[Mar-2023] Download Real DES-1121 Exam Dumps for candidates. 100% Free Dump Files

Prepare Important Exam with DES-1121 Exam Dumps(2023) 

Dell EMC PowerMax and VMAX Family Solutions Specialist Exam Certification Details:

Exam Name	Dell EMC Certified Specialist - Implementation Engineer - PowerMax and VMAX Family Solutions (DCS-IE)
Passing Score	63%
Exam Price	$230 (USD)
Schedule Exam	Pearson VUE
Exam Code	DES-1121
Duration	90 mins

 

NEW QUESTION 36
An array has reached its capacity m the Storage Resource Pool (SRP). What is the function of the SRP Reserved Capacity?

• A. Provide space for snapshot deltas
• B. Accommodate new host writes
• C. Provide space for snapshot copies
• D. Accommodate SRDF/A delta sets

Answer: D

 

NEW QUESTION 37
Which units of measure are used to specify the size type when creating volumes in Unisphere?

• A. Cylinders, MB, GB, TB
• B. Cylinders, GB, TB. PB
• C. MB and GB only
• D. MB, TB, PB

Answer: B

 

NEW QUESTION 38
In PowerMax VMAX All Flash and VMAX3 which thin provisioning component can be changed with SYMCLI or Unisphere?

• A. Storage Group
• B. Virtual Provisioning Pool
• C. Disk Group
• D. Storage Resource Pool

Answer: D

 

NEW QUESTION 39
What is the performance metric for the read-to-write ratio of workloads on a specific logical block address?

• A. Data spanning
• B. Workload type
• C. Prefetch
• D. Workload clustering

Answer: B

 

NEW QUESTION 40
What is the correct sequence of steps to obtain PowerMax licenses and ensure the PowerMax is configured to allow the licensed features to work properly?

Answer:

Explanation:

 

NEW QUESTION 41
What are the default settings for a Storage Group in PowerMax, VMAX All Flash, and VMAX3?

• A. No SRP and no SL
• B. Default SRP and Optimized SL
• C. Default SRP and no SL
• D. No SRP and Optimized SL

Answer: B

 

NEW QUESTION 42
On a PowerMax or VMAX Family array, what is the default Dynamic I/O distribution mode setting when a Storage Group is associated with Host I/O Limits?

• A. Always
• B. On Failure
• C. Balanced
• D. Never

Answer: D

 

NEW QUESTION 43
A PowerMax administrator modified a Storage Group to add more volumes. The administrator then decides to use the Suitability Check to ensure compliance is met. The Suitability check runs but does not provide any information.
What is the likely cause for this issue?

• A. Volumes were added to the Storage Group before using the Suitability report
• B. Array has not been registered for performance data collection
• C. Steps were skipped in the Modify Storage Group setup before running the Suitability Check
• D. Suitability Check was run before the Storage Group was configured

Answer: C

 

NEW QUESTION 44
You have just presented storage to an ESXi server and want to rescan the storage adapter to ensure the server can see the new volume Based on recommended best practices, what is the preferred method to perform this task?

• A. Use the vSphere VSI plugin to rescan the entire cluster
• B. Run the command from a non-cluster host using the ESX CLI
• C. Use the vSphere Client to perform the rescan of the host
• D. Run the command from the ESXi server with the ESX CLI enabled

Answer: D

 

NEW QUESTION 45
A host has LUNs assigned through a Masking View containing one regular Storage Group The Storage Group has the gold service level assigned One LUN requires a higher service level What is the correct sequence of steps required to assign the platinum service level to that LUN?

Answer:

Explanation:

 

NEW QUESTION 46
When listing the details of a snapshot, what does "Total Deltas" reference?

• A. Difference between the snapshot and the source
• B. Difference between the snapshot and the target
• C. Difference between the source and target
• D. Difference between the snapshot and a newer snapshot

Answer: D

 

NEW QUESTION 47
Which Unisphere for PowerMax client connection authentication type is irrevocable once it is selected?

• A. x.509 Common/Principal Name
• B. Windows AD Domain-based
• C. Multi-factor Authentication
• D. LDAP - SSL

Answer: D

 

NEW QUESTION 48
Which service has to be manually started first when Unisphere services are down?

• A. SMAS
• B. SMI-S
• C. SMASDB
• D. SYMEVENT

Answer: A

Explanation:
https://www.dell.com/support/kbdoc/en-ca/000167303/powermax-vmax-all-flash-and-unisphere-for-powermax-smas-service-does-not-start-for-new-installation-of-unisphere-for-powermax-on-rhel-platform

 

NEW QUESTION 49
An RDF group on a VMAX3 array is being replicated in SRDF/A mode to a remote VMAX3 array To accommodate application growth a new R1 device needs to be added to the RDF group SRDF/A consistency of the existing devices in the RDF group should be maintained when the new device is added.
What is the correct sequence of steps for adding the new R1 device and making it available for application use?

Answer:

Explanation:

 

NEW QUESTION 50
What does a service level define*?

• A. Expected average throughput for a disk group
• B. Expected average response time target for a Storage Group
• C. Expected average response time target for a disk group
• D. Expected average throughput for a Storage Group

Answer: B

 

NEW QUESTION 51
What is the maximum number of supported cascaded Storage Group levels in PowerMax and VMAX Family arrays?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: C

 

NEW QUESTION 52
When using TimeFinder SnapVX, what is the maximum number of linked targets allowed per source?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: A

 

NEW QUESTION 53
A systems administrator wants to know how to convert SRDF ports back to FA ports on their PowerMax array What information should be provided'?

• A. Make the change using Solutions Enabler or Unisphere for PowerMax
• B. Array will require an upgraded bin file to complete the change
• C. A Simplified SymmWin script must be run from the PowerMax MMCS
• D. Change can only be completed using Solutions Enabler or an upgraded bin file

Answer: A

 

NEW QUESTION 54
A systems administrator asks whether their host is supported for non-disruptive migration (NDM) between PowerMax arrays. The host they plan to migrate has one HBA and no multipathing software. What information should be provided to the administrator?

• A. NDM is supported for the host
• B. Upgrade to the latest host HBA driver version
• C. Install Solutions Enabler on the host
• D. NDM is not supported for the host

Answer: A

 

NEW QUESTION 55
What is the maximum number of bricks that can be configured on a PowerMac 8000 system bay?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: A

 

NEW QUESTION 56
Which compression algorithm is used on a PowerMax?

• A. FastLZ
• B. LZS
• C. Deflate
• D. LZW

Answer: C

 

NEW QUESTION 57
What is a recommendation when using Open Replicator to migrate data from a supported third-party array to a VMAX3 array?

• A. Host I/O to the control devices on the VMAX3 array is allowed after the migration completes
• B. Control devices on the VMAX3 array must be set to Not Ready for the duration of the migration
• C. Host I/O to the remote devices on the third-party array can continue during the migration
• D. Host I/O to the remote devices on the third-party array should be stopped for the duration of the migration

Answer: D

 

NEW QUESTION 58
Which PowerMax software packages include NorvDisruplive Migration?

• A. F and Essentials
• B. Essentials and Pro
• C. FX and Pro
• D. F and FX

Answer: C

 

NEW QUESTION 59
What are the Compliance levels tor Storage Groups in Unisphere for PowerMax?

• A. Critical, Marginal. Warning, and No Status
• B. Fatal. Critical. Stable, and No Status
• C. Critical, Marginal. Stable, and No Status
• D. Fatal Critical Warning, and No Status

Answer: C

 

NEW QUESTION 60
......

Dell EMC DES-1121 Exam Syllabus Topics:

Topic	Details	Weights
Unisphere for PowerMax Implementation and Administration	-Explain Unisphere for PowerMax functionality, architecture, and howadministration tasks are performed -Describe how Unisphere for PowerMax is installed and how to navigatethe Unisphere for PowerMax user interface	8%
Non-Disruptive Migration to PowerMax and VMAX Family	-Describe Non-Disruptive Migrations to PowerMax and VMAX Family arrays - Identify and describe how Non-Disruptive Migrations using Unisphere for PowerMax and Non-Disruptive Migrations using SYMCLI are performed	9%
PowerMax and VMAX Family Local and Remote Replication	-Describe TimeFinder SnapVX architecture, features, capabilities, benefits,and management -Describe SRDF architecture, features, capabilities, benefits, andmanagement -Describe Open Replicator architecture, features, capabilities, benefits,and management	9%

 

DES-1121 Questions - Truly Beneficial For Your EMC Exam: https://www.testsimulate.com/DES-1121-study-materials.html