Cisco 300-425 Practice Verified Answers - Pass Your Exams For Sure! [2022]

Valid Way To Pass CCNP Enterprise's  300-425 Exam

Having this certificate validates your ability to investigate and execute both WAN and LAN networks. Also, you will be seen as a person who has what it takes to team up with the authorities on the issues identified with voice, wireless, video solutions, and advanced security. The individuals who hold Cisco CCNP Enterprise have a range of capabilities that are usually required in big and established businesses. Among the positions, which you will qualify to apply for after obtaining this certification, are the following:

• Systems Engineer;
• Support Engineer;
• Network Investigator;
• Network Technician;
• Network Specialist.
• Network Security Experts;
• Network Analyst;
• Network Director;
• Network Engineer;

With this professional-level certification under your belt, you will have more job opportunities and you can count on a high salary. From the PayScale figures, the average annual salary for a Network Administrator who is certified with CCNP Enterprise is $59,762. It usually starts at $49,485 and ranges up to $70,644 as seniority increases. The salary is usually highly dependent on the position. For example, a Network Engineer earns an average of $74,191.

What Are the Topics Tested in Cisco ENWLSD 300-425?

If you want to get the Enterprise Wireless Design certification or CCNP Enterprise by passing the ENWLSD 300-425 exam, you should prepare to demonstrate your skills and knowledge related to the following four major topics:

• Wireless Site Survey
• WLAN High Availability
• Mobility
• Wireless and Wired Infrastructure

The first topic covers approximately 25% of the exam's questions. When studying for it, candidates will learn about how to collect design requirements and how to evaluate different constraints. They will develop advanced skills on how to manage client density, AP type, real-time apps, deployment type, and security. Also, this domain covers information on how to describe material attenuation and how to weigh its effects on their wireless designed network. Besides, applicants should be proficient in performing and analyzing Layer 1, pre-deployment, post-deployment, and predictive site survey. Last but not least, another subtopic included in this section handles the proper utilization of the planning and evaluation tools for the most important network metrics. Candidates will discover how to use Spectrum Analyzer, Ekahau, AirMagnet, and Chanalyzer tools.

The second domain has 25% of the syllabus and focuses on mobility concepts. To manage related questions in the test, candidates need to understand how to design a mobility group following the requirements imposed by different mobility roles. Also, this topic takes examinees through various concepts that will allow them to properly optimize client roaming. Another important element included here is mobility tunneling validation for the data and control path.

The third section emphasizes wired and wireless infrastructure. Its total weight in the exam's content is around 30%. It is the most important topic since knowledge in this sphere helps individuals determine which are the most important physical infrastructure requirements for their business environment, handle AP power, cabling, mounting, grounding, and switch port capacity. They will also know more about determining logical infrastructure conditions. During preparation, candidates will discover how to identify the proper WLC/AP licensing requirements based on the current wireless architecture. If you want to get the passing score from the first attempt, you should also get familiar with radio management design and applying proper design management tools for different types of wireless networks. Another sub-topic included here handles wireless bridging and high-density wireless network design.

The final topic makes one proficient in WLAN high availability. They will learn about high availability design for controllers, Stateful Switchover, Network Availability through LAG, as well as priority and redundancy anchor controller. Besides, the candidates will know how to design high availability networks suitable for APS. In this sub-topic, they will handle AP prioritization and fallback concepts.

 

NEW QUESTION 31
Which UDP port numbers are used for exchange mobility packets in an AireOS wireless deployment?

• A. UDP 16666 for control plane, EoIP (IP protocol 97) for data plane
• B. UDP 16668 for control plane, UDP 16667 for data plane
• C. UDP 16666 for control plane, UDP 16667 for data plane
• D. UDP 16667 for control plane, UDP 16666 for data plane

Answer: C

 

NEW QUESTION 32
A wireless engineer is designing a wireless network for a warehouse using access points with internal antennas. Which two elements have a negative effect on the wireless users? (Choose two.)

• A. access point height
• B. wireless channels
• C. absorption
• D. client authorization
• E. client authentication

Answer: A,C

Explanation:
https://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1250-series/design_guide_c07-693245.html#_Toc309331086

 

NEW QUESTION 33
A wireless deployment in a high-density environment is being used by vendors to process credit card payment transactions via handheld mobile scanners. The scanners are having problems roaming between access points in the environment. Which feature on the wireless controller should have been incorporated in the design?

• A. 802.11w
• B. RX SOP
• C. Application Visibility Control
• D. AP Heartbeat Timeout

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/configguide/b_cg85/advanced_wireless_tuning.html

 

NEW QUESTION 34
A network administrator of a global organization is collapsing all controllers to a single cluster located in central Europe. Which concern must be addressed?

• A. Centralized controllers cannot uniformly authenticate global users.
• B. Some channels may not be available consistently across the organization.
• C. Different RF policies per office are not available in this configuration.
• D. Syslog must be configured to the time-zone of the NMS platform.

Answer: D

Explanation:
Section: Wired and Wireless Infrastructure

 

NEW QUESTION 35
Clustering Cisco WLCs into a single RF group enables the RRM algorithms to scale beyond the capabilities of a single Cisco WLC. How many WLC and APs in an RF group can the controller software scale up to in WLC release 8.9 depending on the platform?

• A. up to 20 WLCs and 4000 APs
• B. up to 20 WLCs and 1000 APs
• C. up to 20 WLCs and 3000 APs
• D. up to 20 WLCs and 6000 APs

Answer: D

 

NEW QUESTION 36
Which two criteria must be considered when conducting an outdoor bridge site survey? (Choose two.)

• A. near-far effect
• B. Fresnel zone
• C. power lines
• D. weather
• E. traffic lights

Answer: A,C

Explanation:
Section: Wireless Site Survey

 

NEW QUESTION 37
A high-density wireless network is designed. Which Cisco WLC configuration setting must be incorporated in the design to encourage clients to use the 5 GHz spectrum?

• A. RRM
• B. Cisco Centralized Key Management
• C. load balancing
• D. Band Select

Answer: D

Explanation:

 

NEW QUESTION 38
An engineer must create data link redundancy for the company's Cisco Wireless LAN controller. The engineer has decided to configure LAG-based redundancy instead of port-based redundancy. Which three features of LAG-based redundancy influenced this decision? (Choose three.)

• A. All interface traffic passes as long as one port is up.
• B. Packets are always sent out on the same port they are received on.
• C. Interface connection to two separate nonstacked switches is available.
• D. The same port has multiple untagged dynamic interfaces.
• E. Full bandwidth of all links is available.
• F. Ports are grouped into multiple LAGs.

Answer: A,B,F

Explanation:
https://community.cisco.com/t5/wireless-mobility-documents/lag-link-aggregation/ta-p/3128669

 

NEW QUESTION 39
A wireless engineer is performing a post verification of a wireless network. Which two metrics does the engineer verify to ensure that the wireless network can support voice services? (Choose two.)

• A. The coverage area must have a noise floor that does not exceed -87 dBm.
• B. The rate of retransmitted packets must be 20 percent or below.
• C. The client device must have at least an -67 dBm RSSI.
• D. The rate of retransmitted packets must be 15 percent or below.
• E. The client device must have at least an -65 dBm RSSI.

Answer: B,C

Explanation:

 

NEW QUESTION 40
What causes the most signal attenuation, based on the wireless design tools?

• A. glass wall
• B. cinder block wall
• C. metal door
• D. office window

Answer: C

Explanation:

 

NEW QUESTION 41
How does AP failover priority for access points function when configured with priority 1 or 4?

• A. When configured with priority 1, the access point is assigned with the medium priority level and it is marked as medium. This access point fails over after other access points with the higher priority when there is primary controller failure.
• B. When configured with priority 1, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over before other access points with the lower priority when there is primary controller failure.
• C. When configured with priority 4, the access point is assigned with the lowest priority level and it is marked as low. This access point fails over after other access points with the higher priority when there is primary controller failure.
• D. When configured with priority 4, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over before other access points with the lower priority when there is primary controller failure.

Answer: D

 

NEW QUESTION 42
Which Cisco VPN technology can use multipoint tunnel, resulting in a single GRE tunnel interface on the hub, to support multiple connections from multiple spoke devices?

• A. DMVPN
• B. Cisco Easy VPN
• C. GETVPN
• D. FlexVPN

Answer: A

 

NEW QUESTION 43

Refer to the exhibit. During a post Mesh deployment survey, an engineer notices that frame collisions occur when MAP-1 and MAP-3 talk to RAP-2 Which type of issue does the engineer need to address in the design?

• A. exposed node
• B. hidden node
• C. backhaul latency
• D. co-channel interference

Answer: B

Explanation:
Explanation
https://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/emob30dg/WiMesh.pdf

 

NEW QUESTION 44
Refer to the exhibit.

What is the main reason why the Wi-Fi design engineer took a different approach than installing the APs in the offices, even though that installation provides better coverage?

• A. antenna gain
• B. transmit power considerations
• C. aesthetics
• D. power supply considerations

Answer: B

Explanation:
Explanation
https://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/emob30dg/RFDesign.html#wp1000551

 

NEW QUESTION 45
Refer to the exhibit.

Which two statements about Cisco Prime Infrastructure are true? (Choose two.)

• A. It shows the planning mode feature in Cisco Prime Infrastructure.
• B. Controllers must be synchronized with Cisco Prime Infrastructure for planning mode to work.
• C. It shows the map editor feature in Cisco Prime Infrastructure.
• D. It presents the recommended number of APs for the selected coverage area based on the selections made.
• E. Planning mode requires a special license in Cisco Prime Infrastructure.

Answer: A,B

Explanation:

 

NEW QUESTION 46
A university is in the process of designing a wireless network in an auditorium that seats 500 students and supports student laptops. Which design methodology should the university implement in the auditorium?

• A. voice design model
• B. roaming design model
• C. high-density design model
• D. location design model

Answer: C

Explanation:
Explanation
https://www.cisco.com/c/dam/en_us/solutions/industries/docs/education/cisco_wlan_design_guide.pdf

 

NEW QUESTION 47
......

Topics of Cisco 300-425 Exam

To pass the Cisco 300-425 exam, the professionals must possess the necessary knowledge and skills, which help them cover all the questions presented in the overall content. The subject areas that will be measured in the delivery of this test include site surveys, wireless and wired infrastructure, WLAN high availability, and mobility. Let’s have a closer look at these topics and find out their objectives.

 

Cisco 300-425 Pre-Exam Practice Tests | TestSimulate: https://www.testsimulate.com/300-425-study-materials.html