[Jan 01, 2022] Updates Up to 365 days On Valid HPE0-J58 Braindumps
Best QualityHPE0-J58 Exam Questions HP Test To Gain Brilliante Result
HP HPE0-J58 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
NEW QUESTION 31
A customer has HPE B-series switches and is not interested in Extended Fabric licenses for edge switches.
They have sites over 10km apart.
Which SAN extension technology should you recommend?
- A. FC over CWDM
- B. FCoE
- C. FCIP
- D. FC over DWDM
Answer: C
NEW QUESTION 32
A customer has two data centers in a metropolitan areA. The link between the data centers is IP-based and satisfies the bandwidth and latency requirements. They have the following requirements:
* Transparently and automatically failover and fall back between sites
* Provide block and file access
* Block access must provide connectivity for fibre channel and iSCSi hosts
* All-Flash storage solution
You plan to propose a design based on HPE 3PAR storage arrays.
What would be the most cost-effective model that meets the customer needs?
- A. HPE 3PAR 20450
- B. HPE 3PAR 20850
- C. HPE 3PAR 9450
- D. HPE 3PAR 8450
Answer: D
NEW QUESTION 33
You want to use FCAP authentication in an environment with FOS 7.3 running switches with no extra licenses.
What should you do to use this feature?
- A. A Secure Fabric license must be added to all switches in the fabric
- B. Certificates must be obtained from Brocade
- C. Switches must be upgraded to FOS 7.4 or higher
- D. Certificates must be obtained from a third-party vendor
Answer: C
NEW QUESTION 34
A customer has a requirement to provide disaster recovery for an application. The application has an RPO of 30 mins, with an RTO of 15 mins. How can HPE 3PAR Remote Copy help meet the customer's specified requirements in the most cost effective manner?
- A. by using Periodic Asynchronous Replication with an interval of 15 mins
- B. by using Synchronous Long Distance Mode
- C. by using Synchronous Replication
- D. by using Streaming Asynchronous replication with an interval of 15 mins
Answer: C
NEW QUESTION 35
A customer has a Tier 1 application that has high bandwidth and is sensitive to latency.
The customer needs a solution to support this application. The solution must support replication between two sites over dark fiber links and support an RPO of zero.
Which solution meets the customer requirements?
- A. dual HPE 3PAR 8400 arrays with data replicated using iSCSI
- B. dual Nimble AF40 arrays with data replicated over FC
- C. dual HPE 3PAR 9450 arrays with data replicated using RCFC
- D. dual Nimble HF20 arrays with data replicated over iSCSI
Answer: A
NEW QUESTION 36
You receive an error when attempting to utilize SAF Analyze to upload customer data that you have collected to develop reports for a new proposal. What must you do first to begin the process?
- A. Create a gatekeeper on your SAF utility server
- B. Create a new opportunity
- C. Export the data as .xml
- D. Create a single .zip file of all data exports
Answer: D
NEW QUESTION 37
You are proposing a replication solution to a customer. A competitor offers a solution based on storage virtualization appliances.
What should you stress about an HPE 3PAR replication solution in regard to the competitor's proposal?
- A. It offers best-in-class backup and restore capabilities
- B. It will add on-the-fly encryption and compression to data being replicated outside the customer's DC
- C. It offers superior virtualization of 3rd party storage arrays
- D. It means less overhead for management and monitoring
Answer: D
NEW QUESTION 38
Click and drag the steps on the left into the appropriate order on the right to set up an HPE 3PAR array in InfoSight.
Answer:
Explanation:
NEW QUESTION 39
A customer has a pair of HPE 3PAR arrays with Synchronous Replication enabled. They need recommendations for deploying the Quorum Witness when implementing Peer Persistence.
What should you recommend to the customer?
- A. The Quorum Witness should be in the primary data center, with FC connectivity to the HPE 3PAR there
- B. The Quorum Witness should be in a third data center, with FC connectivity to both HPE 3PARs
- C. The Quorum Witness should be in the secondary data center, with IP connectivity to the HPE 3PAR there
- D. The Quorum Witness should be in a third data center, with IP connectivity to both HPE 3PARs
Answer: B
Explanation:
Explanation/Reference: https://h20195.www2.hpe.com/v2/GetPDF.aspx/4AA5-8914ENW.pdf
NEW QUESTION 40
A customer has a requirement to provide disaster recovery for an application. The application has an RPO of
30 mins, with an RTO of 15 mins. How can HPE 3PAR Remote Copy help meet the customer's specified requirements in the most cost effective manner?
- A. by using Periodic Asynchronous Replication with an interval of 15 mins
- B. by using Synchronous Long Distance Mode
- C. by using Synchronous Replication
- D. by using Streaming Asynchronous replication with an interval of 15 mins
Answer: C
Explanation:
Explanation
NEW QUESTION 41
Refer to the Exhibit.
A customer with an existing HPE Nimble installation sends you the output shown. The administrator who initially set up the replication has left the company.
They ask you what the current RPO level for their replication is. How should you respond?
- A. They have an RPO of two minutes
- B. They need to send a screenshot of the volumes tab
- C. They have an RPO of four minutes
- D. They need to verify the RPO level from the host vc-ms-fileserver
Answer: C
NEW QUESTION 42
Which advantage is provided by HPE 3PAR Remote Copy across all replication modes?
- A. Remote Copy support up to 100ms latency over all transport layers
- B. automatic recovery of array failure independent of Remote copy topology
- C. all Remote Copy topologies yield identical RPO and RTO
- D. support of all Remote Copy topologies
Answer: D
NEW QUESTION 43
A customer has two data centers in a metropolitan area. The link between the data centers is IP-based and satisfies the bandwidth and latency requirements. They have the following requirements:
Transparently and automatically failover and fall back between sites
Provide block and file access
Block access must provide connectivity for fibre channel and iSCSi hosts
All-Flash storage solution
You plan to propose a design based on HPE 3PAR storage arrays.
What would be the most cost-effective model that meets the customer needs?
- A. HPE 3PAR 20450
- B. HPE 3PAR 20850
- C. HPE 3PAR 9450
- D. HPE 3PAR 8450
Answer: D
NEW QUESTION 44
Refer to the exhibit.
A customer is considering a new HPE 3PAR for the purpose of implementing deduplication and compression.
Based on the output returned from the NinjaCrawler tool, what do you know about the customer data?
- A. This data has a block size which is not optimal for HPE 3PAR
- B. This data has a video data workload profile
- C. This data is from an HP-UX system
- D. This data is a good candidate for HPE 3PAR deduplication
Answer: C
NEW QUESTION 45
A customer requests a proposal for two HPE 3PAR arrays using asynchronous periodic replication. The customer has two data centers, and the current bandwidth available for replication between the data centers is
200 Mb/s.
The customer is replicating 30TB, and the change rate is 3% in 24 hours. The customer wants to achieve an RPO of 10 minutes.
Which statement about bandwidth and replication is true for the customer requirements?
- A. The bandwidth is sufficient, and replication must happen every 5 minutes
- B. The bandwidth is sufficient, and replication must happen every 10 minutes
- C. The bandwidth will have to be increased, and replication must happen every 10 minutes
- D. The bandwidth will have to be increased, and replication must happen every 5 minutes
Answer: D
NEW QUESTION 46
Refer to the exhibit, which reflects the Bill of Materials (BOM) configuration for one datacenter.
A customer needs a new storage solution of two HPE 3PAR 8440 arrays. The customer's environment consists of eight physical servers in each data center attached to the SAN and one StoreOnce 3540 system with two FC I/O cards. The distance between data centers is less than 75 meters.
What should you add the BOM to meet the customer needs?
- A. one HPE 3PAR StoreServ 8000 Direct Connect Cabling Option for Drive Enclosure for each HPE 3PAR
8440 - B. one HPR 3PAR StoreServ AC RPS Service Processor
- C. one HPE SN3000B SAN Switch 12-port Upgrade E-LTU per switch, appropriate number of SFPs and cables
- D. one HPE 25m Mini SAS High Density Active Optical Cable for each HPE 3PAR 8440
Answer: B
NEW QUESTION 47
A customer has a requirement to provide disaster recovery for an application. The application has an RPO of
30 mins, with an RTO of 15 mins. How can HPE 3PAR Remote Copy help meet the customer's specified requirements in the most cost effective manner?
- A. by using Periodic Asynchronous Replication with an interval of 15 mins
- B. by using Synchronous Long Distance Mode
- C. by using Synchronous Replication
- D. by using Streaming Asynchronous replication with an interval of 15 mins
Answer: C
NEW QUESTION 48
A customer has started to load their HPE 3PAR 8450 with data, but are not sure what data reduction they are achieving. They ask you to run analysis and estimate the deduplication ratio of data currently on a virtual volume (VV).
Which CLI command should you use to understand data reduction ratios?
- A. tunevv
- B. checkvv
- C. convertvv
- D. showvv
Answer: B
NEW QUESTION 49
A customer needs a new replication solution that makes use of capacity efficiency technologies, even though data is being replicated to another array.
You have been developing a solution that includes two HPE 3PAR arrays. What should you emphasize in your proposal?
- A. Thin Technologies, deduplication, and compression can be used on both sides with volumes in Remote Copy groups
- B. The arrays share deduplication hash tables, and the target array only needs to compress the replicated data from the source array
- C. Compression technologies increase the effective bandwidth being available for replication and disaster recovery
- D. The data being replicated will travel the connection between the arrays fully compressed and deduplicated
Answer: D
NEW QUESTION 50
You are starting an assessment to design a new multi-storage environment for a customer. You have collected data on all the current arrays using SAF collector.
What should be the next step in your design process?
- A. Open the .zip file with NinjaSTARS
- B. Send the .zip file to [email protected]
- C. Upload the .zip file to the SAF Portal
- D. Import the .zip file into OCA
Answer: A
NEW QUESTION 51
A customer wants an HPE 3PAR array with about 400,000 IOPS and over 6000 MBs per second through - put at 16K block size. What should you consider in your design?
- A. Adhere to the initiators per port, initiators per system, and fan-in/fan-out limits in SPOCK
- B. Configure the HA-enclosure to protect against enclosure failure
- C. Focus the configuration on the effective capacity ratio rather than data reduction ratio
- D. Ensure that the write IO service time on the array is under 2ms
Answer: C
NEW QUESTION 52
A customer has a pair of HPE 3PAR arrays with Synchronous Replication enabled. They need recommendations for deploying the Quorum Witness when implementing Peer Persistence.
What should you recommend to the customer?
- A. The Quorum Witness should be in the primary data center, with FC connectivity to the HPE 3PAR there
- B. The Quorum Witness should be in a third data center, with FC connectivity to both HPE 3PARs
- C. The Quorum Witness should be in the secondary data center, with IP connectivity to the HPE 3PAR there
- D. The Quorum Witness should be in a third data center, with IP connectivity to both HPE 3PARs
Answer: B
Explanation:
Explanation/Reference:
Reference: https://h20195.www2.hpe.com/v2/GetPDF.aspx/4AA5-8914ENW.pdf
NEW QUESTION 53
A customer is interested in using HPE InfoSight Cross-stack Analytics for VMware.
Where does the customer need to make the appropriate configuration changes to makes this active?
- A. HPE 3PAR SSMC
- B. HPE InfoSight Portal
- C. HPE 3PAR Service Processor
- D. VMware vCenter
Answer: B
NEW QUESTION 54
A customer requests a proposal for two HPE 3PAR arrays using asynchronous periodic replication. The customer has two data centers, and the current bandwidth available for replication between the data centers is
200 Mb/s.
The customer is replicating 30TB, and the change rate is 3% in 24 hours. The customer wants to achieve an RPO of 10 minutes.
Which statement about bandwidth and replication is true for the customer requirements?
- A. The bandwidth is sufficient, and replication must happen every 5 minutes
- B. The bandwidth is sufficient, and replication must happen every 10 minutes
- C. The bandwidth will have to be increased, and replication must happen every 10 minutes
- D. The bandwidth will have to be increased, and replication must happen every 5 minutes
Answer: D
Explanation:
Explanation
NEW QUESTION 55
A customer wants to enable an automated failover for their two existing HPE 3PAR solutions, which are located in two different sites. Each solution has an All-inclusive Single-System Software license.
Which component is required to enable this function?
- A. All-inclusive Multi-System Software License
- B. Dark fibre connection between the sites
- C. Fibre channel Bridges to connect the disk shelfs
- D. Additional HPE 3PAR system as quorum witness
Answer: A
NEW QUESTION 56
......
Focus on HPE0-J58 All-in-One Exam Guide For Quick Preparation: https://www.testsimulate.com/HPE0-J58-study-materials.html