82 Exam Questions for C_IBP_2105 Updated Versions With Test Engine
Pass C_IBP_2105 Exam with Updated C_IBP_2105 Exam Dumps PDF 2021
NEW QUESTION 23
You define fixing for a key figure. Which of the following functions are available for this key figure? Note:
There are 2 correct Answers to this question.
- A. Fixing is possible for system editable key figures.
- B. Fixing is possible for a certain quantity of a key figure value.
- C. Fixing is possible for manually editable key figures.
- D. Fixing is possible for a certain period, including all child values in the hierarchy.
Answer: C,D
NEW QUESTION 24
You create a planning filter using an SAP IBP Fiori app. Which of the following objects can it be applied to? Note: There are 2 correct Answers to this question.
- A. Planning view templates in the SAP IBP add-in for Microsoft Excel
- B. Snapshot operator in the SAP IBP add-in for Microsoft Excel
- C. Jobs in the Applications Jobs app
- D. Supply chain graph in Supply Chain Network app
Answer: A,C
NEW QUESTION 25
You are modeling the introduction of a new product using Lifecycle Planning functionality in SAP IBP.
What is mandatory to create in your planning area for the setup of reference product(s) to work? Note:
There are 2 correct Answers to this question.
- A. Definition of an attribute representing the product ID
- B. Definition of an attribute representing the product description
- C. Planning objects for the new product
- D. Definition of Actual Sales business meaning for one key figure
Answer: A,C
NEW QUESTION 26
Which of the following can be used as inputs for inventory level optimization? Note: There are 2 correct Answers to this question.
- A. Target inventory level
- B. Lead time variability
- C. Lot sizes
- D. Reorder point
Answer: B,C
NEW QUESTION 27
Which SAP IBP planning operator can be run to delete planning objects in a certain version?
- A. Purge Key Figure Data Outside Planning Area Planning Horizon
- B. Purge Key Figure Data
- C. Purge Master Data
- D. Purge Non-Confirming Data
Answer: B
NEW QUESTION 28
Which of the following stages can be modeled using scenarios from the S&OP planning cycle? Note:
There are 2 correct Answers to this question.
- A. Demand review
- B. Demand sensing stage
- C. Demand-supply balancing
- D. Data input review for inventory
Answer: A,C
NEW QUESTION 29
Which of the following is one of the functions of multi-echelon inventory optimization?
- A. Ability to optimize delivery costs between different locations
- B. Ability to maintain high external service levels with low internal service levels
- C. Ability to optimize lead times between different locations
- D. Ability to maintain high external service levels with high internal service levels
Answer: B
NEW QUESTION 30
You created a key figure and want to add calculations. Which of the following rules do you consider?
Note: There are 2 correct Answers to this question.
- A. Aggregation calculations using SUM or MAX functions must be based on a higher aggregation level.
- B. All key figure calculations have calculation inputs, which can be marked as stored or calculated.
- C. The calculation chain for a key figure must always result in a calculated key figure.
- D. Key figures can be calculated across different planning levels.
Answer: B,D
NEW QUESTION 31
When can filter blocks appear in calculations? Note: There are 2 correct Answers to this question.
- A. When modeling attribute transformations
- B. When modeling cross-period calculations
- C. When using IFISNULL statements in the formula
- D. When modeling attribute as a key figure
Answer: A,B
NEW QUESTION 32
You are working to realign the data due to a recent warehouse closure. What should you be aware of in regards to configuration of realignment steps? Note: There are 2 correct Answers to this question.
- A. If a realignment step fails, subsequent steps are not processed.
- B. The realignment step status must be set to Approved for it to be executed.
- C. The name of the realignment step should be no longer than 20 characters.
- D. The number of steps in realignment run is limited to 255.
Answer: A,B
NEW QUESTION 33
Which of the following solutions are feasible when using the time series supply optimizer? Note: There are 3 correct Answers to this question.
- A. Not respecting production capacity
- B. Not-fully satisfied demands
- C. Not adhering to maximum transport values
- D. Violation of minimum resource utilization
- E. Violation of minimum aggregated inventory values
Answer: B,D,E
NEW QUESTION 34
When you promote calculated and approved inventory parameters from SAP IBP for inventory, what other IBP modules can be receiving them? Note: There are 2 correct Answers to this question.
- A. SAP IBP for sales and operations
- B. SAP IBP for demand
- C. SAP IBP for response and supply
- D. DDMRP
Answer: A,C
NEW QUESTION 35
Which of the following are functions of SAP IBP for demand? Note: There are 3 correct Answers to this question.
- A. Detailed statistical analysis of demand data using the supply chain algorithm library
- B. Demand sensing of demand data using predictive analytics tools
- C. Detailed statistical analysis of demand data using predictive analytics tools
- D. Demand sensing of demand data using the supply chain algorithm library
- E. Embedded, on-the-fly demand analytics
Answer: C,D,E
NEW QUESTION 36
Which calculations can be processed within the pre-processing step in the forecasting model? Note:
There are 2 correct Answers to this question.
- A. Promotion Sales Lift Ups can be deleted.
- B. Rounding can be executed for the sales history.
- C. Correlations can be evaluated.
- D. Missing Values can be substituted.
Answer: A,D
NEW QUESTION 37
Which features apply to quota violations modeled with the optimizer?
- A. Min and Max Quotas have to be the same as sourcing ratios.
- B. Quota violation cost is maintained as an attribute as a key figure.
- C. Quotas can be modeled for sourcing location, production, and consensus demand.
- D. Quotas require sourcing ratios to be maintained.
Answer: D
NEW QUESTION 38
You are configuring disaggregation for the KF1 key figure. Which methods can you apply? Note: There are 3 correct Answers to this question.
- A. Disaggregation according to an equal split
- B. Proportional disaggregation by using KF2 in the expression
- C. Disaggregation according to a user-defined expression
- D. Disaggregation in batch triggered by an application job
- E. An internal system-generated disaggregation
Answer: A,B,C
NEW QUESTION 39
You want to set up demand sensing to analyze demand changes in execution or close to execution windows. Which of the following conditions must you consider during the setup? Note: There are 2 correct Answers to this question.
- A. At setup test the system to run the demand sensing (full) algorithm weekly and the demand sensing (update) on a daily basis.
- B. Set up the forecast model to be executed at product-location level.
- C. It is mandatory to load historical lag-based snapshot data.
- D. The result generates sensed demand data at the monthly time granularity for the full time horizon.
Answer: A,C
NEW QUESTION 40
While modeling for a large machine with high capital needs, you need it to run cost effectively with minimum utilization, even if it means producing more than demand. Which solution would apply to this scenario? Note: There are 2 correct Answers to this question.
- A. Balance can be achieved between excessive prebuild and minimum utilization by incorporating violation costs.
- B. Enough demands can be pulled forward and pull production will occur.
- C. Capacity leveling will be possible for production and storage resources.
- D. Excess stock can be generated and will need to be staged in an overflow warehouse.
Answer: A,B
NEW QUESTION 41
You are working with the inventory optimization process and you want to use a what-if analysis. What parameters are assessed by this analysis? Note: There are 2 correct Answers to this question.
- A. Service levels
- B. Changed variability
- C. Capacity consumption
- D. Number of planning combinations
Answer: A,B
NEW QUESTION 42
Which property of an attribute will allow it to be used as an attribute as a key figure?
- A. Type INTEGER
- B. Type NAVCHAR
- C. Type TIMESTAMP
- D. Type DECIMAL
Answer: D
NEW QUESTION 43
How many different time levels can be selected within one planning view?
- A. All time levels available in the time profile
- B. Only time levels from the base planning level of selected key figures
- C. Only base time levels of the planning area
- D. All time levels available in the time profile, restricted by global configuration parameter
Answer: D
NEW QUESTION 44
Which of these conditions must be met to create a Local Member key figure?
- A. Use Excel Cell References in Report Editor is selected.
- B. A key figure is created in the Planning Area app.
- C. A key figure is selected in the Key Figures tab in the Microsoft Excel add-in.
- D. Activate Local Member Recognition is selected.
Answer: D
NEW QUESTION 45
What function would you use to configure a year-to-date calculation?
- A. Rolling Aggregation
- B. Dynamic Rolling Aggregation
- C. Cumulative Aggregation
- D. Last Period Aggregation
Answer: C
NEW QUESTION 46
Time profiles are made out of levels, which are in turn made out of periods. What are the ways SAP IBP identifies profiles and periods?
- A. Periods are identified by an integer and profiles by an alphanumeric prefix.
- B. Periods are identified by a start and end date and profiles by an integer.
- C. Periods are identified by an alphanumeric prefix and profiles by an integer.
- D. Both periods and profiles are identified by an integer.
Answer: B
NEW QUESTION 47
You want to display and edit data in different units of measure (UOM). Which of the following must you consider before you use UOM? Note: There are 3 correct Answers to this question.
- A. Analytics provide the user with the option to select the target unit of measure.
- B. Units of measure are usually not time-dependent.
- C. Unit of measure is an attribute of a master data type, such as Product.
- D. Units of measure are usually not time-independent.
- E. Conversion to the target unit of measure is handled by functionality of SAP IBP Excel UI
Answer: A,B,C
NEW QUESTION 48
......
SAP C_IBP_2105 Exam Description:
The "SAP Certified Application Associate - SAP Integrated Business Planning" certification exam verifies that the candidate possesses the basic knowledge in the area of the SAP supply chain planning. This certificate proves that the candidate has a basic overall understanding within this consultant profile of the industry solutions, and can implement this knowledge practically in projects under guidance of an experienced consultant. It is recommended as an entry-level qualification to allow consultants to get acquainted with the fundamentals of SAP Integrated Business Planning. Please note that this 2105 version of the exam takes part in the Stay Current with SAP Global Certification program. Once you pass this version of the exam, make sure that you start your stay current process. You will be required to take the quarterly stay current assessment for all subsequent SAP IBP releases via the SAP Learning Hub starting with the 2108 release to maintain your SAP IBP consultant certification status and badge. In order to participate in the stay current program and access the stay current enablement and assessment, you will need at minimum an SAP Learning Hub, edition for IoT and Digital Supply Chain subscription. (https://training.sap.com/learninghub)
SAP IBP Certification Exam Details:
| Exam Name | SAP Certified Application Associate - SAP Integrated Business Planning |
| Schedule Exam | SAP Training |
| Level | Associate |
| Reference Books | IBP100, IBP110, IBP200, IBP700, IBP300, IBP600 |
| Passing Score | C_IBP_2105 - 64% |
| Duration | 180 mins |
| Exam Code | C_IBP_2105 |
| Number of Questions | 80 |
| Exam Price | $550 (USD) |
| Sample Questions | SAP IBP Certification Sample Questions |
C_IBP_2105 Exam Dumps - Free Demo & 365 Day Updates: https://www.testsimulate.com/C_IBP_2105-study-materials.html