[Q173-Q195] Get 100% Passing Success With True 300-415 Exam! [Oct-2025]

Get 100% Passing Success With True 300-415 Exam! [Oct-2025]

Cisco 300-415 PDF Questions - Exceptional Practice To Implementing Cisco SD-WAN Solutions

Upon passing the Cisco 300-415 exam, candidates will receive a Cisco Certified Specialist – SD-WAN Implementation certification, which is a valuable asset for network engineers and administrators seeking to advance their careers. Implementing Cisco SD-WAN Solutions certification demonstrates that the candidate has the knowledge and skills required to implement and manage Cisco SD-WAN solutions and is recognized by employers worldwide.

What knowledge do you need to possess before taking the Cisco 300-415 exam?

There are no formal prerequisites for attempting the Cisco 300-415 exam. However, before registering for the test, you need to make sure that you have the appropriate knowledge to tackle the exam questions. These competencies include a good comprehension of enterprise-wide area network design, understanding of Software-Defined Networking concepts with the reference to large-scale live network deployments, awareness of IP Security (IPSec) and Transport Layer Security (TLS), as well as knowledge of interior and exterior routing protocol operations. The completion of the Implementing Cisco SD-WAN Solutions (SDWAN300) course will be an added advantage. It is also recommended that the candidates have at least three years of working experience in implementing enterprise networking solutions.

NEW QUESTION # 173
Drag and drop the devices from the left onto the correct functions on the right.

Answer:

Explanation:

NEW QUESTION # 174
Refer to the exhibit.

Refer to the exhibit. vManage logs are available for the past few months. A device name change deployed mistakenly at a critical site. How is the device name change tracked by operation and design teams?

Answer: B

NEW QUESTION # 175
Which template configures the out-of-band management VPN?

Answer: A

NEW QUESTION # 176
Drag and drop the BFD parameters from the left onto the BFD configurations on the right.

Answer:

Explanation:

Explanation:

https://sdwandocs.cisco.com/Product_Documentation/vManage_Help/Release_18.2/Configuration/Templates/BF

NEW QUESTION # 177
Drag and drop the route verification output from show omp tlocs from the left onto the correct explanations on the right.

Answer:

Explanation:

NEW QUESTION # 178
What is a restriction when configuring a tunnel interface?

A. Up to six tunnel interfaces are configurable on a WAN Edge.
B. It must be configured for the interface under all VPNs.
C. It is manually assigned when using vManage feature templates.
D. Up to six tunnel interfaces are configurable on a vSmart.

Answer: C

NEW QUESTION # 179
In which device state does the WAN edge router create control connections, but data tunnels are not created?

A. active
B. staging
C. valid
D. backup

Answer: B

Explanation:

NEW QUESTION # 180
Which feature template configures OMP?

Answer: D

NEW QUESTION # 181
Which policy allows communication between TLOCs of data centers and spokes and blocks communication between spokes?

A. localized control policy
B. centralized control policy
C. centralized data policy
D. localized data policy

Answer: B

Explanation:
We created a CENTRALIZED POLICY using the vManage GUI. In this policy, we have created another CONTROL POLICY that matches the hub TLOCs and accepts them, all other TLOCs are rejected by the default action at the end - Reject.

NEW QUESTION # 182
Which two algorithms authenticate a user when configuring SNMPv3 monitoring on a WAN Edge router? (Choose two.)

A. MD5
B. SHA-1
C. SHA-2
D. AES-128
E. AES-256

Answer: B,E

Explanation:

https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/snmp/snmp-book.html

NEW QUESTION # 183
Which attributes are configured to uniquely identify and represent a TLOC route?

A. firewall, IPS, and application optimization
B. site ID, tag, and VPN
C. system IP address, link color, and encapsulation
D. origin, originator, and preference

Answer: C

Explanation:
https://sdwan-
docs.cisco.com/Product_Documentation/Software_Features/Release_18.2/03Routing/01Unicast_ Overlay_Routing_Overview#TLOC_Routes

NEW QUESTION # 184
Company ABC has decided to deploy the controllers using the On-Prem method. How does the administrator upload the WAN Edge list to the vManage?

Answer: A

Explanation:
https://sdwan-docs.cisco.com/Product
Documentation/vManageHelp/Release18.3/Configuration/Devices

NEW QUESTION # 185
In which device state does the WAN edge router create control connections, but data tunnels are not created?

A. active
B. staging
C. valid
D. backup

Answer: B

Explanation:

NEW QUESTION # 186

Refer to the exhibit. The network administrator has configured a centralized topology policy that results in the displayed routing table at a branch office. Which two configurations are verified by the output? [Choose two.)

A. The configured policy is adding a route tag of 300 to learned routes.
B. The default route is configured locally.
C. This routing table is from a cEdge router.
D. The routing table is for the transport VPN.
E. The default route is learned via OMP.

Answer: C,E

NEW QUESTION # 187
A network administrator is tasked to make sure that an OMP peer session is closed after missing three consecutive keepalive messages in 3 minutes. Additionally, route updates must be sent every minute. If a WAN Edge router becomes unavailable, the peer must use last known information to forward packets for 12 hours. Which set of configuration commands accomplishes this task?

A. Option A
B. Option B
C. Option C
D. Option D

Answer: A

Explanation:
Explanation
https://sdwan-docs.cisco.com/Product_Documentation/vManage_Help/Release_17.2/Configuration/Templates/O

NEW QUESTION # 188
Drag and drop the policies from the left onto the correct policy types on the right.

Answer:

Explanation:

NEW QUESTION # 189
What are the two components of an application-aware firewall? (Choose two.)

A. sequence
B. firewall policy
C. lists
D. zone pair
E. sequence action
F. default action

Answer: A,F

Explanation:
An application-aware firewall in Cisco SD-WAN provides advanced security by allowing policies to be defined based on specific applications and their behaviors.
* Sequence: In the context of an application-aware firewall, a sequence defines the order in which firewall rules are evaluated. Each sequence can contain match conditions and corresponding actions to be taken if the conditions are met.
* Default Action: The default action is a crucial component that specifies what action to take if none of the defined sequences match the traffic. This ensures that there is always a fallback action to handle unmatched traffic, providing a safety net for security policies.

NEW QUESTION # 190
Which pathway under Monitor > Network > Select Device is used to verify service insertion configuration?

A. Real Time
B. Troubleshooting
C. Events
D. System Status

Answer: A

Explanation:
Reference:
https://www.ciscolive.com/c/dam/r/ciscolive/apjc/docs/2018/pdf/LABEN-2010-LG.pdf

NEW QUESTION # 191
Two sites have one WAN Edge each WAN Edge has two public TLOCs with no restrict configured. There is full reachability between the TLOCs. How many data tunnels are formed on each Edge router?

A. 0
B. 1
C. 2
D. 3

Answer: D

NEW QUESTION # 192
Refer to the exhibit. An engineer is troubleshooting a control connection issue on a WAN Edge device that shows socket errors. The packet capture shows some ICMP packets dropped between the two devices. Which action resolves the issue?

A. Recover the vManage controller that is down in a high availability cluster.
B. Recover vBond or wait for the controller to reload, which could be caused by a reset.
C. Change the system IP or restart the WAN Edge if the system IP is changed.
D. Remove IP duplication in the network and configure a unique IP address.

Answer: D

Explanation:
The exhibit displays the LISFD error, (Socket Errors), the most common cause for these errors are due to Duplicate transport IPs. (LISFD) = Socket Errors!
https://www.cisco.com/c/en/us/support/docs/routers/sd-wan/214509-troubleshoot-control- connections.html#toc-hId-1996362298

NEW QUESTION # 193
A network administrator is configuring an application-aware firewall between inside zones to an outside zone on a WAN edge router using vManage GUI. What kind of Inspection is performed when the ''inspect'' action is used?

A. Layer 7 inspection for TCP and Layer 4 inspection for UDP
B. IPS inspection for TCP and-Layer 4 inspection for UDP
C. stateful inspection for TCP and UDP
D. stateful inspection for TCP and stateless inspection of UDP

Answer: C

Explanation:

NEW QUESTION # 194
Refer to the exhibit.

An organization is testing a Cisco SD-WAN solution and decided to have the control plane established first and not the data plane at the time of migration. Which configuration achieves this goal?