[UPDATED 2023] Cisco 300-615 Questions Prepare with Free Demo of PDF

NEW 2023 Certification Sample Questions 300-615 Dumps & Practice Exam

Cisco 300-615 exam is ideal for network administrators, network engineers, and data center administrators who want to validate their troubleshooting skills and gain recognition as specialists in data center operations. Troubleshooting Cisco Data Center Infrastructure certification exam is also suitable for professionals who want to enhance their career prospects in the field of data center infrastructure and network troubleshooting.

Difficulty in writing 300-615 Exam

Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure is the most powerful certification that candidates can have on their resume. But for this, they will have to pass 300-615 questions. Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Exam is a challenging exam to pass this exam candidates will have to work hard with the help of right focus and preparation material passing this exam is an achievable goal.TestSimulate help candidates by providing the most relevant and updated 300-615 exam dumps. Furthermore, We also provide the 300-615 practice test that will be much beneficial in the preparation. TestSimulate aims to provide the best 300-615 exam dumps that is verified by the Cisco experts. If candidates feel any doubt in the 300-615 practice exams then our team is always there to help them. 300-615 exam dumps are the perfect way to prepare 300-615 exam with good grades in the just first attempt. So, candidates want instant success in the 300-615 exam with quality 300-615 training material then TestSimulate is the best option for them because our management is well trained in it and we update each question of all exams on a regular basis after consulting recent updates with our Cisco certified professionals.

 

NEW QUESTION # 92
An engineer is troubleshooting issues in Cisco UCS Director. Drag and drop the possible causes from the left onto the correct issues on the right.

Answer:

Explanation:

NEW QUESTION # 93
Refer to the exhibit.

The initiator that has FC ID 0x970102 fails to communicate with the target that has FC ID 0x970200. What action resolves the issue?

• A. Reset the port for FC ID 0x970102 and FC ID 0x970200 to log in to the fabric.
• B. Reset the port for FC ID 0x970209 and FC ID 0x9700c2 to log in to the fabric.
• C. Reactivate the zoneset.
• D. Reconfigure the initiator and the target to be in the same zones.

Answer: C

NEW QUESTION # 94
An IOM fails during a firmware upgrade and is unresponsive. Which action recovers the module?

• A. From the peer IOM, reset the faulty module.
• B. Roll back to the previous firmware.
• C. Use AutoInstall to reinstall the firmware.
• D. Restore UCSM configuration from backup.

Answer: B

Explanation:
Section: Management and Operations
Explanation/Reference:

NEW QUESTION # 95
Refer to the exhibit.

Refer to the exhibit. During a maintenance window of the Nexus switch pair, one of the Cisco Nexus chassis was brought offline for maintenance. The primary Cisco Nexus switch was stable during the maintenance window. After finishing the tasks on the chassis, the administrator wanted to bring the second switch online. The administrator checked the status of the disconnected switch that was removed from the vPC during the maintenance. The engineer must connect the peer chassis seamlessly with the primary vPC peer without experiencing traffic interruption. Which action accomplishes this goal?

• A. Change the auto recovery to disabled, and enable auto recovery.
• B. Change the role priority, then connect the peer switch.
• C. Change the auto recovery timer to active if not already set, then re-establish the connectivity.
• D. Change the auto timer to a higher value, then connect the peer switch.

Answer: D

NEW QUESTION # 96
An engineer is troubleshooting issues in Cisco UCS Director. Drag and drop the possible causes from the left onto the correct issues on the right.

Answer:

Explanation:

NEW QUESTION # 97
Refer to the exhibit.

When an engineer inserts 8-Gb FC SFP port 15 on a Cisco UCS Fabric Interconnect, the port fails. What is a possible cause of the issue?

• A. Port 15 is configured for 4-Gb FC.
• B. Port 15 is missing a license.
• C. The polarity of the fiber cable is reversed.
• D. Port 15 is configured as an Ethernet port.

Answer: D

NEW QUESTION # 98

Refer to the exhibit. A network engineer traces the packet flow from the Veth991 of a blade server toward the core switch. The switch reports performance issues. What is the role of the interface Eth1/7?

• A. IOM host interface
• B. fabric interconnect uplink interface
• C. server interface
• D. IOM network interface

Answer: B

Explanation:
Section: Compute Platforms

NEW QUESTION # 99
Refer to the exhibit.

The HSRP configuration in the exhibit fails to function. Which action resolves this issue?

• A. Set the MTU to 1500 bytes.
• B. Configure the same HSRP group on both devices.
• C. Enable IP redirects.
• D. Configure HSRP version 2.

Answer: D

NEW QUESTION # 100
A request to activate the port security database is rejected. Which action do you perform to investigate the cause of the issue?

• A. Find conflicting entries between the active and configuration databases.
• B. Use the force option to identify rejected devices.
• C. Enable the auto-learning feature.
• D. Verify that devices are fully attached to the active database.

Answer: B

Explanation:
Section: Management and Operations

NEW QUESTION # 101
Refer to the exhibit.

The EEM script fails to send an SNMP trap when a user attempts to enter configuration mode. Which configuration is missing from the script?

• A. IP address of the SNMP server
• B. event-default action statement
• C. policy-default action statement
• D. event statement

Answer: A

NEW QUESTION # 102
One of Cisco Nexus Series interfaces has become errdisabled with the error message "DCX-No ACK in 100 PDUs". What is the cause of this error?

• A. The host has not responded to the Control Sub-TLV DCBX exchanges of the switch.
• B. Cisco Discovery Protocol is disabled on the switch.
• C. The acknowledgement number in the server response has not incremented for 100 exchanges.
• D. LLDP is disabled on the switch.

Answer: A

NEW QUESTION # 103
Refer to the exhibit.

A PC belongs to VLAN 68 The user experiences a large amount of packet loss when communicating with hosts that are outside of VLAN 68. Which action resolves the problem?

• A. Remove the HSRP configuration
• B. Configure ip arp synchronization on both switches.
• C. Enable the peer-gateway feature
• D. Replace HSRP with GLBP

Answer: C

Explanation:
Explanation
I assume that the PC is sending traffic with destination MAC of Nexus physical interfaces. If more snap shots about this question are available, please share.

NEW QUESTION # 104
Refer to the exhibit.

An engineer is troubleshooting why user1, user2, and user3 from group STORAGE- ADMINISTRATOR in Microsoft Active Directory cannot log in to the Cisco MDS SSH CLI. Which action resolves the issue?

• A. Configure the role name to match the group name on Microsoft Active Directory.
• B. Integrate Cisco MDS with Microsoft Active Directory.
• C. Include specific users into MDS role configuration.
• D. Configure SSH logins on Cisco MDS switch.

Answer: A

NEW QUESTION # 105
Cisco Unified Computing System Manager raises a critical error message that indicates that the system has overlapping Ethernet and FCoE VLANs. All of the Ethernet traffic on the overlapping VLANs drops. Which action resolves the issue?

• A. Set the FCoE VLAN as the native VLAN on server uplinks.
• B. Modify the VLAN assignment to vNICs.
• C. Change the PIN groups on the vHBAs.
• D. Modify the FCoE VLAN.

Answer: D

NEW QUESTION # 106
Refer to the exhibit.

The EEM script overrides all events in the system policy. What should be added to the script to resolve the issue?

• A. event-default action statement
• B. event statement
• C. environment variable
• D. configure terminal action

Answer: B

NEW QUESTION # 107
......

Cisco 300-615 exam is a computer-based test that consists of multiple-choice questions. The test duration is 90 minutes, and the candidates are required to answer 60-70 questions. 300-615 exam is available in English and Japanese languages. The test is conducted by Pearson VUE, and the registration fee for the exam is $300.

 

300-615 Deluxe Study Guide with Online Test Engine: https://www.testsimulate.com/300-615-study-materials.html