Real NCP-5.15 dumps - Real Nutanix dumps PDF in here [Oct-2022]
Realistic TestSimulate NCP-5.15 Dumps PDF - 100% Passing Guarantee
NEW QUESTION 96
Which configuration should an administrator make in Prism to receive a summary of the alerts every 24 hours?
- A. SNMP
- B. Individual Alerts
- C. Syslog
- D. Email Digest
Answer: D
Explanation:
https://portal.nutanix.com/page/documents/details/?targetId=Prism_Central_Guide-Acr_v4_6:mul_alerts_management_pc_c.html Prism Central allows you to configure the alert messages sent by Prism Central. To configure alert settings, reporting rules, and message templates, do the following:
Note: Alert emails sent by Prism Central are in addition to any alert emails you might have configured on individual clusters through the Prism web console. You will receive email from both entities in this case. Prism Central alert emailing is not enabled by default; you must explicitly enable it and specify the recipients (Nutanix customer support and/or supplied email addresses).
Do one of the following:
In the gear icon pull-down list of the main menu, select Alert Email Configuration.
In the Alerts dashboard, click the Email Configuration button.
The Alert Email Configuration window appears.
Click the Settings tab and do the following:
Enable Prism Central to sent alert emails.
Check the Email Every Alert box to send an email whenever the event occurs.
Check the Email Daily Digest box to send a cumulative (24 hour) list of alerts once a day.
You can check one or both boxes. If neither box is checked, no alert emails are sent by Prism Central.
Check the Nutanix Support box to send alert notification to Nutanix customer support.
To send alert notifications to others, enter their email addresses in a comma separate list in the field below the Nutanix Support box.
Click the Apply button to apply the changes and continue the configuration (or click the Save button to apply the changes and close the window).
The Connection Status section displays mail transport status information. In this example, an SMTP server is configured for mail service. Clicking the Details link opens the SMTP server settings window
NEW QUESTION 97
In which two scenarios is Native Key Management Server supported? (Choose two)
- A. XenServer and AHV mixed cluster.
- B. KVM and AHV mixed cluster.
- C. ESXi and AHV mixed cluster.
- D. Hyper-V and AHV mixed cluster.
Answer: C,D
NEW QUESTION 98
what command initiated from a cvm, is used to view the pNICs on all AHV nodes?
- A. allssh ovs-appctl bond/show
- B. allssh ssh [email protected] ovs-appctl bond/show
- C. hostssh ssh [email protected] ovs-appctl bond/show
- D. hostssh ovs-appctl bond/show
Answer: D
NEW QUESTION 99
Which set of steps should be used to stop the cluster in Nutanix operations?
- A. 1. Shut down Nutanix controller VMs. 2. Log on to a running controller VM in the cluster with SSH. 3.
Stop the Nutanix cluster. - B. 1. Shut down Nutanix CVMs and Guest VMs. 2. Log on to a running controller VM in the cluster with SSH. 3. Stop the Nutanix cluster.
- C. 1. Log on to a running Controller VM in the cluster with SSH. 2. Shut down all other Controller VMs.
3.Stop the Nutanix clusters. - D. 1. Shut down all Guest VMs. 2. Log on to a running controller VM in the cluster with SSH. 3. Stop the Nutanix cluster.
Answer: D
NEW QUESTION 100
Write I/O that is deemed sequential will enter which component of the Distributed Storage Fabric first?
- A. Extent store
- B. Cache
- C. Metadata Ring
- D. Oplog
Answer: A
NEW QUESTION 101
Refer to Exhibit.
An administrator increases the cluster RF to 3. The containers are not modified.
What will the new values in the data resiliency dashboard be for FAILURES TOLERABLE for the Zookeeper and Extent Groups components?
- A. Zookeeper = 2 and Extent Groups = 2
- B. Zookeeper = 1 and Extent Groups = 2
- C. Zookeeper = 1 and Extent Groups = 1
- D. Zookeeper = 2 and Extent Groups = 1
Answer: D
NEW QUESTION 102
What action should an administrator take to verify the ability to receive email alerts from a Nutanix cluster?
- A. Add an email address to the alert configuration list.
- B. Click the test button on the SMTP configuration.
- C. Pull the first SSD out of the node.
- D. Click the configuration for SNMP and add a destination.
Answer: D
NEW QUESTION 103
An administrator needs to relocate an AHV cluster to a new datacenter during a maintenance window. The cluster will use the same IPs in the new datacenter.
Which two steps should be taken to prepare for this task? (Choose two.)
- A. Reconfigure IPMI for the new datacenter
- B. Shut down all user VMs in the cluster
- C. Stop all Nutanix Files clusters
- D. Relocate the linked LDAP server
Answer: C,D
NEW QUESTION 104
An administrator logs in to Prism Element goes to the Network view, and sees the output shown in the exhibit.
Which three steps must the administrator take to increase throughput to the host? (Choose three.)
- A. Change the bond mode to balance-slb or balance-tcp.
- B. Change the VLAN ID to a higher priority ID.
- C. Connect the 10Gb interfaces to the physical switch.
- D. Add a new switch to the network and connect 1Gb interfaces to it.
- E. Remove any 1Gb interfaces still connected from the default bond.
Answer: A,B,C
NEW QUESTION 105
Which Nutanix feature allows a Nutanix cluster to present iSCSI storage to an external devices?
- A. Storage Pool
- B. Storage container
- C. Acropolis block service
- D. Acropolis File Service
Answer: C
NEW QUESTION 106
How should an administrator enable secure access to Volumes using a password?
- A. iSER
- B. SAML
- C. CHAP
- D. LDAP
Answer: C
Explanation:
Explanation
https://portal.nutanix.com/page/documents/details/?targetId=Web-Console-Guide-Prism-v50:wc-block-services- Provision storage on the Nutanix cluster by creating a volume group. Create a client whitelist to enable access to the volume group by using the IP addresses or client initiator IQNs in a whitelist (as part of the volume group configuration). Create a secret for the volume group if you are using CHAP authentication.
NEW QUESTION 107
An administrator notices that most of the VMs in the cluster are on one host. Users report that an application seems to respond slowly. The application server VM has significantly more memory assigned to it than other VMs.
How should the administrator fix this issue?
- A. Migrate the VM to a different host.
- B. Reduce the amount of memory assigned to the VM.
- C. Increase the memory on the CVM.
- D. Add more memory to the VM.
Answer: A
NEW QUESTION 108
What are the two effects of using Data-at-Rest Encryption on a Nutanix cluster? (Choose two.)
- A. Software-based Data-at-Rest Encryption cannot be disabled.
- B. Native KMS requires minimum of a four-node cluster.
- C. Encryption is only supported on an empty cluster.
- D. An External KMS server must exist outside of the encrypted cluster.
Answer: A,D
NEW QUESTION 109
An administrator needs to boot a VM to a bootable CD. The administrator tries to configure the VM to boot to it, select to add disk, and goes to the images available. The image for the bootable CD is unavailable.
What is the Likely issue?
- A. The VM needs to have a standard disk attached before it can boot to a CD.
- B. The bootable CD image is corrupted during creation.
- C. The administrator selected a disk attached before it can boot to a CD.
- D. The CD-ROM interface is too slow.
Answer: C
NEW QUESTION 110
Clusters are configured with an http proxy server an administrator wants to deploy prism central Which scenario require to the administrator to configure the http proxy whitelist method?
- A. ssl port 443 not pen in proxy
- B. http port 8000 not open in proxy
- C. http port 80 not open in proxy
- D. ssl port 9440 not open in proxy
Answer: D
NEW QUESTION 111
An administrator is reviewing performance of a core banking system that routinely has 20,000 concurrent users. During, business hours, the CPU on the applications servers runs at close to 100%. The administrator needs to determine if there is a performance issue specific to the app servers, the database servers, or all servers on the cluster.
Which metrics should the administrator review in Prism Analysis Graphs?
- A. Cluster IO, Network, Database and App Server CPU
- B. Cluster IO, CPU, Memory, Network, App Server CPU
- C. Cluster CPU and Memory Only
- D. Cluster IO, CPU, Memory and Database and App Server CPU
Answer: D
NEW QUESTION 112
A VM in a 12-node Nutanix cluster is hosting an application that has specific Physical GPU requirements.
Only three nodes in the cluster meet this requirement.
The administrator wants to allow a general workload to be distributed across all nodes in the cluster and must make sure that the node hosting the VM meets its requirements.
How should the administrator perform this task?
- A. Over-Provision the application VM with additional virtual GPUs.
- B. Configure VM-Host affinity for the nodes that meet the application's GPU requirement.
- C. Configure anti-affinity rules between the application VM and the other VMs running on the cluster.
- D. Create a sperate three-node cluster using the nodes that meet the requirement.
Answer: B
NEW QUESTION 113
Refer to the exhibit.
System Non-Root Partition Usage shows a warning or critical alert The administrator needs to change the frequency of checks and alerts to respond more quickly.
Where in Prism Element should the administrator change the frequency of checks and alerts?
- A. Alerts Dashboard > Manage Checks > Frequency
- B. Health Dashboard > Manage Crocks > Frequency
- C. Alerts Dashboard > Manage Checks > Schedule
- D. Health Dashboard > Manage Checks > Schedule
Answer: A
NEW QUESTION 114
what is the purpose of the nutanix oplog?
- A. random write i/o buffer
- B. sequential read i/o buffer
- C. aos services active memory space
- D. aos log files repository
Answer: A
NEW QUESTION 115
Which component ensures uniform distribution of data throughout the cluster to eliminate hot spots and speed up rebuilds?
- A. High Availability
- B. Distributed Storage Fabric
- C. Acropolis App Mobility Fabric
- D. Cassandra
Answer: D
NEW QUESTION 116
Which expected operations during node addition when the new node has a different AOS version?
- A. The node is added and a separate upgrade operation must be performed.
- B. The entire cluster is upgraded to the latest one-click release.
- C. The addition fails and forces the administrator to image using standalone Foundation.
- D. The node is automatically re-imaged using the software currently running in the cluster.
Answer: C
NEW QUESTION 117
......
Verified NCP-5.15 dumps Q&As Latest NCP-5.15 Download: https://www.testsimulate.com/NCP-5.15-study-materials.html