Free HPE0-S59 Exam Files Downloaded Instantly UPDATED [2024]

100% Pass Guaranteed Free HPE0-S59 Exam Dumps

HPE0-S59 exam is an essential certification test for IT professionals who want to demonstrate their expertise in HPE Compute Solutions. HPE0-S59 exam is designed to assess the candidate's understanding of various HPE compute solutions, including HPE ProLiant, HPE Synergy, and HPE BladeSystem. HPE Compute Solutions certification is intended for IT experts who work with HPE solutions and want to advance their skills and knowledge.

HP HPE0-S59 (HPE Compute Solutions) Certification Exam is a highly sought-after certification program that validates the skills and expertise of IT professionals in designing and implementing HPE compute solutions. HPE0-S59 exam is designed to test the technical knowledge and skills required to design, deploy, and manage HPE compute solutions in complex enterprise environments. HPE Compute Solutions certification is ideal for IT professionals who want to enhance their career prospects and take their skills to the next level.

 

NEW QUESTION # 23
An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login prompt displays Where should you start the troubleshooting process?

• A. At the iLO interface to verify whether the ILO Advanced license is properly applied
• B. At HPE OneView Interface to verify whether the server is In the maintenance mode
• C. At HPE OneView Interface to verify whether the iLO processor is disabled
• D. At the iLO interface to verify whether the SSO certificate is removed from an iLO.

Answer: A

NEW QUESTION # 24
Which statement about a new HPE SimpliVity deployment is true?

• A. All new HPE SimpliVity models support deduplication and compression
• B. New HPE SimpliVity deployments give customer flexible choice of hypervisor
• C. New HPE SimpliVity deployments are licensed per node not per physical socket
• D. All new HPE SimpliVity models are based on AMD CPUs

Answer: A

NEW QUESTION # 25
Your customer plans to use HPE Primera to boot HPE Synergy compute nodes. They currently have two HPE Virtual Connect SE 100Gb F32 Module for Synergy modules installed in the frame. The customer wants to use FC as a storage access protocol What must be done to complete this task?

• A. Enable FC primary and secondary boot on the modules through the HPE OneView interface
• B. Add FC upgrade licenses in HPE OneView that will enable FC connectivity for the modules
• C. FC connectivity on the modules should be enabled through the service console by disabling FCoE.
• D. Enter both modules into a maintenance mode, then enable FC connectivity through CLI

Answer: C

NEW QUESTION # 26
Your customer plans to add four HPE Synergy frames to an existing management ring Ail installed frames are equipped with two 2-port FLM modules, while new frames will be equipped with 4-port FLM modules.
Which statement about mixing different FLM modules is true?

• A. Mixing different FLM modules is allowed if all of them have the same firmware version
• B. Existing 2-port FLM modules must be replaced with 4-port FLM modules
• C. A management ring can contain mixed frame link module configurations
• D. A management ring with mixed FLM modules cannot have more than 12 frames

Answer: D

NEW QUESTION # 27
Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.
Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?

• A. HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server
• B. Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor
• C. HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality
• D. Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities

Answer: C

NEW QUESTION # 28
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.

Answer:

Explanation:

NEW QUESTION # 29
Which statement about login redistribution is true?

• A. Login redistribution is supported only on the HPE Synergy Virtual Connect SE 32Gb FC Modules
• B. Login redistribution is available only If HPE Primera or HPE Alletra is connected directly to the HPE Synergy frame
• C. Login redistribution is a licensed feature and the number of licenses required depends on the number of active ports
• D. Login redistribution is used for login balancing when they are not distributed evenly over the FC links

Answer: A

NEW QUESTION # 30
Your customer added a new Ethernet network in HPE Oneview mat is used to manage their HPE Synergy platform.
When the customer tries to connect one of the compute nodes to this network through the server profile, this network is not available.
What must be done to fix this issue?

• A. To make this network available to use in the server profile, the customer must enable the Smart Link feature within network definition.
• B. The newly created network must be added to the uplink set within the LIG, and Logical interconnect configuration must be updated from the LIG.
• C. Check within the server profile which server hardware is used and perform the Refresh operation on this compute node to get the latest adapter information.
• D. Check the Logical Enclosure settings and verify if the maximum number of networks allowed for this LE is reached.

Answer: B

NEW QUESTION # 31
Your customer plans to setup an HPE Synergy solution based on SY480 Gen10 compute nodes with the following connectivity options - SAS connectivity installed in the first fabric - FC connectivity Installed In the second fabric - Ethernet connectivity installed in the third fabric.
Which statement regarding this setup is true?

• A. Interconnect modules that provide SAS connectivity should be moved to the third fabric
• B. Each interconnect module in each fabric must be properly licensed in HPE OneView
• C. Compute nodes must have a second CPU installed to access the second fabric.
• D. Each compute node must have at least 768GB of memory installed

Answer: D

NEW QUESTION # 32
What is a restriction of using a RoCE network?

• A. It does not support Private VLAN and Multicast VLAN.
• B. it is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.
• C. It does not support smart link and private network features.
• D. It is by default configured as an untagged network and cannot be a part of a network set.

Answer: D

NEW QUESTION # 33
What is one of me benefits of using HPE Composer 2?

• A. HPE Composer 2 modules are required to manage HPE virtual Connect SE 100GD F32 Modules for Synergy
• B. The administrator can access an HPE Synergy Composer 2 appliance remotely to perform First Time Setup
• C. A pair of HPE Composer 2 modules can manage 42 frames, compared to 21 frames managed by HPE Composer
• D. HPE Composer 2 has 128GB of memory and 4 AMD CPUs to improve performance of me management system

Answer: D

NEW QUESTION # 34
Your customer wants to add dedicated Fibre Channel connectivity to the HPE Synergy frame running HPE Synergy 480 Gen10 compute modules, each with one CPU socket populated Currently they use two 12 Gb SAS switches and two HPE Virtual Connect SE 100Gb F32 Modules for HPE Synergy installed in third fabric.
What must be done to enable dedicated FC connectivity for this HPE Synergy frame?

• A. A second CPU must be installed for all HPE Synergy 480 Gen10 compute nodes.
• B. For Brocade switches, a logical interconnect group must be created in HPE OneView.
• C. For VC-FC modules, all of server facing ports must be property licensed.
• D. SAS switches must be moved to second fabric and FC modules Installed in the first one.

Answer: D

NEW QUESTION # 35
Match HPE SimpliVity team with the definition.

Answer:

Explanation:

NEW QUESTION # 36
You modified a logical interconnect group mat is used to configure logical interconnects in five different logical enclosures. What will be the impact of that change?

• A. All logical interconnects configured using this logical Interconnect group will report inconsistency
• B. All logical interconnects configured using this logical interconnect group will be automatically updated
• C. All physical interconnects from the affected logical interconnects must he rebooted to activate the new configuration
• D. All physical interconnects from affected logical interconnects will be placed in a maintenance mode

Answer: D

NEW QUESTION # 37
Your customer reports mat an external FC boot volume for Windows server is visible four times in the Disk Management 1 online and 3 offline.
What should you do to resolve this issue?

• A. Remove the offline disks using array management tools
• B. Disable deduplication for this volume at the array level
• C. Install and configure MPIO on me Windows system
• D. Remove the offline disks using Windows Disk Management

Answer: C

NEW QUESTION # 38
You configured a vVoI datastore using HPE Storage integration Pack for VMware vCenter.
Which storage object should you check using SSMC to verify whether vVol datastore is configured property?

• A. Storage Container
• B. virtual Volume
• C. Virtual Volume Set
• D. App Volume Set

Answer: C

NEW QUESTION # 39
Your customer has 6 logical enclosures spanning 18 HPE Synergy frames. The customer needs to add one more logical enclosure based on 5 HPE Synergy frames How will this change impact the customer environment?

• A. The customer can add a new logical enclosure to an existing setup once all required licenses are added lo HPE OneView and associated with the new frames.
• B. The customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.
• C. The customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.
• D. The customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.

Answer: B

NEW QUESTION # 40
An HPE Synergy customer needs to prevent a timeout and loss of communication during an external switch firmware upgrade.
Click the parameter that the customer should configure within an uplink set to meet this requirement

Answer:

Explanation:

NEW QUESTION # 41
Your customer is implementing an HPE Synergy solution based on three frames.
Click each of the ports that can be used to connect satellite modules.

Answer:

Explanation:

NEW QUESTION # 42
Match each HPE OneView network type with its definition.

Answer:

Explanation:

NEW QUESTION # 43
Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU sockets Which HPE compute system meets the customer requirements?

• A. HPE ProLiant DL580 Gen10
• B. HPE ProLiant OL380 Gen 10 Plus
• C. HPE Synergy 480 Gen10 Plus
• D. HPE Superdome Flex system

Answer: C

NEW QUESTION # 44
Which statement about the SY480 Gen10 Plus Compute Module is true?

• A. It supports "3rd Gen AMO EPYC Server Processors with 64 cores.
• B. It only supports NVDIMM Persistent Memory.
• C. It cannot be mixed with Gen9 compute modules in the same frame.
• D. It supports 8 memory channels and memory DIMMs of up to 256GB.

Answer: B

NEW QUESTION # 45
Which statement about the HPE D3940 storage module is true?

• A. SATA drives requires redundant 10 adapters to be installed in this module
• B. Up to five modules can be installed in a single frame with Gen10 servers
• C. Only one type of drives (SATA, SAS, SSD) can be installed in each module
• D. it is configured through CLl available from HPE Synergy console

Answer: D

NEW QUESTION # 46
......

To successfully pass the HP HPE0-S59 certification exam, candidates are required to have a strong understanding of HPE compute technologies, including HPE ProLiant Gen10, HPE BladeSystem, HPE Synergy, and HPE SimpliVity. They also need to be familiar with HPE compute solution design, deployment, management, and troubleshooting. HPE0-S59 exam consists of 60 multiple-choice questions and candidates are given 105 minutes to complete it. Upon passing the exam, candidates will receive the HP HPE0-S59 certification, which is a valuable asset for IT professionals seeking to advance their careers in the field of HPE compute solutions.

 

Latest HPE0-S59 dumps - Instant Download PDF: https://www.testsimulate.com/HPE0-S59-study-materials.html