2023 Verified NCP-US dumps Q&As on your Nutanix Certified Professional (NCP) Exam Questions Certain Success!

NCP-US Exam Dumps - 100% Marks In NCP-US Exam!

Nutanix NCP-US (Nutanix Certified Professional - Unified Storage) certification exam is designed for IT professionals who specialize in implementing and managing Nutanix unified storage solutions. Nutanix Certified Professional – Unified Storage (NCP-US) v6 exam certification exam validates the knowledge and skills required to configure, administer, and troubleshoot Nutanix storage clusters.

The NCP-US certification exam is a vendor-neutral certification that validates the skillset of professionals in managing Nutanix storage. NCP-US exam is highly recommended for IT professionals who work with Nutanix storage in their daily operations. Nutanix Certified Professional – Unified Storage (NCP-US) v6 exam certification provides a competitive edge to the professionals and helps them to stand out in the job market.

 

NEW QUESTION # 31
Where should an administrator look to see which user is the most active within a Files implementation?

• A. File Analytics Events
• B. Prism Central Files
• C. File Analytics Dashboard
• D. Prism Central Analysis

Answer: A

Explanation:
File Analytics Events provides a searchable audit trail of all file operations performed by each user1. You can filter by user name, event type, file path, time range, etc.
https://next.nutanix.com/education-blog-153/your-complete-guide-to-nutanix-files-training-resources-40087

NEW QUESTION # 32
A company has a number of thin clients which need to boot over the network. The company is using Volumes for this project.
Which component is needed to meet this requirement? (Choose two.)

• A. A compatible Ethernet adapter per client
• B. A DHCP server pointing to the Nutanix cluster.
• C. A client with MPIO access to the VG
• D. VM-attached VG with client iSCSI Initiator.

Answer: A,B

Explanation:
According to the Boot Over ISCSI article1, to boot an operating system over iSCSI for physical servers using Nutanix Volumes, you need to configure the network adapter BIOS settings to enable this feature1. You also need a DHCP server pointing to the Nutanix cluster that provides the iSCSI LUN1.
Based on this information, the components that are needed to meet this requirement are A. A compatible Ethernet adapter per client and C. A DHCP server pointing to the Nutanix cluster.

NEW QUESTION # 33
While preparing for migrating data from a legacy storage environment to a new Files scale-out file server, the administrator make the following notes:
Requirements:
Number of home directories: 4000
Number of Departmental shares: 1
Everyone is permitted to accessing it
All users use the same Departmental share
The administrator deploys Files using the following configuration:
Number of FSVMs: 3
VCPU & RAM/FSVM: 4VCPU,12GB
One Distributed share with SSR & ABE enabled for the Home Directories
One Standard share for the Departmental share
Does this configuration satisfy the project's requirements?

• A. No, the project needs two distributed 4 FSVMs, 24 vcpu & 128GB RAM
• B. No, the project needs two distributed Share 4 FSVMs. 6 vCPU & 326B RAM
• C. Yes, the listed configuration elements satisfy the requirements.
• D. No, the project needs 4 FSVMs 4 vCPU & 12GB RAM.

Answer: C

Explanation:
According to the scenario, the administrator is preparing to migrate data from a legacy storage environment to a new Files scale-out file server in a way that meets the following requirements:
Number of home directories: 4000
Number of Departmental shares: 1
Everyone is permitted to access it
All users use the same Departmental share
The administrator deploys Files using the following configuration:
Number of FSVMs: 3
VCPU & RAM/FSVM: 4VCPU, 12GB
One Distributed share with SSR & ABE enabled for the Home Directories
One Standard share for the Departmental share
Based on this configuration, it appears that the project's requirements are satisfied. The configuration provides a Distributed share for the home directories, which is recommended when there is a large number of files or directories, and this will distribute the load across multiple FSVMs. Note that everyone is permitted to access it.
In addition, the configuration provides a Standard share for the Departmental share, and since all users use the same Departmental share, this will not create any performance issues. Therefore, the correct answer is B, 'Yes, the listed configuration elements satisfy the requirements'.

NEW QUESTION # 34
A two-VM Oracle RAC cluster was recently configured with Linux Red Hat using a Nutanix Volume Group. At the time Of performing the failover tests Of simulating a failure in each Of the three Nutanix cluster nodes, the cluster administrator noticed that tile virtual machines Of the RAC cluster do not come up and the failover fails.
The administrator must to follow the best practices from Nutanix to construct the RAC cluster using AHV.
What should the administrator Veri'/ in the Steps performed to configure the RAC cluster to prevent this situation from occurring again?

• A. In the step for attach the volume group to the RAC VMs, he must create it with an attribute of shared = true
• B. VM-host affinity rules Can be Set up for RAC VMS to define where they Can run within the cluster
• C. use Antiaffinity rules to prevent multiple Oracle RAC nodes in the same RAC cluster from running on same Nutanix node
• D. Change the disk timeout to 60 (default 30) in the disk parameters for each linux device

Answer: A

Explanation:
https://www.nutanix.com/architecture
Nutanix volume groups are collections of vDisks that can be exposed to virtual machines or physical hosts using iSCSI protocol. Nutanix volume groups have a shared attribute that allows multiple VMs to access them concurrently.
In the step for attach the volume group to the RAC VMs, he must create it with an attribute of shared = true. This is because if the volume group is not created with shared = true, then only one VM can access it at a time, which would prevent Oracle RAC from working properly.

NEW QUESTION # 35
An administrator is determining the most recent operation a user performed on the share cifs1 within the last 24 hours.
How should the administrator complete this task in File Analytics?

• A. In the Anomalies section view the anomaly rule created for the user with an interval of 24 hours.
• B. In the Audit Trails section, search for the user and view their last operations.
• C. In the Anomalis section. select Users exceed an operation count threshold an input the 24 hour range for share cifs1.
• D. In the Audit Trails section, search for the cifs1 share and view the actions on the share over the past 24-hour range.

Answer: D

Explanation:
File Analytics is a tool used for monitoring and auditing file activity within an organization's file servers. The administrator needs to determine the most recent operation a user performed on the share cifs1 within the last 24 hours. To accomplish this task in File Analytics, the administrator should go to the Audit Trails section, where they can search for the cifs1 share and view the actions on the share over the past 24-hour range. This will allow the administrator to see all the activity that has occurred on the share, including the most recent operation performed by the user.
According to the Nutanix Unified Storage v6 documents at nutanix.com1, File Analytics captures all file activity for registered file server instances and provides an audit trail for administrators2. In the Audit Trails section, you can search for the user or the share name and view their operations over a specified time range2. This would allow you to determine the most recent operation a user performed on the share cifs1 within the last 24 hours.

NEW QUESTION # 36
Refer the exhibit.

An administrator is experiencing the following Objects failure error message:
IAM Service is not healthy.
The Object Store Domain entries appear grayed out in the user Interface, as shown in the exhibit.
Which commands should the administrator execute to identify the failure source?

• A. mspctl_cluster_list
  mspctl_status -u <UUID- UUID - UUID - UUID >
• B. mspcli_cluster_object
  mspcli_status -u <UUID- UUID - UUID - UUID >
• C. mspcli_cluster_list
  mspcli_status -u <UUID- UUID - UUID - UUID >
• D. mspctl_cluster_object
  mspctl_status -u <UUID- UUID - UUID - UUID >

Answer: C

Explanation:
The mspcli_cluster_list command lists all the existing service domains for the cluster, which can help identify if there is an issue with the Object Store Domain entries. The mspcli_status command can be used to get detailed status information on the specified service domain specified by the <UUID- UUID - UUID - UUID > parameter.

NEW QUESTION # 37
Due to a new IP addressing plan for the vDesktops network, an administrator needs to change the Files client-side network.
Which action should the administrator perform first?

• A. Create a new' managed virtual network.
• B. Remove existing DNS entries.
• C. Power off the FSVMs.
• D. Stop the Files service,

Answer: A

Explanation:
According to the Nutanix Unified Storage v6 documents at nutanix.com1, Files uses two types of networks: client-side and server-side2. The client-side network is used for SMB and NFS access to Files shares, while the server-side network is used for internal communication between FSVMs3. To change the client-side network, you need to create a new managed virtual network on Prism Element and assign it to your FSVMs4. This will allow you to change the IP addresses of your FSVMs without affecting their connectivity to each other.

NEW QUESTION # 38
Which setting should the administrator apply to a newly-created Objects bucket to ensure the requirements are met?

• A. Configure a Lifecycle Policy to overwrite one-year old data in the bucket.
• B. Configure the bucket WORM policy with a one-year retention,
• C. Apply a bucket Lifecycle Policy with a one-year expiration.
• D. Apply an Object versioning policy with one-year retention.

Answer: B

NEW QUESTION # 39
During a recent audit, the auditors discovered several shares that were unencrypted. To remediate the audit item, the administrator enabled Encrypt SMB3 Messages on the accounting, finance, and facilities shares. After encryption was enabled, several users have reported that they are no longer able to access the shares.
What is causing this issue?

• A. Advanced Encryption Standard 128 & 256 are disabled in Windows 7.
• B. The users are accessing the shares from Windows 8 desktops.
• C. The users are accessing the shares from Linux desktops.
• D. Advanced Encryption Standard 128 & 256 are disabled in Linux or Mac OS.

Answer: C

Explanation:
According to Encryption-Files | Nutanix Community1, SMB3 message encryption is a feature that encrypts messages on the file server side and decrypts them on the client side. However, clients that do not support encryption (Linux, Mac, windows 7) cannot access a share with encryption enabled.
According to Nutanix Support & Insights2, Nutanix Files supports SMB3 encryption for SMB3 client-server traffic. This means that only clients that support SMB3 protocol can access encrypted shares.
Therefore, if the users are accessing the shares from Linux desktops, they will not be able to access them because Linux does not support SMB3 encryption.
https://portal.nutanix.com/page/documents/solutions/details?targetId=NVD-2151-Unified-Storage:client-server-traffic-encryption.html

NEW QUESTION # 40
When deploying Nutanix unified Storage Objects. which two protocols are supported? (Choose two.)

• A. SMBv2
• B. SMBv3
• C. S3
• D. NFS

Answer: A,C

Explanation:
S3 stands for simple storage service and it is a widely used object storage protocol that allows you to store and retrieve any amount of data from anywhere on the web. SMBv2 stands for server message block version 2 and it is a file sharing protocol that enables access to files on remote servers. Nutanix Unified Storage Objects supports both S3 and SMBv2 protocols for data access.
https://next.nutanix.com/installation-configuration-23/ports-and-protocols-reference-chart-40249

NEW QUESTION # 41
Which administrator action within Files will enable the monitoring of users' files for malware and viruses?

• A. Connect to an ICAP server.
• B. Install antivirus on a server and mount the share for scan.
• C. Install ClamAV on each FSVM,
• D. Leave the threat detection to the local machine's antivirus application.

Answer: A

Explanation:
ICAP stands for internet content adaption protocol and it is a standard protocol that allows you to integrate file servers with security products. Nutanix Files supports third-party vendors that use ICAP servers to scan files for malware and viruses.
https://www.nutanix.com/sg/support-services/training-certification/certifications/certification-details-nutanix-certified-professional-unified-storage-v6

NEW QUESTION # 42
An administrator needs to audit and analyze the operations and contents of a file server.
Which File software tool should the administrator use to fulfill this task?

• A. Audit Dashboard
• B. Health Dashboard
• C. Analysis Dashboard
• D. Files Analytics Dashboard

Answer: D

Explanation:
Files Analytics Dashboard is one of these tools that enables administrators to audit and analyze the operations and contents of a file server. The Files Analytics Dashboard provides insights into user activity, file access patterns, data growth trends, data distribution across tiers and clouds, data protection status and more.
https://next.nutanix.com/files-storage-71/nutanix-files-documentation-37921

NEW QUESTION # 43
An administrator has mapped a Volume Group named VGI to a VM, Due to changes in the application running inside the VM, two additional volumes are required. At the time of creation, the VM was assigned to a Protection Domain named PDI.
Which two steps should the administrator take to add the additional volumes to the VM while maintaining data protection? (Choose two.)

• A. Add two additional vDisks to VG1.
• B. Manually update PD1 to include the newly created vDisks.
• C. Map the new vDisks as volumes to the VM.
• D. Add the new vDisks to the same Consistency Group.

Answer: A,D

Explanation:
To add additional volumes to a VM that is mapped to a VG, you need to add more vDisks to that VG1. vDisks are virtual disks that reside on Storage Containers2.
To maintain data protection for a VM that is assigned to a Protection Domain (PD), you need to add any new vDisks to the same Consistency Group (CG) as the existing ones3. A CG is a subset of entities in a PD that are snapshotted in a crash-consistent manner2.

NEW QUESTION # 44
A corporate compliance team has asked an administrator to stop using default passwords in the environment. The administrator needs to update the password used on the FSVM.
In which order should the administrator change the FSVM's default password?
Task Step
Step 1
Step 2
step 3
Step 4
Select
Log onto a file server VM via SSH
Change the password
Respond to the prompts, providing the current and new Nutanix user password Repeat the steps on the remaining FSVMs A company decided to switch their existing Windows file server to a new Files instance. After successfully deploying Files. an administrator now needs to plan to reduce the impact of any potential outage. As the source file server resides across the WAN from the destination file server over an unreliable network connection.
The administrator needs to ensure there is minimal impact to data already copied, should a network outage occur.
How should the administrator meet this requirement?

• A. use Microsoft DFS-R to replicate the files.
• B. use rsync in incremental copy mode.
• C. Check where the data cog failed and restart from that location.
• D. use a method allowing files to be copied in restartable mode.

Answer: D

Explanation:
Task Step Step 1 Step 2 step 3 Step 4 Select Log onto a file server VM via SSH Change the password Respond to the prompts, providing the current and new Nutanix user password Repeat the steps on the remaining FSVMs

NEW QUESTION # 45
An administrator is migrating a legacy iSCSI solution to Volumes and needs to reconfigure the iSCSI initiator in the Windows client devices.
What should the administrator understand about the client-side iSCSI configuration?

• A. The Enable mufti-path option should be unchecked.
• B. IP addresses of all FSVMs should be entered.
• C. IP addresses of all CVMs should be entered.
• D. The Nutanix MPIO drivers should be installed.

Answer: B

Explanation:
IP addresses of all FSVMs should be entered. FSVMs are File Server Virtual Machines that provide iSCSI services for Nutanix Volumes. The iSCSI initiator in Windows client devices should be configured with the IP addresses of all FSVMs in a cluster to enable load balancing and failover. The Enable multi-path option should be checked to use multiple paths for iSCSI traffic. The Nutanix MPIO drivers are not required for Windows clients as they can use native MPIO drivers.
https://next.nutanix.com/how-it-works-22/nutanix-volumes-recommendations-and-best-practices-38585

NEW QUESTION # 46
......

Nutanix NCP-US certification exam is a highly recognized industry certification that validates an individual's expertise in unified storage solutions. Nutanix Certified Professional – Unified Storage (NCP-US) v6 exam certification exam is designed for professionals who want to demonstrate their proficiency in deploying and managing Nutanix storage solutions. NCP-US exam measures the candidate's knowledge of Nutanix storage architecture, administration, and data protection.

 

Pass Your NCP-US Exam Easily With 100% Exam Passing Guarantee: https://www.testsimulate.com/NCP-US-study-materials.html