Updated Feb-2023 Test Engine to Practice Test for MTCNA Exam Questions and Answers!
MikroTik Certified Network Associate Exam Certification Sample Questions and Practice Exam
NEW QUESTION 16
Where is a hub specified in the OSI model?
- A. Application layer
- B. Physical layer
- C. Data Link layer
- D. Session layer
Answer: B
NEW QUESTION 17
Using wireless connect-list it's possible to prioritize connection to one Access Point over another Access Point by changing the order of the entries.
- A. True
- B. False
Answer: B
NEW QUESTION 18
Which are necessary sections in /queue simple to set bandwidth limitation?
- A. max-limit
- B. target-address, dst-address, max-limit
- C. target-address, max-limit
- D. target-address, dst-address
Answer: C
NEW QUESTION 19
You have a DHCP server on your MikroTik router. The IP addresses 10.1.2.2-10.2.2.20 are distributed in the DHCP network. Additionally, 3 static IP address are defined for your servers: 10.1.2.31-10.1.2.33.
After a while 20 more IP addresses need to be distributed in the network. It is possible to distribute the extra IP address without adding another DHCP Server:
- A. True
- B. False
Answer: B
NEW QUESTION 20
Which WLAN IEEE specification allows up to 54Mbps at 2.4GHz?
- A. B
- B. N
- C. A
- D. G
Answer: D
NEW QUESTION 21
Which of the following are layers in the TCP/IP model?
Application
Session
Transport
Internet
Data Link
Physical
- A. 1, 3 and 4
- B. 3, 4 and 5
- C. 1 and 2
- D. 2, 3 and 5
Answer: A
NEW QUESTION 22
Which command is used to upgrade an IOS on a Cisco router?
- A. copy tftp start
- B. config net
- C. copy tftp run
- D. copy tftp flash
Answer: D
NEW QUESTION 23
What configuration is added by /ip Hot-Spot setup command? (select all that apply)
- A. /queue tree
- B. /ip dhcp-server
- C. /ip Hot-Spot user
- D. /ip service
- E. /ip Hot-Spot walled-garden
Answer: B,C
NEW QUESTION 24
What layer in the TCP/IP stack is equivalent to the Transport layer of the OSI model?
- A. Host-to-Host
- B. Network Access
- C. Internet
- D. Application
Answer: A
NEW QUESTION 25
Select minimal set of software packages in RouteOS required to configuring a wireless AP
- A. System
- B. advanced-tools
- C. Wireless
- D. dhcp
- E. routing
Answer: A,C
NEW QUESTION 26
For static routing functionality, additionally to the RouterOS 'system' package, you will also need the following software package:
- A. advanced-tools
- B. dhcp
- C. routing
- D. no extra package required
Answer: D
NEW QUESTION 27
How long is level 1 (demo) license valid?
- A. 24 hours
- B. 1 month
- C. 1 year
- D. Infinite time
Answer: A
NEW QUESTION 28
Which of the following protocols / port s are used for SNMP. (Simple Network Managemnt Protocol)
- A. TCP 162
- B. TCP 161
- C. UDP 162
- D. TCP 123
- E. TCP 25
- F. UDP 161
Answer: C,F
NEW QUESTION 29
What does a VLAN do?
- A. Provides multiple collision domains on one switch port.
- B. Acts as the fastest port to all servers.
- C. Provides multiple broadcast domains within a single collision domain.
- D. Breaks up broadcast domains in a layer 2 switch internetwork.
Answer: D
NEW QUESTION 30
Which of the following are valid IP addresses?
- A. 192.168.256.1
- B. 192.168.13.255
- C. 10.10.14.0
- D. 1.27.14.254
Answer: B,C,D
NEW QUESTION 31
Netinstall can be used to
- A. Reinstall software without losing licence
- B. Keep configuration, but reset a lost admin password
- C. Install package for different hardware architecture
- D. Install different software version (upgrade or downgrade)
Answer: A,B,D
NEW QUESTION 32
What protocols are used to configure trunking on a switch?
VLAN Trunking Protocol
VLAN
802.1Q
ISL
- A. 3 and 4
- B. 1 only
- C. 2 only
- D. 1 and 2
Answer: A
NEW QUESTION 33
The DoD model (also called the TCP/IP stack) has four layers. Which layer of the DoD model is equivalent to the Network layer of the OSI model?
- A. Network Access
- B. Internet
- C. Application
- D. Host-to-Host
Answer: B
NEW QUESTION 34
What is the minimal possible wireless configuration to create an Access Point?
- A. scan-list
- B. radio name
- C. mode
- D. band
- E. DFS mode
- F. frequency
- G. WDS
- H. ssid
Answer: C
NEW QUESTION 35
A client uses a RouterBOARD1000. The clock is configured in '/system clock'. The clock resets to default after each reboot.
Select the best solution for the problem.
- A. Configure '/system ntp client' and set a valid and reachable NTP server address.
- B. Configure '/system ntp server' and set a valid and reachable NTP client address.
- C. Open the router and ensure the CMOS battery is fine.
- D. Write a script in '/system script' to set the clock
Answer: A
NEW QUESTION 36
......
Certification dumps MTCNA - MikroTik Training MTCNA guides - 100% valid: https://www.testsimulate.com/MTCNA-study-materials.html