MikroTik Certified Network Associate Exam (MTCNA) Free Practice Test

Question 1

If a packet comes to a router and starts a new, previously unseen connection, which connection state would be applied to it?

A. new

B. invalid

C. unknown

D. no connection state would be applied to such packet

E. established

Correct Answer: A

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 2

It is required to make a web server on a private LAN visible on the public internet. Only the web server port should be visible to the public. Which of the following configuration steps must be met? (Select all that apply)

A. Public IP address of the web server must be installed on the NAT Router

B. In IP firewall NAT, there should be a dst-nat between the public IP of the router and the private IP of the web server

C. Connection Tracking must be enabled on NAT router

D. A route between the NAT router and the web server must exist

E. LAN address of the web server should be routable on the internet

Correct Answer: B,C,D

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 3

Which protocol does DHCP use at the Transport layer?

A. ARP

B. IP

C. TCP

D. UDP

Correct Answer: D

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 4

What is possible with Netinstall?

A. MikroTik RouterOS reinstall

B. MikroTik RouterOS configuration reset

C. MikroTik RouterOS password reset with saving router's configuration

Correct Answer: A

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 5

What command will display the line, protocol, DLCI, and LMI information of an interface?

A. show interface

B. show run

C. show frame-relay pvc

D. sh pvc

Correct Answer: C

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 6

What menus should be used to allow certain websites to be accessed from behind a Hot-Spot interface, without client authentication?

A. ip Hot-Spot walled-garden

B. ip Hot-Spot ip-binding

C. ip Hot-Spot profile

D. ip Hot-Spot walled-garden ip

Correct Answer: A,D

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 7

The highest queue priority is:

A. 8

B. 256

C. 1

D. 16

Correct Answer: C

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 8

Select which of the following are 'Public IP addresses':

A. 11.63.72.21

B. 172.168.254.2

C. 192.168.0.1

D. 10.110.50.37

E. 172.28.73.21

Correct Answer: A

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 9

To use masquerade, you need to specify:

A. action=masquerade, out-interface, chain=dst-nat

B. action=masquerade, in-interface, chain=src-nat

C. action=masquerade, out-interface, chain=src-nat

D. action=accept, out-interface, chain=src-nat

Correct Answer: C

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 10

What is necessary for PPPoE client configuration?

A. Interface (on which PPPoE client is going to work)

B. ip firewall nat masquerade rule

C. Static IP address on PPPoE client interface

Correct Answer: A,B

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 11

When adding a static route, you must always ensure that you add both the gateway and the interface.

A. False

B. True

Correct Answer: A

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 12

What protocol is used for Ping and Trace route?

A. ICMP - ping

B. IP

C. UDP - trace route

D. DHCP

E. TCP

Correct Answer: A,C

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 13

[VLAN Management - VTP and Cisco Switching] Which one of the following is true regarding VLANs?

A. VTP is used to send VLAN information to switches in a configured VTP domain.

B. VLANs only work if you have a complete Cisco switched internetwork. No off-brand switches are allowed.

C. You should not have more than 10 switches in the same VTP domain.

D. Two VLANs are configured by default on all Cisco switches.

Correct Answer: A

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Welcome to TestSimulate

MikroTik Certified Network Associate (MTCNA) Free Practice Test