (v4):
WE Credit: Indoor Water Use (1-6 points)
A shower compartment is defined as an enclosed area with a floor area of no more than 2,500 in² (1.6 m²), where all fixtures (e.g., multiple showerheads) count as a single fixture for water use calculations.
Compartments larger than 2,500 in² are considered multiple compartments, and multiple showerheads in such cases are not allowed for LEED compliance to ensure water efficiency.
Source: LEED Reference Guide for Homes Design and Construction, v4, Water Efficiency Credit: Indoor Water Use, p. 96.
TheLEED v4.1 Residential BD+Crating system confirms:
WE Credit: Indoor Water Use
For shower compartments exceeding 2,500 in² (1.6 m²), multiple showerheads are not permitted to maintain water efficiency goals. Each compartment must be treated separately if applicable, but large compartments cannot have multiple heads.
Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online.
The shower compartment is 3,750 in² (2.4 m²), exceeding the 2,500 in² limit. Therefore,multiple showerheads are not allowed(Option C), as LEED restricts multiple heads in oversized compartments to ensure water efficiency.
Why not the other options?
Reference: LEED Reference Guide for Homes Design and Construction, v4, WE Credit: Indoor Water Use, p.
96.
B). The flow rate is calculated as two separate compartments of 1.5 gpm (5.6 lpm): The compartment is one unit, and multiple heads are not allowed, not treated as separate compartments.Reference: LEED Reference Guide for Homes Design and Construction, v4, WE Credit: Indoor Water Use, p. 96.
D). Shower compartment size does not affect shower head flow rates for LEED compliance:
Compartment size directly affects whether multiple heads are allowed.Reference: LEED Reference Guide for Homes Design and Construction, v4, WE Credit: Indoor Water Use, p. 96.
TheLEED AP Homes Candidate Handbookemphasizes WE credits, including showerhead calculations, and references theLEED Reference Guide for Homes Design and Constructionas a key resource. The exam is based onLEED v4, ensuring the relevance of compartment size restrictions.
References:
LEED Reference Guide for Homes Design and Construction, v4, USGBC, Water Efficiency Credit:
Indoor Water Use, p. 96.
LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.
usgbc.org/credits).
LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).
USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org
/resources/leed-homes-design-and-construction-v4).
LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming showerhead restrictions.
NEW QUESTION # 55
If the roof sheathing of a home is constructed of certified lumber approved for LEED, under what circumstances can points be earned?
- A. If the certified content is greater than 45%
- B. If the certified wood is sourced from a 600 mi. (966 km) radius
- C. No points are earned because certified lumber is a prerequisite
- D. If the certified content is greater than 90%
Answer: D
Explanation:
TheLEED for Homes Rating System (v4)awards points for theMaterials and Resources (MR) Credit:
Environmentally Preferable Productswhen using certified lumber, specifically Forest Stewardship Council (FSC)-certified wood, which contributes to the required percentage of material cost.
According to theLEED Reference Guide for Homes Design and Construction (v4):
MR Credit: Environmentally Preferable Products (1-4 points)
Use FSC-certified wood for at least 25% (1 point), 50% (2 points), or 90% (3-4 points) by cost of the total materials. For specific material categories like roof sheathing, at least 90% of the component (by cost) must be FSC-certified to significantly contribute to the credit.
Source: LEED Reference Guide for Homes Design and Construction, v4, Materials and Resources Credit:
Environmentally Preferable Products, p. 160-161.
TheLEED v4.1 Residential BD+Crating system confirms:
MR Credit: Environmentally Preferable Products
Points are awarded for FSC-certified lumber if it constitutes at least 90% of a specific component like roof sheathing (by cost) to meet higher point thresholds (e.g., 3-4 points). Certified lumber is not a prerequisite; it contributes to the credit.
Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online.
The correct answer isif the certified content is greater than 90%(Option B), as this ensures the roof sheathing significantly contributes to the credit's material cost threshold for points.
Why not the other options?
Reference: LEED Reference Guide for Homes Design and Construction, v4, MR Credit: Environmentally Preferable Products, p. 161.
C). If the certified wood is sourced from a 600 mi. (966 km) radius: Local sourcing (within 100 miles) is relevant forOption 1: Local Production, not FSC certification.Reference: LEED Reference Guide for Homes Design and Construction, v4, MR Credit: Environmentally Preferable Products, p. 160.
D). No points are earned because certified lumber is a prerequisite: Certified lumber is not a prerequisite; MR Prerequisite: Certified Tropical Woodapplies only to tropical wood, not all lumber.Reference: LEED Reference Guide for Homes Design and Construction, v4, MR Prerequisite: Certified Tropical Wood, p. 156.
TheLEED AP Homes Candidate Handbookemphasizes MR credits, including certified lumber, and references theLEED Reference Guide for Homes Design and Constructionas a key resource. The exam is based onLEED v4, ensuring the relevance of FSC certification thresholds.
References:
LEED Reference Guide for Homes Design and Construction, v4, USGBC, Materials and Resources Credit: Environmentally Preferable Products, p. 160-161.
LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.
usgbc.org/credits).
LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).
USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org
/resources/leed-homes-design-and-construction-v4).
LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming certified lumber criteria.
NEW QUESTION # 56
Energy losses due to supply duct leakage are most likely to occur when:
- A. Ducts are located in unconditioned attics, basements, or exterior walls.
- B. Duct layout includes multiple 90-degree bends on a single branch.
- C. Ducts are located within conditioned envelope but joints are unsealed.
- D. Interior wall cavities are used to conduct return air.
Answer: A
Explanation:
Duct leakage in HVAC systems can significantly increase energy losses, particularly when ducts are poorly sealed or located in areas that exacerbate the impact of leakage. This issue is addressed in theLEED for Homes Rating System (v4)under theEnergy and Atmosphere (EA)category, specifically in credits related to Heating and Cooling Distribution Systems.
According to theLEED Reference Guide for Homes Design and Construction (v4), the location of ducts plays a critical role in energy losses due to leakage:
EA Credit: Heating and Cooling Distribution Systems
To minimize energy losses, locate all heating and cooling ducts and air handlers within the conditioned envelope of the building. Ducts located in unconditioned spaces, such as attics, basements, or exterior walls, are more likely to lose energy due to leakage, as air escaping from ducts in these areas is lost to the outside or unconditioned zones, increasing heating and cooling loads.
Source: LEED Reference Guide for Homes Design and Construction, v4, Energy and Atmosphere Credit:
Heating and Cooling Distribution Systems, p. 126.
TheLEED v4.1 Residential BD+Crating system further clarifies this:
EA Credit: Optimize Energy Performance
Ducts located in unconditioned spaces (e.g., attics, unconditioned basements, or exterior walls) contribute to significant energy losses when leakage occurs, as conditioned air escapes to areas outside the thermal envelope. Sealing ducts and locating them within conditioned spaces are best practices to minimize losses.
Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online.
Ducts inunconditioned attics, basements, or exterior wallsare particularly problematic because any leakage results in conditioned air being lost to spaces that are not temperature-controlled, requiring the HVAC system to work harder to maintain indoor comfort. This scenario maximizes energy losses compared to ducts within the conditioned envelope.
Why not the other options?
Reference: LEED Reference Guide for Homes Design and Construction, v4, EA Credit: Heating and Cooling Distribution Systems, p. 127, which discusses return air strategies but not as a primary leakage concern.
B). Duct layout includes multiple 90-degree bends on a single branch: Multiple 90-degree bends increase airflow resistance, reducing system efficiency, but they do not directly cause duct leakage. Leakage is related to unsealed joints or poor duct construction, not the geometry of the duct layout.Reference: LEED Reference Guide for Homes Design and Construction, v4, EA Credit: Heating and Cooling Distribution Systems, p. 126, which prioritizes duct sealing over layout.
C). Ducts are located within conditioned envelope but joints are unsealed: While unsealed joints cause leakage, ducts within the conditioned envelope leak into spaces that are already temperature-controlled. This reduces the energy impact compared to leakage in unconditioned spaces, as the conditioned air remains within the thermal envelope.Reference: LEED Reference Guide for Homes Design and Construction, v4, EA Credit:
Heating and Cooling Distribution Systems, p. 126, which notes that ducts in conditioned spaces minimize energy loss from leakage.
TheLEED AP Homes Candidate Handbookconfirms that the exam tests knowledge of EA credits, including duct system design and energy performance, referencing theLEED Reference Guide for Homes Design and Constructionas a primary resource. The handbook ensures that the exam is based onLEED v4, aligning with the focus on duct location and sealing.
References:
LEED Reference Guide for Homes Design and Construction, v4, USGBC, Energy and Atmosphere Credit: Heating and Cooling Distribution Systems, p. 126-127.
LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.
usgbc.org/credits).
LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).
USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org
/resources/leed-homes-design-and-construction-v4).
LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming duct location impacts.
NEW QUESTION # 57
A shower stall was installed adjacent to an exterior wall prior to insulation installation. What is the impact to LEED for Homes certification?
- A. The home cannot be LEED certified until the walls are insulated in compliance with the Thermal Enclosure Checklist
- B. The overall R-value of the home's insulation must be increased to compensate for the deficit
- C. The prescriptive path for Energy and Atmosphere cannot be used
- D. The home energy model must include this feature so the HERS index score reflects it
Answer: A
Explanation:
TheLEED for Homes Rating System (v4)includes theEnergy and Atmosphere (EA) Prerequisite:
Minimum Energy Performance, which requires compliance with theThermal Enclosure System Checklist to ensure proper insulation and airtightness for energy efficiency.
According to theLEED Reference Guide for Homes Design and Construction (v4):
EA Prerequisite: Minimum Energy Performance
The project must comply with the Thermal Enclosure System Checklist, which requires that all exterior walls be fully insulated to meet or exceed specified R-values before other components (e.g., shower stalls) are installed. Insulation must be installed behind shower stalls or other fixtures adjacent to exterior walls to prevent thermal bridging and ensure compliance. Non-compliance with the checklist prevents certification until corrected.
Source: LEED Reference Guide for Homes Design and Construction, v4, Energy and Atmosphere Prerequisite: Minimum Energy Performance, p. 112.
TheLEED v4.1 Residential BD+Crating system confirms:
EA Prerequisite: Energy Performance
All exterior walls must be insulated in accordance with the Thermal Enclosure System Checklist. If components like shower stalls are installed before insulation, the home cannot be certified until the walls are properly insulated to meet the checklist requirements.
Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online.
The correct answer isthe home cannot be LEED certified until the walls are insulated in compliance with the Thermal Enclosure Checklist(Option D), as installing a shower stall before insulation violates the prerequisite's requirement for proper insulation installation.
Why not the other options?
Reference: LEED Reference Guide for Homes Design and Construction, v4, EA Prerequisite: Minimum Energy Performance, p. 112.
B). The home energy model must include this feature so the HERS index score reflects it: The HERS model assumes proper insulation; the issue is a construction error, not a modeling requirement.Reference:
LEED Reference Guide for Homes Design and Construction, v4, EA Prerequisite: Minimum Energy Performance, p. 112.
C). The overall R-value of the home's insulation must be increased to compensate for the deficit:
Increasing R-value elsewhere does not address the specific checklist requirement for insulation behind the shower stall.Reference: LEED Reference Guide for Homes Design and Construction, v4, EA Prerequisite:
Minimum Energy Performance, p. 112.
TheLEED AP Homes Candidate Handbookemphasizes EA prerequisites, including the Thermal Enclosure Checklist, and references theLEED Reference Guide for Homes Design and Constructionas a key resource. The exam is based onLEED v4, ensuring the relevance of insulation compliance.
References:
LEED Reference Guide for Homes Design and Construction, v4, USGBC, Energy and Atmosphere Prerequisite: Minimum Energy Performance, p. 112.
LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.
usgbc.org/credits).
LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).
USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org
/resources/leed-homes-design-and-construction-v4).
LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming insulation checklist requirements.
NEW QUESTION # 58
How is credit earned under Regional Priority Credit, Regional Priority when the credit has multiple thresholds?
- A. Points are awarded when the maximum threshold has been exceeded
- B. Points are awarded at particular levels of achievement
- C. Points are awarded at the maximum threshold
- D. Points are awarded at the minimum threshold
Answer: A
Explanation:
TheLEED for Homes Rating System (v4)includesRegional Priority (RP) Credits, which provide bonus points for achieving existing credits identified as environmentally significant for a project's region. For credits with multiple thresholds, exemplary performance can earn additional points.
According to theLEED Reference Guide for Homes Design and Construction (v4):
Regional Priority Credits (1-4 points)
Regional Priority Credits are awarded for achieving designated credits that address location-specific environmental priorities. For credits with multiple thresholds (e.g., Water Efficiency Credit: Outdoor Water Use), an additional bonus point is awarded when the maximum threshold has been exceeded, demonstrating exemplary performance.
Source: LEED Reference Guide for Homes Design and Construction, v4, Regional Priority Credits, p. 190; Innovation Credit: Innovation, p. 190.
TheLEED v4.1 Residential BD+Crating system confirms:
Regional Priority Credits
When an RP credit has multiple thresholds, a project earns the bonus point by meeting the base credit requirements, and an additional point may be earned for exemplary performance by exceeding the maximum threshold of the underlying credit.
Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online.
The correct answer ispoints are awarded when the maximum threshold has been exceeded(Option C), as RP credits with multiple thresholds award bonus points for exemplary performance beyond the highest threshold.
Why not the other options?
* A. Points are awarded at the minimum threshold: RP credits require achieving the base credit, not just the minimum threshold.
* B. Points are awarded at the maximum threshold: Points are awarded for exceeding the maximum threshold, not just meeting it.
Reference: LEED Reference Guide for Homes Design and Construction, v4, Regional Priority Credits, p. 190.
TheLEED AP Homes Candidate Handbookemphasizes RP credits and exemplary performance, referencing theLEED Reference Guide for Homes Design and Constructionas a key resource. The exam is based on LEED v4, ensuring the relevance of exceeding thresholds.
References:
LEED Reference Guide for Homes Design and Construction, v4, USGBC, Regional Priority Credits, p.
190; Innovation Credit: Innovation, p. 190.
LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.
usgbc.org/credits).
LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).
USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org
/resources/leed-homes-design-and-construction-v4).
LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming exemplary performance criteria.
NEW QUESTION # 59
In order for a project to earn Innovation Credit, LEED AP for Homes, the LEED AP for Homes must be a principal member of the:
- A. Project team and possess the credential prior to project registration
- B. Project team and possess the credential prior to preliminary rating
- C. Verification team and possess the credential prior to project registration
- D. Verification team and possess the credential prior to preliminary rating
Answer: A
Explanation:
TheLEED for Homes Rating System (v4)includes theInnovation (IN) Credit: LEED Accredited Professional, which awards a point for having a LEED AP for Homes as a principal member of the project team to guide sustainable design and certification.
According to theLEED Reference Guide for Homes Design and Construction (v4):
IN Credit: LEED Accredited Professional (1 point)
At least one principal participant of the project team must be a LEED AP for Homes and hold the credential prior to project registration. The LEED AP must be actively involved in the project to ensure effective implementation of LEED strategies.
Source: LEED Reference Guide for Homes Design and Construction, v4, Innovation Credit: LEED Accredited Professional, p. 189.
TheLEED v4.1 Residential BD+Crating system confirms:
IN Credit: LEED Accredited Professional
The LEED AP for Homes must be a principal member of the project team (not the verification team) and possess the credential before project registration to earn the credit.
Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online.
The correct answer isproject team and possess the credential prior to project registration(Option B), as this meets the credit's requirements for the LEED AP's role and timing.
Why not the other options?
* A. Project team and possess the credential prior to preliminary rating: The credential must be held before project registration, not preliminary rating.
* C. Verification team and possess the credential prior to preliminary rating: The LEED AP must be on the project team, not the verification team.
Reference: LEED Reference Guide for Homes Design and Construction, v4, IN Credit: LEED Accredited Professional, p. 189.
TheLEED AP Homes Candidate Handbookemphasizes IN credits, including the LEED AP role, and references theLEED Reference Guide for Homes Design and Constructionas a key resource. The exam is based onLEED v4, ensuring the relevance of the project team requirement.
References:
LEED Reference Guide for Homes Design and Construction, v4, USGBC, Innovation Credit: LEED Accredited Professional, p. 189.
LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.
usgbc.org/credits).
LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).
USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org
/resources/leed-homes-design-and-construction-v4).
LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming LEED AP requirements.
NEW QUESTION # 60
......
Real LEED-AP-Homes Quesions Pass Certification Exams Easily: https://www.testsimulate.com/LEED-AP-Homes-study-materials.html