The Best HPE6-A66 Exam Study Material Premium Files and Preparation Tool (Jan-2024)

Get Instant Access to HPE6-A66 Practice Exam Questions

HP HPE6-A66 certification exam is designed for professionals who want to demonstrate their expertise in designing networks using Aruba products and technologies. Aruba Certified Design Associate Exam certification is ideal for architects, engineers, and consultants who work on network design projects that involve Aruba wireless solutions, including access points, controllers, and management systems.

HP HPE6-A66 exam, also known as the Aruba Certified Design Associate (ACDA) exam, is designed for professionals who are seeking to validate their skills and knowledge in designing and deploying Aruba wireless networks. HPE6-A66 exam covers a wide range of topics, including Aruba network architecture, design considerations, RF planning and site surveying, as well as security and troubleshooting. Passing the HPE6-A66 exam is a requirement for obtaining the ACDA certification, which is recognized worldwide as a standard for network design and deployment.

HPE6-A66 exam is an associate-level certification exam that validates the skills and knowledge required to design Aruba wireless networks. HPE6-A66 exam covers a wide range of topics, including the design of Aruba wireless networks, Aruba Mobility Master and Mobility Controllers, RF planning and site surveys, and WLAN security. Passing HPE6-A66 exam demonstrates that you have the knowledge and skills required to design and deploy efficient and secure wireless networks.

 

NEW QUESTION # 31
NewStellar has a main corporate campus in a business park with two adjacent buildings. Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters). The network architect has given you one floor to analyze, Building 1 Floor 2, shown in the attached exhibit.

This floor has a central main corridor with washrooms, stairs, elevators and supply and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters). Assuming that wireless coverage is not required in the central area, which square footage (square meter) value should a network architect use when determining the number of APs in a capacity design for each floor?

• A. 56.350 square feet {5,235 square meters)
• B. 338,100 feet {31,410 square meters)
• C. 47.000 square feet {4,365 square meters)
• D. 55.750 square feet {5,175 square meters)

Answer: A

NEW QUESTION # 32
A network architect is designing a new wired and wireless solution for for a company. The company has two buildings on a campus, which each building has three floors. The campus core will be placed in the basement of Building 1. Each wiring closet has eight strands of multi-mode OM3 grade fiber that connect to a wiring closet of the first floor of the building it is contained, referred to as a main distribution frame (MDF). The maximum distance between a floor's wiring closet and the MDF is 100 feet (30 meters). The maximum distance between the two MDFs and the campus core is no more than 150 feet (45 meters). There are eight strands of multi-mode OM3 grade fiber from these two MDF closets to the campus core.
Based on this information, which type of design should be used and what is the maximum speeds supported all uplinks for the existing the multi-mode fiber?

• A. three-tier and 40 Gbps
• B. three-tier and 10 Gbps
• C. two-tier and 40 Gbps
• D. two-tier and 10 Gbps

Answer: B

NEW QUESTION # 33
A network designer is documenting the number of physical sites for a customer that is within the scope of a redesign project. When determining the network purpose at each site, on what should the designer focus at each site? (Select two.)

• A. number of users
• B. ceiling height
• C. types of users and their devices
• D. square footage
• E. number of buildings

Answer: B,D

NEW QUESTION # 34
A customer currently has sets of three Aruba 5406R switches deployed for an access layer in multiple wiring closets in a building They are clustered in a VSF domain The customer wants to set up Multiple Active Detection (MAD) for the OOBM port, as well as use this port for remote management access. To simplify the connectivity, the customer wants to connect these three switches' OOBM ports to a separate switch in the wiring closet for the OOBM connectivity.
Which would be the most cost-effective solution that would meet the customer's requirements?

• A. 5406R
• B. 0
• C. 2930M
• D. 2930F

Answer: B

NEW QUESTION # 35
A network architect is designing a new wireless solution for a company The company needs seamless roaming and client and AP active load balancing. The company also requires an Aruba Mobility Master (MM) to manage the wireless infrastructure. Which Aruba feature does the architect need to include in the design?

• A. Clustering
• B. IAP VC
• C. Client Match
• D. AirMatch

Answer: A

NEW QUESTION # 36
Which feature does the Aruba AP 387 support?

• A. Indoor usage
• B. included external directional antennas
• C. 802.11 ax
• D. 60GHZRF

Answer: D

NEW QUESTION # 37
A company is redesigning their wireless network and will be upgrading all devices to support the latest wireless standards. The company is not near any radar installations. In order to keep wireless NIC power levels as low as possible to reduce interference issues and to take advantage of radar frequency ranges, what IEEE standard should APs support?

• A. 802.11 ax
• B. S02.11V
• C. S02.11h
• D. 802.11r

Answer: A

NEW QUESTION # 38
A company has hired a network architect to replace an existing legacy wireless and wired network The building is one-story and contains four wiring closets Based on the information the network architect gathered from the company, one 48-port POE+ switch and three 48-port non-POE+ switches will be placed in each wiring closet. One stacking domain should be created for each wiring closet that supports 40 Gbps uplinks.
Which stacking solution should the architect implement for the floor that meets the requirements and is the most cost-effective'?

• A. VSX
• B. Distributed trunking
• C. Backplane stacking
• D. VSF

Answer: A

NEW QUESTION # 39
A company has two buildings on a campus that are approximately 700 feet (214 meters) apart with a clear line of site. No fiber exists between the buildings; however, there is a need for connecting the networks in the buildings together. The connection between the two buildings will need to support peak rates over 1 Gbps.
Which solution should the company choose that will meet their requirements as well as being cost-effective?

• A. Two outdoor AP 367s
• B. Two outdoor AP 510s
• C. Multi-mode fiber between campus switches
• D. Two outdoor AP 387s

Answer: A

NEW QUESTION # 40
When determining a customer's agenda and clarifying their expectations for a new HPE/Aruba deployment, which two questions should be asked during the stakeholder checklist? (Select two.)

• A. What is the networking experience of onsite personnel?
• B. is a request for proposal or actual bill of materials (BOM) required?
• C. Which help desk system is deployed?
• D. What business problems are you trying to solve?
• E. What is your anticipated growth of the environment?

Answer: B,D

NEW QUESTION # 41
Which AP mode allows an AP to operate autonomously?

• A. IAP
• B. OCAP
• C. AM
• D. RAP

Answer: B

NEW QUESTION # 42
A customer has a need to track traffic patterns and anomalies on a pair of ArubaOS-CX 8400 series switches. Which technology will the customer need to deploy for these switches?

• A. 2 CiearPass
• B. NetEdit
• C. Mobility First
• D. Network Analysis Engine

Answer: B

NEW QUESTION # 43
A network architect is designing a wireless solution for a company that is leasing one floor in a multi-floor building in a downtown area. The customer is concerned about ensuring complete Wi-Fi coverage and pin-pointing RF hazards. What type of survey should the network architect perform?

• A. Virtual
• B. Active
• C. Spectrum clearing
• D. Passive

Answer: B

NEW QUESTION # 44
A company has a warehouse that requires ruggedized APs to provide wireless access The APs need to support these characteristics:
* 2 or more spatial streams
* 802.11 ac and 802.11 n support
Cat 7 Ethernet cabling will be used to connect the APs to POE+ capable switches Link aggregation should be employed between the APs and the Ethernet switches. Which would be the most cost-effective solution that would meet the company's requirements?

• A. AP 510 with external omnidirectional antennas and plastic AP cover
• B. AP 365 with integrated omnidirectional antennas
• C. AP 318 with external omnidirectional antennas
• D. AP 375 with external omnidirectional antennas

Answer: C

NEW QUESTION # 45
A university department has a program in video processing and editing. Students in the department use Wi-Fi to interact with the video servers. The editing and processing is done by the students accessing and using the video servers. However, the students must then stream their results, via Wi-Fi to their laptops to verify the results. A network architect has determined that no more than 20 APs will be needed for the Wi-Fi solution. Because of the large amount of bandwidth used during the streaming, the Aruba mobility controller solution will need to support 10 Gbps links.
Which solution would cost-effectively meet this customer's requirements?

• A. 0
• B. 1
• C. 2
• D. 7240XM

Answer: A

NEW QUESTION # 46
A company needs to replace an existing legacy wireless and wired solution with one that supports features like 802 11 ax for APs and logical switching for switches. The company is located on a single floor with two wiring closets. Assume that there will be 10 APs connected via POE+ to each wiring closet, along with 36 wired user connections All switches on a floor should be configured in a single stack. The distance between wiring closets is 100 feet (31 meters).
Which switching solution will minimally provide 10 Gbps uplinks at the most cost-effective price, while still meeting the company's requirements?

• A. 3810M switches
• B. 2930M switches
• C. 5406R switches
• D. 2930F switches

Answer: B

NEW QUESTION # 47
......

Validate your Skills with Updated HPE6-A66 Exam Questions & Answers and Test Engine: https://www.testsimulate.com/HPE6-A66-study-materials.html