Nutanix NCA-6.5 Dumps - 100% Cover Real Exam Questions (Updated 100 Questions)
Real NCA-6.5 dumps - Real Nutanix dumps PDF
Nutanix NCA-6.5 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
NEW QUESTION 32
Which Component Allows you to pair sites for disaster Recovery Policy Creation Using Nutanix Leap?
- A. Availability Zones
- B. Protection Domains
- C. Recovery Plans
- D. Protection Policies
Answer: A
NEW QUESTION 33
An administrator wants to have a single chart with the logical usage for three storage containers. Which action should the administrator perform?
- A. Create a new Entity Chart
- B. Create a new Metric Chart
- C. See Storage usage under Prism Element Health page
- D. See Usage Summary in the Storage Containers detailed view
Answer: A
Explanation:
An administrator can create an Entity Chart to view the logical usage for multiple storage containers in one chart. This chart can be created from the Prism Element dashboard, and it provides a visual representation of the logical usage of each container, allowing administrators to easily compare the usage of multiple containers at once.
NEW QUESTION 34
Refer to the exhibit.
An administrator needs to upgrade a VM to 10 virtual processors. Which action should the administrator take to complete this task?
- A. Update the VM adding two cores
- B. Power-off the VM and add one vCPU
- C. Update the VM adding two vCPUs
- D. Power-off the VM and add one core
Answer: A
NEW QUESTION 35
Refer to the exhibit.
What is true about the network uplink ports?
- A. All are connected, but only two are carrying traffic.
- B. One is connected at 1GbE and the other is 10GbE.
- C. They are configured in Active-Active mode.
- D. They are configured in Active-Backup mode.
Answer: A
Explanation:
In Nutanix, all the network uplink ports are connected, but only two of them are carrying traffic at any given time. This is done to provide redundancy and failover in case one of the ports fails. The two ports that are carrying traffic are chosen based on the link aggregation policy configured. The link aggregation policy can be configured to use either Active-Active or Active-Backup mode. In Active-Active mode, both ports are active and carrying traffic, while in Active-Backup mode, only one port is active and carrying traffic, the other port is on standby. Reference: https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_11:wc-network-configuring-uplink-ports_wc-network-configuring-uplink-ports.html
NEW QUESTION 36
Which technology allows applications and data to move freely between runtime environments?
- A. App Mobility Fabric
- B. Distributed Storage Fabric
- C. Nutanix Move
- D. Disaster Recovery
Answer: A
Explanation:
App Mobility Fabric is a technology from Nutanix that allows applications and data to move freely between runtime environments. It allows applications and data to be moved from one environment to another without any disruption or downtime. Reference: https://www.nutanix.com/products/app-mobility-fabric
NEW QUESTION 37
Assuming Sufficient Storage Capacity , how long are entities kept in the prism recycle bin?
- A. 1 month
- B. 24 hours
- C. 8 hours
- D. 1 week
Answer: B
NEW QUESTION 38
An administrator wants to evaluate the overall health of the Nutanix cluster. What should be the first step?
- A. Run Log Collector
- B. Run Xi Beam
- C. Run LCM
- D. Run NCC
Answer: D
NEW QUESTION 39
An administrator needs to provide data integrity at the application level for a VM that is replicated to a secondary site. Which requirement will satisfy this task?
- A. 1 VM per Schedule
- B. 1 VM per Availability Zone
- C. 1 VM per Protection Domain
- D. 1 VM per Consistency Group
Answer: A
NEW QUESTION 40
Which address allows external connections to Nutanix storage presented by the Volumes feature?
- A. Prism Central IP
- B. Data Services IP
- C. IPMI IP
- D. Prism Central IP
Answer: B
Explanation:
The Data Services IP address is the address that allows external connections to Nutanix storage presented by the Volumes feature. This address is used to access the storage from external sources and is used for replication and external snapshotting. Reference: https://portal.nutanix.com/page/documents/details?targetId=Prism-Admin-Guide-v5_6:pr-storage-storage-networks-c.html
NEW QUESTION 41
A single host in a four-node AHV-based cluster experiences a complete network failure.
If more than enough resources exist in the cluster to tolerate a node failure, what happens to the user VMs running on that host?
- A. VMs stay up, but are unreachable until connectivity is restored.
- B. VMs remain down until network connectivity is restored.
- C. VMs are live-migrated to the three remaining hosts.
- D. VMs automatically restart on the three remaining hosts.
Answer: C
Explanation:
If a single host in an AHV-based cluster experiences a complete network failure, and if there are enough resources available in the cluster to tolerate a node failure, then the user VMs running on the failed host will be automatically live-migrated to the remaining three hosts in the cluster. This ensures that the VMs stay up and running even if one of the hosts fails. Reference: https://portal.nutanix.com/page/documents/details?targetId=Platform-Administrator-Guide-v5_7:pag-vm-migrate-c.html
NEW QUESTION 42
What is the minimum cluster size for Redundancy Factor 3?
- A. 5 nodes
- B. 4 nodes
- C. 3 nodes
- D. 6 nodes
Answer: D
Explanation:
The minimum cluster size for Redundancy Factor 3 is 6 nodes. Redundancy Factor is a measure of how many copies of the data are stored in the cluster. Redundancy Factor 3 means that there are 3 copies of the data stored in the cluster, which requires at least 6 nodes in the cluster to ensure that all data is stored.
NEW QUESTION 43
An administrator manages a memory-sensitive application that consists of multiple VMs. The administrator needs to understand if workloads, historically, have been evenly distributed across these VMs.
What should the administrator do?
- A. Run cluster efficiency summary report selecting all the VMs that constitute the applications.
- B. Filter VMs list by using Memory Usage.
- C. Add Memory usage chart to Analysis dashboard for each required VM.
- D. Create an Alert Policy with VM as entity type and memory usage as a metric.
Answer: A
Explanation:
Run cluster efficiency summary report selecting all the VMs that constitute the applications. Running a cluster efficiency summary report selecting all the VMs that constitute the application will allow the administrator to understand if workloads, historically, have been evenly distributed across these VMs. This report will provide information about the average and peak memory usage for each of the VMs. Reference: https://portal.nutanix.com/page/documents/details?targetId=Platform-Administrator-Guide-v5_7:pag-cluster-efficiency-report-c.html
NEW QUESTION 44
Nutanix Support Asked an administrator to provide AHV logs to help solve a support request .Which task should be performed to provide log files to the support team?
- A. Enable Pulse to include additional support information
- B. Run NCC Check from the command line
- C. collect logs from the health Page
- D. Upload log files from /home/nutanix/data/logs folder
Answer: B
NEW QUESTION 45
From Prism Central, how can an administrator access a cluster?
- A. Use the cluster quick access from the Settings page.
- B. Use the cluster quick access from the main dashboard widget.
- C. Use the Cluster Summary view.
- D. Use the VM Summary view.
Answer: B
Explanation:
From Prism Central's main dashboard page, an administrator can access any cluster by clicking the cluster quick access link. This will open the cluster summary page, which contains detailed information about the cluster, including the nodes, virtual machines, and applications running on the cluster. Reference: https://portal.nutanix.com/page/documents/details?targetId=Platform-Administrator-Guide-v5_7:pag-prism-central-cluster-access-c.html
NEW QUESTION 46
An Administrator needs to provide users access to prism Central Projects.
What Source of user accounts must the administrator Use?
- A. Local Users
- B. Open LDAP
- C. Active Directory
- D. SAML2 Provider
Answer: C
NEW QUESTION 47
An administrator needs to send weekly performance reviews to several line of business managers about VMs they are managing. Which tool should the administrator use to satisfy this task?
- A. Prism Central Projects with data export
- B. Prism Elements Links to Chart analysis
- C. Prism Elements New Alert policy
- D. Prism Central Reports with a schedule
Answer: D
Explanation:
To send weekly performance reviews to several line of business managers about VMs they are managing, the administrator should use Prism Central Reports with a schedule. Prism Central Reports is a tool that allows the administrator to create custom reports, which can include information such as CPU usage, memory usage, and disk I/O for specific VMs. The administrator can schedule the reports to be generated and sent out on a regular basis, such as weekly. This will allow the line of business managers to review the performance of the VMs they are responsible for on a regular basis, and take appropriate actions if necessary. Reference: https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Admin-Guide-v5_11:pcc-reports-overview_pcc-reports-overview.html
NEW QUESTION 48
An Administrator Wants a VM to Communicate with two Separate VLANs.
What steps should the administrator complete?
- A. Configure a security Policy to assign VLANs to the VM
- B. Add two NICs to the VM and Configure one for each VLAN
- C. Add a single NIC to the VM and Configure it for both VLANs
- D. Turn on IPAM for autoconfiguration of VLANs
Answer: B
NEW QUESTION 49
On which entity is Replication Factor configured?
- A. Oplog
- B. Volume
- C. Host
- D. Container
Answer: D
Explanation:
Replication Factor is configured on a Container entity. Containers group together virtual disks and files, and allow administrators to set policies on a group level. This allows for increased flexibility in managing storage resources and allows administrators to easily set policies across multiple virtual disks and files.
Replication Factor is configured on Containers. A container is a logical grouping of one or more storage pools and defines the storage resources available to virtual machines. The replication factor is a setting that determines the number of copies of data that are stored across the cluster. By configuring the replication factor on a container, you are setting the number of copies of data that will be stored for all virtual machines that are associated with that container.
For example, if you have a container with a replication factor of 3, it means that three copies of data will be stored across the cluster, and two copies are required to reconstruct the data in case of a failure.
NEW QUESTION 50
......
Realistic TestSimulate NCA-6.5 Dumps PDF - 100% Passing Guarantee: https://www.testsimulate.com/NCA-6.5-study-materials.html