[Sep-2021] CompTIA SK0-004 Dumps – Reduce Your Chance of Failure in SK0-004 Exam
To help you achieve your ultimate goal, we suggest the actual CompTIA SK0-004 dumps for your CompTIA Server+ Certification Exam exam preparation to use as your guideline.
NEW QUESTION 129
A server technician is performing a server installation. This server must be able to resolve host names for users running a variety of client operating systems. At a minimum, which of the following services should be enabled on the new server? (Select TWO).
- A. LDAP
- B. DHCP
- C. NAT
- D. WINS
- E. DNS
- F. SNMP
Answer: D,E
NEW QUESTION 130
Which of the following storage technologies provides block-level data access to storage volumes and arrays? (Choose two.)
- A. CIFS
- B. DAS
- C. NFS
- D. SAN
- E. Optical drive
- F. NAS
Answer: B,D
NEW QUESTION 131
The network that is located between the public Internet and the company's internal network is known as:
- A. IPSec.
- B. DMZ.
- C. VPN.
- D. intranet.
Answer: B
NEW QUESTION 132
An existing server has three 1 TB 7200 RPM SATA drives and five empty drive bays. The network manager orders three 2 TB 5400 RPM SAS drives. The technician installs them properly, but when attempting to provision the drives, a message displays "Type mismatch". Which of the following is the reason for this error message?
- A. The drive sizes must match
- B. There is a firmware mismatch on the hard drives
- C. The SATA and SAS drives cannot be mixed
- D. the drives must be from the same manufacturer
Answer: C
NEW QUESTION 133
While reviewing a network connectivity issue to a Linux server, the systems administrator issues the ifconfig command with the following results:
According to the output above, which of the following is the problem?
- A. The adapter is not in an "UP" state
- B. The broadcast address is incorrect
- C. The netmask is incorrectly configured
- D. The adapter is in "BROADCAST" mode
Answer: A
NEW QUESTION 134
An administrator needs to run five CAT6 cable runs to a new server. Which of the following steps should the administrator do FIRST?
- A. Bundle the cables with velcro or zip ties.
- B. Label both ends of the cables with unique identifiers.
- C. Install the cables into cable trays.
- D. Verify the bend radius of the cables.
Answer: B
NEW QUESTION 135
A systems administrator was tasked with decommissioning a server that contains sensitive dat a. The systems administrator powered down the server so it was no longer accessible from the network. Two weeks later, during an investigation by security, it is discovered that an employee within the company accessed the server that morning and attempted to access the restricted data. Physical security logs show no one entered the server room. Which of the following hardening techniques was MOST likely neglected on this server?
- A. Stopping unneeded services
- B. Disabling WOL
- C. Installing only required software
- D. Enabling intrusion detection
Answer: B
NEW QUESTION 136
A user is unable to save an image file to their home directory on a server. The server technician checks the disk space and ACL on the user's home directory and finds that the user has enough space and required access to write to the directory. Which of the following is the MOST likely reason why the user is unable to save the file?
- A. The hard drive containing the user's home directory, is failing.
- B. The user is attempting to save a file with a prohibited file extension.
- C. The user does not have permission to save files to the server.
- D. There are too many open files on the server.
Answer: B
NEW QUESTION 137
A server administrator has been given the following information from the network team in order to configure IP addresses on a new server:
Network Address: 199.90.10.32/28
The network team also instructed the server administrator to use the LAST usable address on the given network. Which of the following IP address/subnet mask combinations should the server administrator use?
- A. 199.90.10.47, 255.255.255.240
- B. 199.90.10.49, 255.255.255.240
- C. 199.90.10.47, 255.255.255.224
- D. 199.90.10.48, 255.255.255.240
Answer: A
NEW QUESTION 138
A technician notices a rack mounted server is beeping without booting up. The NEXT step to diagnose this issue would be to:
- A. continue to power cycle the server until it boots normally.
- B. count the beeps and reference the service manual.
- C. install the server into a different rack.
- D. disable the alarm within the server.
Answer: B
NEW QUESTION 139
A system administrator wants to assure that a server is responsive. Which of the following networking tools should the administrator use to verify network connectivity?
- A. ipconfig
- B. netstat
- C. ping
- D. arp
Answer: C
NEW QUESTION 140
A technician is tasked with connecting a server to a NAS. Which of the following connection types should be used?
- A. Ethernet
- B. Fiber Fabric
- C. HBA
- D. Multiplexer
Answer: A
NEW QUESTION 141
A server administrator is notified that all three hard disks in a server array have failed. Which of the following is the MOST likely cause?
- A. Incompatible BIOS
- B. Backplane failure
- C. Incorrect firmware version
- D. Cache battery failure
Answer: B
NEW QUESTION 142
A technician would like to restrict when internal hardware components on the server are accessed. Which of the following server hardening techniques should the technician
implement?
- A. Chassis lock
- B. Intrusion detection
- C. BIOS password
- D. Disable WOL
Answer: A
NEW QUESTION 143
A technician is tasked with creating servers that are fault tolerant and highly available.
Which of the following would be the BEST solution for this task?
- A. Clustering
- B. Virtualization
- C. Round robin
- D. Load balancing
Answer: A
NEW QUESTION 144
A server administrator was hired by a company to manage and maintain 20 Windows-based servers in five geographical locations. The server administrator is going to run patches manually to ensure they are applied, which would address some major security-related items. Which of the following methods would MOST likely be the way to handle this task?
- A. Physically go to each server
- B. Use the management interface on the server
- C. Use RDP to log into each server
- D. Schedule automatic patching
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION 145
Clients cannot connect to the network. A technician determines that port 68 is not open.
Which of the following protocols is being blocked?
- A. DNS
- B. POP3
- C. LDAP
- D. DHCP
Answer: D
NEW QUESTION 146
A user is trying to connect to www.testnetwork.net with a desktop web browser. The user cannot connect to this website, although other sites can be reached. Which of the following tools should the administrator use at the desktop to determine the specific issue? (Choose two.)
- A. netuse
- B. nslookup
- C. netcheck
- D. ping
- E. route
Answer: B,D
NEW QUESTION 147
Which of the following expansion slots would be BEST for a fiber network card?
- A. AGP
- B. ISA
- C. PCIe
- D. PCIx
Answer: C
NEW QUESTION 148
A new version of the primary OS used by a company has been released. Due to some significant changes in the OS, a system administrator wants to see which remotely accessible services are enabled by default to access the security risk prior to upgrading to the new version. Which of the following utilities should the administrator use?
- A. Cipher program
- B. Telnet client
- C. Port scanner
- D. Packet sniffer
Answer: C
NEW QUESTION 149
Which of the following is the number of 7-inch high servers that can be installed in a 42U rack?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 150
......
Accurate & Verified Answers As Seen in the Real Exam here: https://www.testsimulate.com/SK0-004-study-materials.html