[Sep-2021] Network Appliance NS0-173 Dumps – Reduce Your Chance of Failure in NS0-173 Exam

To help you achieve your ultimate goal, we suggest the actual Network Appliance NS0-173 dumps for your Cisco and NetApp FlexPod Design Specialist exam preparation to use as your guideline.

NEW QUESTION 14
A customer is evaluating management tools for a new FlexPod infrastructure. They desire a tool that can orchestrate the provisioning of UCS compute nodes, NetApp storage, and VMware networking.
Which tool satisfies the requirements of this customer's heterogeneous environment?

• A. NetApp OnCommand Unified Manager
• B. UCS Central
• C. UCS Director
• D. NetApp OnCommand Insight

Answer: C

 

NEW QUESTION 15
A customer with a FlexPod Express solution wants to enable remote access to the NetApp storage component.
In this scenario, which two access methods are recommended? (Choose two.)

• A. Telnet
• B. RDP
• C. SSH
• D. SAML

Answer: A,C

 

NEW QUESTION 16
A customer recently configured its Cisco UCS, and within the Chassis Discovery policy, they set the link group preference to Port Channel.
Which two benefits would they derive from this link group preference? (Choose two.)

• A. All the links between the Cisco Fabric Interconnects and chassis IOM are shared.
• B. Traffic is load balanced across the links.
• C. All the links between the Cisco Fabric Interconnects and chassis IOM are pinned.
• D. Each blade has an assigned Cisco Fabric Interconnects link.

Answer: A,B

 

NEW QUESTION 17
Click the Exhibit button.

A customer wants to ensure that FlexPod Datacenter connections to the storage layer are highly available. Which two configurations shown in the exhibit satisfy the customer's requirements? (Choose two.)

• A. III.
• B. IV
• C. I.
• D. II.

Answer: A,B

 

NEW QUESTION 18
Your customer has a FlexPod implementation and wants to use life-cycle management to validate, monitor, and optimize the FlexPod infrastructure.
In this situation, which management tool should your customer use?

• A. NetApp OnCommand Unified Manager
• B. Cisco UCS Manager
• C. NetApp Converged System Advisor
• D. Cisco UCS Director

Answer: D

Explanation:
Cisco UCS Director can be an integral companion for FlexPod because it allows holistic management through centralized automation and orchestration from a single, unified view. When FlexPod and Cisco UCS Director are combined, IT can shift time and focus from managing infrastructure to delivering new service innovation. Used together, FlexPod and Cisco UCS Director deliver:

 

NEW QUESTION 19
The storage administrator must change the vHBA settings bound to a template associated with a production server.
What happens when the settings are reconfigured in this scenario?

• A. The vHBA template is deleted from UCS Manager.
• B. The vHBA configuration change does not affect LUN access.
• C. The service profile template that is associated with the server is initialized.
• D. The server that is associated with the service profile reboots.

Answer: C

 

NEW QUESTION 20
A client has a requirement to set up a FlexPod Datacenter with the NetApp fabric MetroCluster architecture. You want to enable connectivity between the deployments.
In this design, which two components are required to accomplish this task? (Choose two.)

• A. Cisco Nexus 3000 switches
• B. Cisco Nexus 7000 switches
• C. Cisco Nexus 9000 switches
• D. Cisco MDS 9300 switches

Answer: B,C

 

NEW QUESTION 21
A customer is designing a FlexPod solution with VMware 6.x in a SAN boot environment using FCoE. The customer has predetermined the WWPN values for the NetApp LIFs and the UCS vHBAs. The customer is now working on the design workflow for the SAN boot process.
In this scenario, which three FlexPod environment objects are required for SAN connectivity? (Choose three.)

• A. FC zones
• B. initiator groups
• C. UCS boot policies
• D. NetApp export policies
• E. UCS IQN pools

Answer: C,D,E

 

NEW QUESTION 22
An administrator decides to connect storage directly to UCS Fabric Interconnect to support FCoE within a FlexPod configuration.
In this scenario, which port type should be defined on the Fabric Interconnect ports that are connected to the storage controller?

• A. uplink port
• B. appliance port
• C. server port
• D. monitor port

Answer: A

 

NEW QUESTION 23
A customer is planning to use a pair of MDS switches in a FlexPod design to host a few SAN workloads.
In this scenario, which two features should be enabled on the MDS switches for a successful configuration? (Choose two.)

• A. NPIV
• B. port-channel-trunk
• C. NPV
• D. fport-channel-trunk

Answer: A,B

 

NEW QUESTION 24
A customer wants to configure SAN boot for its FlexPod system. The customer must consider the minimum number of FC ports to be configured on each node in the ONTAP storage solution.
In this scenario, what is the minimum number of FC ports that should be configured per storage node?

• A. three
• B. two
• C. four
• D. one

Answer: A

 

NEW QUESTION 25
What are characteristics of the Cisco UCS 5108 blade chassis?

• A. 6 RU, 6 half-width UCS B-series blades, 80 Gbps I/O bandwidth
• B. 4 RU, 8 half-width UCS B-series blades, 40 Gbps I/O bandwidth
• C. 4 RU, 6 half-width UCS B-Series blades, 160 Gbps I/O bandwidth
• D. 6 RU, 8 half-width UCS B-series blades, 160 Gbps I/O bandwidth

Answer: D

 

NEW QUESTION 26
You are configuring a FlexPod system for NAS protocols. You want to ensure that there are multiple paths between the initiators and targets in the solution.
Which two steps will accomplish this task? (Choose two.)

• A. Disable LACP.
• B. Configure the VSANs in the Cisco Nexus 5000 switches.
• C. Configure the VLANs in Cisco UCS Manager as Common/Global.
• D. Allow the VLANs over the vPC peer link.

Answer: A,C

 

NEW QUESTION 27
A client has a FlexPod Datacenter solution with four active fabric links in port channel mode established between the Cisco Fabric Interconnects and the IOMs on a Cisco 5108 blade chassis. The blade chassis is fully populated with Cisco UCS B200M5 blades. A worker in the data center inadvertently unplugs the fourth uplink cable from IOM-A while working in the rack.
In this scenario, what happens to the network traffic?

• A. Connectivity for servers 3, 4, 7, and 8 all fail over to IOM-B.
• B. Traffic is load-balanced within IOM-A.
• C. There is a loss of connectivity for servers 4 and 8.
• D. Traffic is load-balanced within IOM-B.

Answer: A

 

NEW QUESTION 28
Click the Exhibit button.

You have designed a FlexPod Express solution that uses a NetApp ONTAP controller, Cisco UCS C-Series servers, and Cisco Nexus 3000 Series switches, as shown in the exhibit. Which three storage protocols are supported in this design? (Choose three.)

• A. FCoE
• B. SMB
• C. iSCSI
• D. FC
• E. NFS

Answer: C,D,E

 

NEW QUESTION 29
Which Cisco Nexus series switch supports NX-OS standalone mode or Application Centric Infrastructure (ACI) fabric mode?

• A. Nexus 7000
• B. Nexus 5000
• C. Nexus 3000
• D. Nexus 9000

Answer: D

 

NEW QUESTION 30
A customer is designing a FlexPod Datacenter with Cisco UCS C-Series servers. They intend to manage the solution with Cisco UCS Manager. They want to cable the servers to the Cisco UCS Fabric Interconnects.
In this scenario, which three configurations are supported? (Choose three.)

• A. DualWire Management mode
• B. Cluster mode
• C. Direct Connect mode
• D. SingleConnect mode
• E. Multipath mode

Answer: A,C,D

Explanation:
Dual-wire Management (Shared LOM): Shared LAN on Motherboard (LOM) ports on the rack server are used exclusively for carrying management traffic. A separate cable connected to one of the ports on the PCIe card carries the data traffic. Using two separate cables for managing data traffic and management traffic is also referred to as dual-wire management.
SingleConnect (Sideband): Using Network Controller Sideband Interface (NC-SI), the Cisco VIC card connects one cable that can carry both data traffic and management traffic. This feature is referred to as SingleConnect.
Direct Connect Mode: Cisco UCS Manager supports an option to connect the Cisco UCS C-Series Rack- Mount Server directly to the FIs. This option enables Cisco UCS Manager to manage the Cisco UCS C- Series Rack-Mount Servers using a single cable for both management traffic and data traffic. The Cisco UCS VIC connects to the FI of the system. This connection uses a single connection from each VIC to each FI.
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm4-0/b_C-Series- Integration_UCSM4-0/b_C-Series-Integration_UCSM4-0_chapter_01.html

 

NEW QUESTION 31
A customer wants to deploy a FlexPod solution that involves directly connecting the NetApp AFF storage using the FCoE protocol to the Cisco UCS Fabric Interconnects.
In this scenario, which Cisco UCS Fibre Channel mode would be used to accomplish this task?

• A. access mode
• B. switching mode
• C. end host mode
• D. trunk mode

Answer: B

 

NEW QUESTION 32
A customer has deployed a FlexPod Datacenter with Red Hat Enterprise Linux OpenStack Platform. The Cinder storage volumes that are attached to the Nova instances are not available.
Based on the terms of the cooperative support model, which three companies would the customer use to open a support case? (Choose three.)

• A. Cisco
• B. NetApp
• C. Red Hat
• D. VMware
• E. Microsoft

Answer: A,B,C

 

NEW QUESTION 33
A customer is investigating options for implementing a FlexPod Datacenter solution that is using vSphere 6.x.
In this scenario, which two resources would be important to review? (Choose two.)

• A. Cisco Validated Design documents
• B. NetApp Technical Report
• C. Cisco Cloud Center documentation
• D. VMware vSAN documentation

Answer: A,B

 

NEW QUESTION 34
A FlexPod solution has been configured for iSCSI SAN boot with multiple paths between the server and the storage.
In this scenario, how many initiators (IQNs) per server will need to be added in the corresponding igroup in ONTAP?

• A. two
• B. three
• C. four
• D. one

Answer: C

Explanation:
The initator group REST API allows you to create, update, delete, and discover initiator groups, and add and remove initiators that can access the target and associated LUNs.

 

NEW QUESTION 35
......

Accurate & Verified Answers As Seen in the Real Exam here: https://www.testsimulate.com/NS0-173-study-materials.html