1Z0-1045-20 Practice Oracle Verified Answers - Pass Your Exams For Sure! [2021]
Valid Way To Pass Oracle Warehouse Management Cloud's 1Z0-1045-20 Exam
NEW QUESTION 18
You are the inventory control superuser of a warehouse and need to audit all the cycle count activities done by the operators before they are communicated to the host system from WMS Cloud.
You are responsible for the cycle count functionality configuration of the warehouse as well. This warehouse was newly bought by your company.
Your company is a 3PL and this new warehouse will be used for a new client of your company. Which four tasks do you need to complete? (Choose four.)
- A. Create a Cycle Count RF screen with the parameter auto-approve-mode set to off.
- B. Set the company parameter INVN_ADJ_APPROVAL_REQUIRED to yes for your company.
- C. Set the facility parameter INVN_ADJ_APPROVAL_REQUIRED to yes for the new warehouse.
- D. Audit the Pending records in the Cycle Count Adjustment screen.
- E. Set the company parameter INVN_ADJ_APPROVAL_REQUIRED to yes for the company that you are configuring.
- F. Create a Cycle Count RF screen with the parameter auto-approve-mode set to on.
Answer: B,C,D,F
NEW QUESTION 19
Your warehouse is divided into two large areas, Area A and Area B, which store different products. You have set up your wave to allocate inventory from only Area A, but when the wave is run, both Area A and area B have allocated items.
What caused the issue?
- A. Allocation zone was not specified in the shipping order.
- B. In the Allocation Mode, "Restrict Allocation Zone" was set to Area B.
- C. In the Allocation Mode, "Restrict Allocation Zone" was not specified.
- D. Allocation zone was not specified in the task selection criteria.
- E. The locations in Area A have excessive cycle count tasks against them.
Answer: D
NEW QUESTION 20
Which two options are true if inventory is unallocated and unavailable? (Choose two.)
- A. Inventory located in a drop zone
- B. Inventory in locations with lock codes
- C. Inventory located in active location
- D. Unlocked inventory located in reserve location
Answer: B,D
NEW QUESTION 21
Your client wants to do flow-through allocations. Which two types of packing transactions achieve this flow?
(Choose two.)
- A. Distribution
- B. Packlpn
- C. Pick Cart
- D. PackNC
Answer: A,D
NEW QUESTION 22
Identify the type of functions you need to use to handle conditional information in a report.
- A. String Functions
- B. Dynamic Functions
- C. Arithmetic and Geometric Functions
- D. Logical Functions
- E. WMS BI Cloud does not support that type of functionality
Answer: D
NEW QUESTION 23
When the Ship Load interface is generated, which statement is false?
- A. The Wave is set to "Completed" status
- B. The Load is updated to "Shipped" status
- C. The Orders on the load are updated to "Shipped" status
- D. The shipping cartons (OBLPNs) assigned to the load are updated to "Shipped" status
Answer: C
NEW QUESTION 24
A client can integrate with WMS Cloud by using the input interface.
Which three options can be integrated? (Choose three.)
- A. Appointments
- B. Loads
- C. Item
- D. Orders
Answer: B,C,D
NEW QUESTION 25
A warehouse manager needs to view additional information not available in the existing Picking applications.
Identify two ways to fulfill this requirement. (Choose two.)
- A. Use a base WMS BI Cloud showing the needed information.
- B. Access data through SQL.
- C. Create a custom WMS BI Cloud showing the information.
- D. Modify the base application to display additional information.
Answer: C,D
NEW QUESTION 26
Why is it necessary to have a consolidation location?
- A. After you are finished picking your pick cart, you use a consolidation location to pack.
- B. Packing using a Distribution transaction requires a consolidation location for each store.
- C. Consolidation locations are used to consolidate orders for a wave.
- D. It is necessary if you want to consolidate while packing.
Answer: A
NEW QUESTION 27
A Purchase order created in ERP is downloaded to WMS Cloud.
Which two statements are correct related to the Purchase order update? (Choose two.)
- A. Purchase order can be re-created by sending the RE-CREATE action code when the status is In- Receiving.
- B. UPDATE is sent in the Header and CREATE in the Detail for an existing Purchase Order line. The application will add up the corresponding "Order Quantity".
- C. The RE-CREATE action code if sent for an existing PO, the same PO will be deleted and re-created with the new details.
- D. The Purchase order header can be updated by sending an UPDATE action code when the status is in Created and Received.
- E. UPDATE is sent both in the Header and Detail for an existing line. The application will just update the record at Details.
Answer: D,E
NEW QUESTION 28
Select two configurations required to fulfill a Cross Dock order. (Choose two.)
- A. Module Parameter should be enabled on the RF Receive Screen for receiving Cross Dock ASN
- B. Wave template should be configured to allocate Cross Dock Order
- C. IB Shipment Type should be defined for Cross Dock ASN
- D. The Cross Dock Outbound Order type should be defined
- E. The Replenishment template is required to replenish Cross Dock Order
Answer: C,E
NEW QUESTION 29
During which of the following three scenarios does the WMS validate or throw an error message during picking with a serial number tracking execution? (Choose three.)
- A. When the scanned serial number is present in the scanned IB LPN or active location and also exists for another item in stock in the current facility.
- B. When the scanned serial number is not present in the scanned IB LPN or Outbound LPN or item and is currently linked to another Inventory Record for the facility.
- C. When the same serial number, which is already present on the same Sku in a different facility, is scanned.
- D. When the scanned serial number, which is associated with an OBLPN in shipped status for a different facility, is not found for the current facility.
- E. When the scanned serial number is not present in the scanned IB LPN or Outbound LPN or item and is present for a different facility.
Answer: A,C,E
NEW QUESTION 30
You are the Inventory Control Supervisor at your employer's East Coast facility. Your employer is a 3PL, and your customer is a large company that is also serviced out of the other 3PL facilities. As you start the shift, your Inventory Control team members inform you of a significant change in the RF Cycle Counting process.
Lost IBLPNs are now updates with a "00" lock code rather than the expected "LL" code.
Which scenario is causing this issue?
- A. An inventory team member in the other facility marked a lost case with "00" lock code causing all subsequent lost cases to be defaulted to the same code across all LPNs for all company/facility combinations.
- B. Your counterpart at the 3PL's other facility changed one of the cycle counting company parameters and that impacted your workflow for that same company.
- C. You dismiss the concern because a change in the lock code has no impact on either the WMS Cloud or host inventories.
- D. One of your inventory team members changed his/her RF parameter default lock code causing the same configuration change to propagate to all users in the facility.
- E. While counting LPNs at a location, one of your team members marked a lost case with the new lock code.
The new lock code is stored in system memory and applied to all IBLPNs counted as "Lost".
Answer: E
NEW QUESTION 31
Identify two correct statements about ASN creation. (Choose two.)
- A. The ASN number can be system generated or manually entered.
- B. Oracle WMS Cloud only allows creation of a single ASN from a PO.
- C. Oracle WMS Cloud allows creation of a single/multiple ASN from a PO.
- D. The ASN number is always auto-generated from a sequence number.
Answer: A,C
NEW QUESTION 32
Which two packing transactions do not require you to open up an IB LPN (Everything will go in the box)?
(Choose two.)
- A. PackNC Transaction
- B. PackLPN Transaction
- C. Distribution Transaction
- D. Pick Cart Transaction
Answer: B,D
NEW QUESTION 33
Which two data conditions on the Outbound Order will always result in unsuccessful cross-dock allocations in WMS Cloud? (Choose two.)
- A. The quantity of the item on the Outbound Order is less than the quantity of the item on the LPM being received.
- B. The item on the Outbound Order is a batch tracked item.
- C. The quantity of the item on the Outbound Order is greater than the quantity of the item on the LPN being received.
- D. The quantity of the item on the Outbound Order is exactly equal to the quantity of the item on the LPN being received.
- E. The item on the Outbound Order does not match the item on the LPN being received.
Answer: A,E
NEW QUESTION 34
While working on the configuration of your client, you uncover that the ASNs will always have the correct serial number information interfaced upfront and your client trusts the ASN information. Your client also needs the serial number information to get into WMS Cloud when the items are received from POs.
Which three actions do you need to take, assuming that item A is serial-tracked? (Choose three.)
- A. Create the Serial Number barcode type.
- B. Create the IB Container barcode type.
- C. Set item A's require serial number parameter to "Required, don't Validate".
- D. Set item A's require serial number parameter to "Required, validate and allow user override".
- E. Set the company parameter SERIAL_NUMBER_TRACKING_LEVEL TO 2.
Answer: B,D,E
NEW QUESTION 35
You are performing the Split IB LPNs RF transaction and seeing an error message: Shipment Verification status mismatch.
Which three are valid? (Choose three.)
- A. This error message will disappear if the RF screen parameter split-uom is left bank.
- B. The from-IBLPN and the to-IBLPN might be received against two different ASNs respectively.
- C. The from-IBLPN and the to-IBLPN might be received against the same ASN.
- D. If the to-IBLPN is received via the Recv Shipment RF transaction, the from-IBLPN might be from the Create RF transaction.
- E. This error message will disappear if the RF screen parameter required-validations is set up as No Validation.
Answer: A,C,E
NEW QUESTION 36
Your customer is a Third Party Logistics operator (3PL) and ships multiple customer's orders from two centralized facilities, one on each coast of the country.
How do you set up the Facility, Company, and User hierarchy in the system (in sequential order)?
- A. Create the Parent 3PL Company, then the Facilities, next the Companies, next re-create each User in each facility he or she is eligible for work.
- B. Because of the distance between Facilities, you recommend two WMS Cloud instances for your customer.
- C. Create the Parent 3PL Company, then nested Locations Zones to represent the facilities and the customer Companies and finally add the Users.
- D. Create the 3PL's customer's Companies first, then the Users, next assign customers and Users to the Facilities, and finally create an Admin account for the 3PL in each facility.
- E. Create the Parent Company as the 3PL, then the two facilities, next the Users in the facilities, and the Companies that represent the customers, and the users to the companies.
Answer: E
NEW QUESTION 37
Which statement is true regarding Replenishment Rules?
- A. Replenishment Rules created at Parent company view can be edited at Child company view.
- B. Replenishment Rules are used for Inventory movement between two warehouses.
- C. Replenishment Rules are used for defining Wave Template.
- D. Replenishment Rules are only editable at the company level in which it was created.
Answer: C
NEW QUESTION 38
What is true about emailing a scheduled report?
- A. The person receiving the email must have an email registered with a username in the system
- B. You can email reports in HTML format
- C. You can add an additional filter for a specific scheduled report
- D. You cannot customize the subject of the email
Answer: C
NEW QUESTION 39
Your company has two facilities, one in California, and the other in New Jersey.
The California facility needs to exclusively check the quality of each item on receiving whereas the New Jersey one need to exclusively perform Value-Added Service (VAS) on each unit during receiving and shipping.
Identify the Location Types that are required to be defined in the Oracle WMS Cloud to receive the items at the California Facility.
- A. Active and VAS
- B. Reserve and QC
- C. Reserve and VAS
- D. Active and Reserve
Answer: D
NEW QUESTION 40
As an Inventory Super User, you are configuring LPNs per tier and Tiers per Pallet fields at Item Details screen.
Which statement is true about LPNs per tier and Tiers per Pallet?
- A. LPNs per tier and Tier per Pallet are used to define the standard number of LPNs acceptable per pallet during receiving.
- B. LPNs per tier and Tiers per Pallet are used to define number of Ob LPN per tier during shipping.
- C. LPNs per tier and Tiers per pallet are used to define the standard number of case and pack for an Item during receiving.
- D. LPNs per tier and Tiers per Pallet are used to define number of IB LPN per tier during receiving.
Answer: C
NEW QUESTION 41
......
Oracle 1Z0-1045-20 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
| Topic 13 |
|
Oracle 1Z0-1045-20 Pre-Exam Practice Tests | TestSimulate: https://www.testsimulate.com/1Z0-1045-20-study-materials.html