[Mar 15, 2024] 100% Latest Most updated SPLK-2002 Questions and Answers

Try with 100% Real Exam Questions and Answers

NEW QUESTION # 22
At which default interval does metrics.log generate a periodic report regarding license utilization?

• A. 30 seconds
• B. 10 seconds
• C. 60 seconds
• D. 300 seconds

Answer: A

NEW QUESTION # 23
Which command will permanently decommission a peer node operating in an indexer cluster?

• A. splunk decommission --enforce counts
• B. splunk stop -f
• C. splunk offline -f
• D. splunk offline --enforce-counts

Answer: D

Explanation:
Explanation/Reference: https://docs.splunk.com/Documentation/Splunk/7.3.2/Indexer/Takeapeeroffline

NEW QUESTION # 24
Which of the following clarification steps should be taken if apps are not appearing on a deployment client?
(Select all that apply.)

• A. Search for relevant events in splunkd.log of the deployment server.
• B. Check the content of SPLUNK_HOME/etc/apps of the deployment server.
• C. Check deploymentclient.conf of the deployment client.
• D. Check serverclass.conf of the deployment server.

Answer: A,C,D

Explanation:
Explanation
The following clarification steps should be taken if apps are not appearing on a deployment client:
* Check serverclass.conf of the deployment server. This file defines the server classes and the apps and configurations that they should receive from the deployment server. Make sure that the deployment client belongs to the correct server class and that the server class has the desired apps and configurations.
* Check deploymentclient.conf of the deployment client. This file specifies the deployment server that the deployment client contacts and the client name that it uses. Make sure that the deployment client is pointing to the correct deployment server and that the client name matches the server class criteria.
* Search for relevant events in splunkd.log of the deployment server. This file contains information about the deployment server activities, such as sending apps and configurations to the deployment clients, detecting client check-ins, and logging any errors or warnings. Look for any events that indicate a problem with the deployment server or the deployment client.
* Checking the content of SPLUNK_HOME/etc/apps of the deployment server is not a necessary clarification step, as this directory does not contain the apps and configurations that are distributed to the deployment clients. The apps and configurations for the deployment server are stored in SPLUNK_HOME/etc/deployment-apps. For more information, see Configure deployment server and clients in the Splunk documentation.

NEW QUESTION # 25
A Splunk user successfully extracted an ip address into a field called src_ip. Their colleague cannot see that field in their search results with events known to have src_ip. Which of the following may explain the problem? (Select all that apply.)

• A. The events are tagged as communicate, but are missing the network tag.
• B. The field was extracted as a private knowledge object.
• C. The Typing Queue, which does regular expression replacements, is blocked.
• D. The colleague did not explicitly use the field in the search and the search was set to Fast Mode.

Answer: D

NEW QUESTION # 26
Which of the following clarification steps should be taken if apps are not appearing on a deployment client?
(Select all that apply.)

• A. Check the content of SPLUNK_HOME/etc/appsof the deployment server.
• B. Search for relevant events in splunkd.logof the deployment server.
• C. Check serverclass.confof the deployment server.
• D. Check deploymentclient.confof the deployment client.

Answer: A,C,D

Explanation:
Explanation/Reference: https://answers.splunk.com/answers/177021/why-is-deployment-client-not-picking-up-changes-
to.html

NEW QUESTION # 27
When using the props.conf LINE_BREAKER attribute to delimit multi-line events, the SHOULD_LINEMERGE attribute should be set to what?

• A. None
• B. False
• C. True
• D. Auto

Answer: B

Explanation:
Explanation
When using the props.conf LINE_BREAKER attribute to delimit multi-line events, the SHOULD_LINEMERGE attribute should be set to false. This tells Splunk not to merge events that have been broken by the LINE_BREAKER. Setting the SHOULD_LINEMERGE attribute to true, auto, or none will cause Splunk to ignore the LINE_BREAKER and merge events based on other criteria. For more information, see Configure event line breaking in the Splunk documentation.

NEW QUESTION # 28
In search head clustering, which of the following methods can you use to transfer captaincy to a different member? (Select all that apply.)

• A. Use the Monitoring Console.
• B. Use the Search Head Clustering settings menu from Splunk Web on any member.
• C. Run the splunk transfer shcluster-captaincommand from the current captain.
• D. Run the splunk transfer shcluster-captaincommand from the member you would like to become the captain.

Answer: B,D

Explanation:
Explanation/Reference: https://docs.splunk.com/Documentation/Splunk/7.3.1/DistSearch/Transfercaptain

NEW QUESTION # 29
The guidance Splunk gives for estimating size on for syslog data is 50% of original data size. How does this divide between files in the index?

• A. rawdata is: 35%, tsidx is: 15%
• B. rawdata is: 15%, tsidx is: 35%
• C. rawdata is: 40%, tsidx is: 10%
• D. rawdata is: 10%, tsidx is: 40%

Answer: B

NEW QUESTION # 30
Which of the following is true regarding Splunk Enterprise performance? (Select all that apply.)

• A. Adding search heads provides additional CPU cores to run more concurrent searches.
• B. Adding search peers increases the maximum size of search results.
• C. Adding search peers increases the search throughput as search load increases.
• D. Adding RAM to an existing search heads provides additional search capacity.

Answer: A,D

Explanation:
Explanation/Reference: https://docs.splunk.com/Documentation/Splunk/7.3.2/Capacity/
HowsavedsearchesaffectSplunkEnterpriseperformance

NEW QUESTION # 31
What is the algorithm used to determine captaincy in a Splunk search head cluster?

• A. Rapt distributed consensus.
• B. Rift distributed consensus.
• C. Raft distributed consensus.
• D. Round-robin distribution consensus.

Answer: C

Explanation:
Explanation/Reference: https://answers.splunk.com/answers/664102/need-to-know-about-raft-directory-on-search-head- c.html

NEW QUESTION # 32
Which of the following artifacts are included in a Splunk diagfile? (Select all that apply.)

• A. Configuration files.
• B. OS settings.
• C. Customer data.
• D. Internal logs.

Answer: A,D

Explanation:
Explanation/Reference: https://docs.splunk.com/Documentation/Splunk/7.3.2/Troubleshooting/Generateadiag

NEW QUESTION # 33
Because Splunk indexing is read/write intensive, it is important to select the appropriate disk storage solution for each deployment. Which of the following statements is accurate about disk storage?

• A. The recommended RAID setup is RAID 10 (1 + 0).
• B. Virtualized environments are usually preferred over bare metal for Splunk indexers.
• C. High performance SAN should never be used.
• D. Enable NFS for storing hot and warm buckets.

Answer: A

Explanation:
Explanation
Splunk indexing is read/write intensive, as it involves reading data from various sources, writing data to disk, and reading data from disk for searching and reporting. Therefore, it is important to select the appropriate disk storage solution for each deployment, based on the performance, reliability, and cost requirements. The recommended RAID setup for Splunk indexers is RAID 10 (1 + 0), as it provides the best balance of performance and reliability. RAID 10 combines the advantages of RAID 1 (mirroring) and RAID 0 (striping), which means that it offers both data redundancy and data distribution. RAID 10 can tolerate multiple disk failures, as long as they are not in the same mirrored pair, and it can improve the read and write speed, as it can access multiple disks in parallel2 High performance SAN (Storage Area Network) can be used for Splunk indexers, but it is not recommended, as it is more expensive and complex than local disks. SAN also introduces additional network latency and dependency, which can affect the performance and availability of Splunk indexers. SAN is more suitable for Splunk search heads, as they are less read/write intensive and more CPU intensive2 NFS (Network File System) should not be used for storing hot and warm buckets, as it can cause data corruption, data loss, and performance degradation. NFS is a network-based file system that allows multiple clients to access the same files on a remote server. NFS is not compatible with Splunk index replication and search head clustering, as it can cause conflicts and inconsistencies among the Splunk instances. NFS is also slower and less reliable than local disks, as it depends on the network bandwidth and availability. NFS can be used for storing cold and frozen buckets, as they are less frequently accessed and less critical for Splunk operations2 Virtualized environments are not usually preferred over bare metal for Splunk indexers, as they can introduce additional overhead and complexity. Virtualized environments can affect the performance and reliability of Splunk indexers, as they share the physical resources and the network with other virtual machines. Virtualized environments can also complicate the monitoring and troubleshooting of Splunk indexers, as they add another layer of abstraction and configuration. Virtualized environments can be used for Splunk indexers, but they require careful planning and tuning to ensure optimal performance and availability2

NEW QUESTION # 34
Which of the following will cause the greatest reduction in disk size requirements for a cluster of N indexers running Splunk Enterprise Security?

• A. Setting the cluster search factor to N-1.
• B. Setting the cluster replication factor to N-1.
• C. Increasing the number of buckets per index.
• D. Decreasing the data model acceleration range.

Answer: B

NEW QUESTION # 35
Splunk configuration parameter settings can differ between multiple .conf files of the same name contained within different apps. Which of the following directories has the highest precedence?

• A. System default directory.
• B. App default directories, in ASCII order.
• C. System local directory.
• D. App local directories, in ASCII order.

Answer: C

Explanation:
Explanation/Reference: https://docs.splunk.com/Documentation/Splunk/7.3.2/Admin/Wheretofindtheconfigurationfiles

NEW QUESTION # 36
Which search head cluster component is responsible for pushing knowledge bundles to search peers, replicating configuration changes to search head cluster members, and scheduling jobs across the search head cluster?

• A. Deployment server
• B. Deployer
• C. Master
• D. Captain

Answer: D

NEW QUESTION # 37
Splunk Enterprise platform instrumentation refers to data that the Splunk Enterprise deployment logs in the _introspection index. Which of the following logs are included in this index? (Select all that apply.)

• A. audit.log
• B. resource_usage.log
• C. disk_objects.log
• D. metrics.log

Answer: B,C

NEW QUESTION # 38
A Splunk architect has inherited the Splunk deployment at Buttercup Games and end users are complaining that the events are inconsistently formatted for a web sourcetype. Further investigation reveals that not all web logs flow through the same infrastructure: some of the data goes through heavy forwarders and some of the forwarders are managed by another department.
Which of the following items might be the cause for this issue?

• A. The search head may have different configurations than the indexers.
• B. The indexers may have different configurations than the heavy forwarders.
• C. The forwarders managed by the other department are an older version than the rest.
• D. The data inputs are not properly configured across all the forwarders.

Answer: B

NEW QUESTION # 39
......

New Splunk SPLK-2002 Dumps & Questions: https://www.testsimulate.com/SPLK-2002-study-materials.html