Pass Cisco 300-630 Exam Info and Free Practice Test
New 2022 Latest Questions 300-630 Dumps - Use Updated Cisco Exam
NEW QUESTION 24
What is the purpose of the Forwarding Tag (FTAG) in Cisco ACI?
- A. FTAG trees in Cisco ACI are used to load balance unicast traffic.
- B. FTAG is used in Cisco ACI to add a label to the iVXLAN traffic in the fabric to apply the correct policy.
- C. FTAG trees in Cisco ACI are used to load balance mutli-destination traffic.
- D. FTAG is used in Cisco ACI to add a label to the VXLAN traffic in the fabric to apply the correct policy.
Answer: C
Explanation:
Section: ACI Packet Forwarding
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/aci-fundamentals/ b_ACI-Fundamentals/b_ACI- Fundamentals_chapter_010010.html#concept_1E8BF286E1C043EF839D80935FDF9F50
NEW QUESTION 25
What is the purpose of the Forwarding Tag (FTAG) in Cisco ACI?
- A. FTAG trees in Cisco ACI are used to load balance unicast traffic.
- B. FTAG is used in Cisco ACI to add a label to the iVXLAN traffic in the fabric to apply the correct policy.
- C. FTAG trees in Cisco ACI are used to load balance mutli-destination traffic.
- D. FTAG is used in Cisco ACI to add a label to the VXLAN traffic in the fabric to apply the correct policy.
Answer: C
NEW QUESTION 26
Refer to the exhibit.
An engineer must have communication between EPG1 in VRF1 and External EPG in VRF2. Which three actions should be taken for the defined subnets in the L3Out External EPG to accomplish this goal? (Choose three.)
- A. Enable Shared Security Import Subnet
- B. Enable Export Route Control Subnet
- C. Enable Import Route Control Subnet
- D. Enable Aggregate Shared Routes
- E. Enable Shared Route Control Subnet
- F. Enable External Subnets for External EPG
Answer: A,B,C
NEW QUESTION 27
Drag and drop the tenant implementation designs from the left onto the outcomes of the design when a greenfield Cisco ACI fabric is deployed on the right.
Answer:
Explanation:
NEW QUESTION 28
An engineer configures a new Cisco ACI Multi-Pod and must set up the link between the spine and the IPN device. Which three actions should be taken to accomplish this goal? (Choose three.)
- A. Enable DHCP relay
- B. Enable BIDIR-PIM protocol
- C. Enable IS-IS routing
- D. Enable PIM-SM protocol
- E. Enable OSPF routing
- F. Enable MP-BGP routing
Answer: A,B,F
NEW QUESTION 29 
Refer to the exhibit. Which two configurations enable inter-VRF communication? (Choose two.)
- A. Change the subject scope to VRF
- B. Enable Advertise Externally under the subnet scope
- C. Export the contract and import as a contract interface
- D. Set the subnet scope to Shared Between VRFs
- E. Change the contract scope to Tenant
Answer: B,C
Explanation:
Section: Advanced ACI Policies and Integrations
NEW QUESTION 30
Refer to the exhibit.
A customer experiences resource overconsumption on one of its border leaf switches. Which action should be taken to reduce the consumption on this switch?
- A. Disable Remote EP Learning
- B. Disable VRF Policy Control Enforcement
- C. Disable IP Data Plane Learning
- D. Migrate L3Outs to another switch
Answer: C
NEW QUESTION 31
A network engineer configured an active-active firewall cluster that is stretched across separate pods in the Cisco ACI fabric. Which two implementation setups for anycast services are available? (Choose two.)
- A. Configure the firewalls behind an EPG subnet
- B. Deploy a Layer 4 to Layer 7 service graph with PBR
- C. Modify the Cisco ACI contract scope
- D. Modify the MAC address on the second firewall
- E. Deselect No Default SVI Gateway under EPG Subnet
Answer: A,D
NEW QUESTION 32
A customer is deploying a new application across two ACI pods that is sensitive to latency and jitter. The application sets the DSCP values of packets to AF31 and CS6, respectively. Which configuration changes must be made on the APIC to support the new application and prevent packets from being delayed or dropped between pods?
- A. align the custom QoS policy on the EPG site in the customer tenant
- B. disable DSCP translation policy
- C. disable DSCP mapping on the IPN devices
- D. align the ACI QoS levels and IPN QoS policies
Answer: A
NEW QUESTION 33 
Refer to the exhibit. Which configuration mode must be selected for the VMM vSwitch Port Channel policy to avoid MAC flapping on the Cisco UCS Fls and Cisco ACI leaf switches?
- A. Static Channel - Mode On
- B. LACP Active
- C. LACP Passive
- D. MAC Pinning
Answer: D
Explanation:
Section: Advanced ACI Policies and Integrations
NEW QUESTION 34
What is a characteristic of a stretched bridge domain solution between Cisco ACI sites with Layer 2 flood disabled?
- A. The application profile that is associated to the bridge domain have local significance in each site.
- B. Headend replication is used for BUM traffic between sites.
- C. IP mobility is ensured between sites for disaster recovery.
- D. The tenant and VRF that associated to the bridge domain have local significance in each site.
Answer: D
NEW QUESTION 35 
Refer to the exhibit. Which three actions should be taken to implement the vPC in the Cisco ACI fabric?
(Choose three.)
- A. Select individual interface profiles
- B. Select a common vPC interface policy group
- C. Select individual switch profiles
- D. Select common switch profiles
- E. Select common interface profiles
Answer: A,B,D
Explanation:
Section: Advanced ACI Policies and Integrations
NEW QUESTION 36
Refer to the exhibit.
What must be configured in the service graph to redirect HTTP traffic between the EPG client and EPG server to go through the Cisco ASA firewall?
- A. contract filter to allow ARP and HTTP
- B. precise filter to allow only HTTP traffic
- C. contract with no filter
- D. permit-all contract filter
Answer: A
NEW QUESTION 37
Which feature should be disabled on a bridge domain when a default gateway for endpoints is on an external device instead of a Cisco ACI bridge domain SVI?
- A. unicast routing
- B. ARP flooding
- C. unknown unicast flooding
- D. proxy ARP
Answer: C
NEW QUESTION 38 
Refer to the exhibit. Which configuration must be implemented on L3Out EBGP to advertise out of the fabric
172.16.2.0/24 network that is learned from L3Out OSPF?
- A.
- B.
- C.
- D.
Answer: B
Explanation:
Section: Advanced ACI Policies and Integrations
NEW QUESTION 39 
Refer to the exhibit. A network engineer configures a Layer 4 to Layer 7 device for an outside routed firewall that is connected to POD-1 inside a Cisco ACI fabric that consists of two pods. All traffic from POD-1 or POD-2 that uses the L3Out should pass through the routed firewall. Which Function Type must be implemented in the service graph for POD-2 to use L3Out?
- A. L1
- B. GoThrough
- C. GoTo
- D. L2
Answer: D
Explanation:
Section: Multipod
NEW QUESTION 40
An engineer configures a new Cisco ACI Multi-Site Orchestrator node to join an MSO cluster. Which two components are necessary to ensure that the new node has IP connectivity in this configuration? (Choose two.)
- A. OOB interface of ISN
- B. Cisco ACI spine interfaces that are connected to ISN
- C. Cisco APICs over the OOB management network
- D. management IP of ESXi hosts where the controllers are deployed
- E. existing Cisco ACI Multi-Site Orchestrator node
Answer: C,E
NEW QUESTION 41
As part of a newly deployed ACI fabric, a pair of border leaf switches have been deployed to provide shared services for all tenants. The configured L3Out runs OSPF as the routing protocol. The requirement is to advertise the routes from the border leaf switches to the compute leaf switches. Which configuration must be implemented to meet these requirements?
- A. Configure a BGP route reflector policy for the Cisco ACI pod
- B. Define the shared L3Out in the common tenant
- C. Define the consumer subnet under the consumer EPG
- D. Enable Import Route Control Enforcement in the L3Out policy
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/ guide-c07-743150.html
NEW QUESTION 42
......
Latest 300-630 Exam Dumps Cisco Exam: https://www.testsimulate.com/300-630-study-materials.html