Use Real JN0-1362 Dumps - Juniper Correct Answers updated on 2021

JNCDS-SP JN0-1362 Exam Practice Dumps

NEW QUESTION 15
Your backbone network has a single dark fiber between two backbone sites within the same metro area. Currency this link is being used as a point-to-point 100ObE link between the routers using gray optics. The link has been experiencing high utilization and you are asked to propose network design changes to increase capacity across this network segment.
Which statement is true in this scenario?

• A. New optical interfaces will need to be added to the routers.
• B. Enabling MPLS will increase capacity due to statistical multiplexing.
• C. Gray optics can be used to increase capacity by enabling additional wavelengths.
• D. Interfaces need to be reconfigured for 200GbE.

Answer: A

 

NEW QUESTION 16
Your customer requires redundant routers and wants to use VRRP for the default gateway at their Internet edge.
Which two statements are correct in this scenario? (Choose two )

• A. VRRP for IPv6 provides a much faster switchover to an alternate default router than IPv6 neighbor discovery procedures
• B. The VRRP master and backup send advertisements to each other at regular intervals.
• C. VRRP dynamically elects master and backup routers
• D. VRRP will only support two routers

Answer: B,C

 

NEW QUESTION 17
Your customer is automating the management of their WAN network by adding vendor-agnostic workflow applications.
Which Junos feature would be used with the workflow applications to manage Junos devices?

• A. XML API
• B. REST API
• C. JSA scripts
• D. Op scripts

Answer: B

 

NEW QUESTION 18
Click the Exhibit button

Referring to the network design shown in the exhibit, you must ensure that VPN data between Site1 and Site2 will be earned over a single end-to-end LSP.
How would you advertise PE1's loopback address to accomplish this task?

• A. over a single EBGP session (IPv4 unicast NLRI) between PE1/PE4
• B. over BGP-LU sessions between the PE1/B1. B1/B2 and B2/PE4
• C. over a single MP-IBGP session (L3VPN NLRI) between PE1/PE4
• D. over a single IBGP session (IPv4 unicast NLRI) between PE VPE4

Answer: B

 

NEW QUESTION 19
Which technology allows a router to continue to forward packets even if the routing protocol adjacencies go down?

• A. nonstop bridging
• B. graceful restart
• C. graceful Routing Engine switchover
• D. nonstop routing

Answer: B

 

NEW QUESTION 20
Your applications are migrating from a legacy data center to an EVPN over a VXLAN-based VM environment. A few critical legacy applications not support this environment and must remain on bare metal servers and the applications must be able to access the Internet.
What must be included in the VXLAN design to satisfy these requirements?

• A. VTEP tunneling
• B. SR-IOV
• C. nested VM capability
• D. VXLAN gateway

Answer: D

Explanation:
https://www.juniper.net/documentation/en_US/release-independent/solutions/topics/concept/solutionevpn
-vxlan-understanding.html

 

NEW QUESTION 21
Your customer is deploying a large number of Juniper WAN edge devices spread across several remote locations. The customer wants to create an isolated out-of-band management network where these devices can be securely accessed and managed using the CLI and, where possible, the WebUI Which two statements will satisfy the customer's requirements'? (Choose two)

• A. Ensure the devices are running the FIPS version of the Junos OS.
• B. Enable the SSH and HTTPS services on each WAN edge device
• C. Implement a management configuration group on all WAN edge devices.
• D. Place all management interfaces on a common Layer 2 network

Answer: A,B

 

NEW QUESTION 22
You are asked to prepare a design proposal for a new enterprise customer. You must ensure that all traffic is routed through and inspected by an SRX Series device located at the corporate headquarters.
In this scenario which solution should be used?

• A. Use a Junos Fusion Enterprise solution
• B. Use a hub-and-spoke Layer 3 VPN solution
• C. Use a full mesh Layer 3 VPN solution
• D. Use a full mesh SD-WAN solution

Answer: B

 

NEW QUESTION 23
Your customer is paying for traffic prioritization and you must ensure that all traffic from their 172.27.10.0/24 network receives top priority through your network.
Which action will satisfy this requirement?

• A. Apply a multifield classifier to the ingress interfaces.
• B. Apply a custom rewrite rule to the ingress interface.
• C. Apply a behavior aggregate classifier to the egress interface.
• D. Apply a custom scheduler map to the ingress interface.

Answer: A

Explanation:
We would need MF to match the address and set the forwarding class.

 

NEW QUESTION 24
You are designing an EVPN data center solution with VXLAN.
Which two statements are true in this scenario? (Choose two)

• A. The original MAC address is advertised to remote PEs.
• B. The original MAC address is prepended to a VXLAN VNI.
• C. The original MAC address is replaced by a VXLAN VNI.
• D. The original MAC address is encapsulated within the VXLAN frame.

Answer: A,D

 

NEW QUESTION 25
Your customer wants to use NorthStar to communicate with network devices and acquire the MPLS topology.
Which protocol is recommended for this purpose?

• A. ISIS
• B. BGP-LS
• C. OSPF
• D. PIM-SSM

Answer: B

 

NEW QUESTION 26
You work for an organization providing hosting services for customer application VMs Traditional, your organization maintained isolation between customer workloads by assigning unique VLAN IDs to each customer network. Your organization is approaching the upper limit of 4094 VLANs available to uniquely identify customer networks You need to alleviate this limitation and provide more than 4094 unique network identifiers.
Which technology would satisfy these requirements?

• A. MP-BGP
• B. MPLS
• C. VXLAN
• D. EVPN

Answer: C

 

NEW QUESTION 27
Exhibit.

Referring to the exhibit, which two methods would be used by the designer of ISP E to ensure that traffic between ISP C and ISP A will traverse through ISP B? (Choose two.)

• A. Apply the BGP export policy (to IBGP peers) on R4 and R5 to adjust the MED on the ISP C routes so that the path through ISP D is less preferred.
• B. Apply the BGP import policy (to EBGP peers) on R4 anaVor R5 to adjust the local preference on the ISP C routes so that the path through ISP B is more preferred
• C. Apply the BGP import policy (to EBGP peers) on R4 to adjust the ORIGIN for the routes received from ISP B to unknown.
• D. Apply the BGP import policy (to EBGP peers) on R4 and R5 to modify the AS PATH attribute so that the path through ISP D is less preferred.

Answer: A,D

 

NEW QUESTION 28
Exhibit.

Referring to the exhibit which statement is true about the connectivity between service provider A and B regarding the customer's network information?

• A. The service providers must set up MP-BGP between each other to support this inter-network routing.
• B. The service providers must set up MPLS label exchange between each other for this scenario to work.
• C. The service providers may not be aware that they are providing inter-network routing for the customer.
• D. The customer is acting as a colocation (meet-me) for an inter-network routing scenario shown in the exhibit.

Answer: A

 

NEW QUESTION 29
You are asked to design a Cloud CPE solution that can dynamically add new sites to an existing MPLS Layer 3 VPN. The CPE for each new site must support the service chaining of multiple VNFs.
Which Juniper Networks Cloud CPE solution supports these requirements?

• A. Distributed Cloud CPE - Managed Internet
• B. Distributed Cloud CPE - Option 1
• C. SD-WAN
• D. Centralized Cloud CPE

Answer: B

 

NEW QUESTION 30
......

Get ready to pass the JN0-1362 Exam right now using our JNCDS-SP  Exam Package: https://www.testsimulate.com/JN0-1362-study-materials.html