HPE6-A79 Training & Certification Get Latest HP ACMX Updated on Sep 29, 2021 [Q31-Q53]

HPE6-A79 Training & Certification Get Latest HP ACMX Updated on Sep 29, 2021

Certification Training for HPE6-A79 Exam Dumps Test Engine

NEW QUESTION 31
Refer to the exhibit:

A company acquires ten barcode scanners to run inventory tasks. These WiFi devices support WPA2-PSK security only. The network administrator deploys a WLAN named scanners using the configuration shown in the exhibit.
What must the network administrator do next to ensure that the scanner devices successfully connect to their SSID?

A. Enable L2 Authentication Fail Through.
B. Add scanner MAC addresses in user derivation rules.
C. Set internal as the MAC authentication server group.
D. Add scanner MAC addresses in the internal database.

Answer: D

NEW QUESTION 32
A network administrator has updated the ArubaOS code of a standalone Mobility Controller (MC) that is used for User-Based Tunneling (UBT) to a newer early release. Ever since the MC seems to reject PAPI sessions from the switch with the 10.1.10.10 IP address. Also the controller's prompt is now followed by a star mark: "(MC_VA) [mynode] *#" When opening a support ticket, an Aruba TAC engineer asks the administrator to gather the crash logs and if possible replicate UBT connection attempts from the switch while running packet captures of PAPI traffic on the controller and obtain the PCAP files. The administrator has a PC with Wireshark and TFTP server using the 10.0.20.20 IP address.
What commands must the administrator issue to accomplish these requests? (Choose two.)

A. Option D
B. Option B
C. Option A
D. Option C
E. Option E

Answer: B,E

NEW QUESTION 33
Refer to the exhibit.

A network administrator deploys a new Mobility Master (MM) - Mobility Controller (MC) network. To test the solution, the network administrator accesses the console of a pair of APs and statically provisions them. However, one of the APs does not propagate the configured SSIDs. The network administrator looks at the logs and sees the output shown in the exhibit.
Which actions must the network administrator take to solve the problem?

A. Re-provision one of the APs with a different name or modify the name in the whitelist.
B. Re-provision the AP with a different group, and modify the name of one AP in the whitelist.
C. Re-provision one of the APs with a different name, and add new entries with the proper group in the whitelist.
D. Create another AP group in the MC's configuration, and re-provision one AP with a different group.

Answer: A

NEW QUESTION 34
A network administrator is in charge of a Mobility Master (MM) - Mobility Controller (MC) based WLAN. The administrator has deployed an Airwave Management Platform (AMP) server in order to improve the monitoring capabilities and generate reports and alerts.
The administrator has configured SNMPv3 and Admin credentials on both the MMs and MCs and has created Groups and Folders in the AMP server.
What two additional steps must the administrator do in order to let Airwave monitor the network devices? (Choose two.)

A. Move "New" devices into a group and folder in Airwave.
B. Manually add the Active MM and wait for automatic Discovery.
C. Map the AMP's IP address with a mgmt-config profile in the MM.
D. Set the AMP's IP address and Org string as DHCP option 43.
E. Manually add each MM. MC and Access Point in the AMP server.

Answer: B,C

NEW QUESTION 35
A network administrator is in charge of a Mobility Master (MM) - Mobility Controller (MC) based network security. Recently the Air Monitors detected a Rogue AP in the network and the administrator wants to enable "Tarpit" based wireless containment.
What profile must the administrator enable "tarpit" wireless containment on?

A. IDS General profile
B. IDS Unauthorized device profile
C. IDS DOS profile
D. IDS profile

Answer: B

NEW QUESTION 36
Refer to the exhibit.

A network administrator has a Mobility Master (MM) Mobility Controller (MC) architecture along with the MC in the DMZ for terminating RAPs. The network firewall has been provisioned to allow access to the MC in the DMZ for both UDP 500 and 4500. Then he proceeds to provision an AP as shown in the exhibit.
Which additional configuration steps must the administrator to assure RAPs successfully contact the MC? (Choose two.)

A. Create the RAP1 account in the InternalDB of the MM.
B. Create an IP local pool and PSK at the device node level.
C. Create the RAP1 account in the InternalDB of the MC.
D. Create an IP local pool and PSK at the /mm/mynode level.
E. Add the RAP1 entry in the CPsec whitelist at the MM level.

Answer: D,E

NEW QUESTION 37
Refer to the exhibit.

A network administrator deploys DSCP based prioritization in the entire wired network to improve voice quality for a SIP-based IP telephony system used by the company. However, users report that calls they make from WLAN have poor audio quality, while desktop phones do not experience the same problem. The network administrator makes a test call and looks in the datapath session table.
Based on the output shown in the exhibit, what is one area that the network administrator should focus on?

A. wired network congestion
B. UCC based DSCP correction
C. WMM support on the WLAN
D. Dynamic Multicast Rate Optimization

Answer: A

NEW QUESTION 38
Refer to the exhibit

A network administrator deploys a standalone Mobility Controller (MC) and configures some VAPs within the CAMPUS AP group. The network administrator realizes that none of the VAPs are being broadcasted.
Based on the output shown in the exhibit, what should the network administrator do to solve this problem?

A. Install MM licenses and install MC-VA licenses, then install RFP licenses.
B. Install MM licenses, then install PEF licenses and enable the PEF feature.
C. Install MC-VA licenses, then reprovision the APs.
D. Install MC-VA licenses, then install PEF licenses and enabled the PEF feature.

Answer: A

NEW QUESTION 39
A joint venture between two companies results in a fully functional WLAN Aruba solution. The network administrator uses the following script to integrate the WLAN solution with two radius servers, radius1 and radius2.

While all users authenticate with [email protected] type of credentials, radius1 has user accounts with the domain name portion.
Which additional configuration is required to authenticate corp1.com users with radius1 and corp2 users with radius2?

A. Option A
B. Option D
C. Option B
D. Option C

Answer: A

NEW QUESTION 40
An organization wants to deploy a WLAN infrastructure that provides connectivity to these client categories:
* Employees
* Contractors
* Guest users
* Corporate IoT legacy devices that support no authentication or encryption Employees and contractors must authenticate with company credentials and get network access based on AD group membership. Guest users are required to authenticate with captive portal using predefined credentials. Only employees will run L2 encryption.
Which implementation plan fulfills the requirements while maximizing the channel usage?

A. Create VAP1 to run WPA2-AES and 802.1x authentication, and VAP2 to run opensystem encryption with MAC authentication and captive portal.
B. Create a single VAPto run WPA2-AES and 802.1x authentication. MAC authentication L2 fail through, captive portal, and VIA support.
C. Create VAP1 to run WPA2-AES and 802.1x authentication. VAP2 to run opensystem encryption with MAC authentication, and VAP3 to run opensystem with captive portal and L2 fail through.
D. Create VAP1 to run WPA2-AES and 802.1x authentication. VAP2 to run opensystem encryption with MAC authentication, and VAP3 to run opensystem with captive portal.

Answer: A

NEW QUESTION 41
Refer to the exhibit.

A network administrator deploys a Mobility Master (MM) - Mobility Controller (MC) network with Aps in different locations. Users in one of the locations report that the WiFi network works fine for several hours, and then they are suddenly disconnected. This symptom may happen at any time, up to three times every day, and lasts no more than two minutes.
After some research, the network administrator logs into the MM and reviews the output shown in the exhibit.
Based on this information, what is the most likely reason users get disconnected?

A. AirMatch is applying a scheduled optimization solution.
B. Adaptive Radio Management is reacting to RF events.
C. AirMatch is reacting to non-scheduled RF events.
D. Users in the 2.4 GHz band are being affected by high interference.

Answer: D

NEW QUESTION 42
An organization has several RAPs at different locations that broadcast two SSIDs. The internet-only SSID is in bridge/always mode, and the corporate SSID is in split-tunneling/standard mode. The network administrator deploys 10 more RAPs in different locations.
Users can successfully connect to the corporate SSID that is propagated by a RAP at a remote location. However, they report that it takes too long to access public internet web sites.
What is one part of the configuration that should be checked by the network administrator to verify this RAP deployment?

A. User roles policies
B. IP pool
C. Operating mode
D. Assigned VLAN

Answer: A

NEW QUESTION 43
A network administrator has racked up a 7210 Mobility Controller (MC) that will be terminating 200+ Aps on a medium-size branch office. Next, the technician cabled the appliance with 4SPF+ Direct Attached Cables (DACs) distributed between two-member switching stack and powered it up.
What must the administrator do next in the MCs to assure maximum wired bandwidth utilization?

A. Make all ports trunk interfaces and permit data VLANs.
B. Configure the same MSTP region that the switches have.
C. Disable spanning tree and allocate unique VLANs to each port.
D. Map the four physical ports to port channel 0.
E. Manually set 10Gbps speeds on all ports.

Answer: E

NEW QUESTION 44
Refer to the exhibit.

An Aruba network is deployed with L2 and L3 Mobility Master (MM) redundancy across two datacenters, as shown in the exhibit. The network administrator confirms that all Mobility Controllers (MC) are currently communicating with MM1, which is the L2 Active and, L3 Primary.
Which MM IP will MCs communicate with if MM1 fails?

A. 10.1.1.12
B. 10.2.1.21
C. 10.1.1.10
D. 10.2.1.10

Answer: D

NEW QUESTION 45
Refer to the exhibits.
Exhibit 1

Exhibit 2

A network administrator integrates a current Mobility Master (MM) - Mobility Controller (MC) deployment with a RADIUS server to authenticate a wireless user, the network administrator realizes that the client machine is not failing into the it_department role, as shown the exhibits.
Which configuration is required to map the users into the proper role, based on standard attributes returned by the RADIUS server in the Access Accept message?

A. aaa server-group Corp-Network
set role condition Filter-Id equals it-role set-value it_department
B. aaa server-group ClearPass
set role condition Filter-Id equals it_department set-value it-role
C. aaa server-group Corp-employee
set role condition Filter-Id equals it-role set-value it_department
D. aaa server-group Corp-Network
set role condition Filter-Id equals it_department set-value it-role
E. aaa server-group Corp-employee
set role condition Filter-Id value-of

Answer: C

NEW QUESTION 46
Refer to the exhibits.
Exhibit 1

Exhibit 2

Exhibit 3

Exhibit 4

A captive portal-based solution is deployed in a Mobility Master (MM) - Mobility Controller (MC) network. A wireless station connects to the network and attempts the authentication process. The outputs are shown in the exhibits.
Which names correlate with the authentication and captive portal servers?

A. ClearPass.23 is the authentication server, and cp.mycompany.com is the captive portal server.
B. Internal database in MC2 is the authentication server, and cp.mycompany.com is the captive portal server.
C. cp.mycompany.com is the authentication server, and ClearPass.23 is the captive portal server.
D. ClearPass.23 is the authentication server, and MC2 is the captive portal server.

Answer: A

NEW QUESTION 47
An organization owns a fully functional multi-controller Aruba network with a Virtual Mobility Master (VMM) in VLAN20. They have asked a network consultant to deploy a redundant MM on a different server. The solution must offer the lowest convergence time and require no human interaction in case of failure.
The servers host other virtual machines and are connected to different switches that implement ACLs to protect them. The organization grants the network consultant access to the servers only, and appoints a network administrator to assist with the deployment.
What must the network administrator do so the network consultant can successfully deploy the solution? (Choose two.)

A. Allocate VLAN20 to the second server, and extend it throughout the switches, then reserve one IP address for the second MM and another IP address for its gateway.
B. Allocate VLAN20 to the second server, and extend it throughout the switches, then reserve one IP address for the second MM and another for the VIP.
C. Allocate VLAN20 to the second server, and permit routing between them, then reserve one IP address for the second MM and another IP address for its gateway.
D. Configure an ACL entry that permits UDP 500, TCP 4500, and multicast IP 224.0.0.5.
E. Configure an ACL entry that permits IP protocol 50, UDP port 500, and multicast IP 224.0.0.18.

Answer: A,D

NEW QUESTION 48
A network administrator wants to receive a major alarm every time a controller or an Aruba switch goes down for either a local or an upstream device failure. Which alarm definition must the network administrator create to accomplish this?

Answer:

Explanation:

NEW QUESTION 49
Refer to the exhibit.

Based on the output shown in the exhibit, with which Aruba devices has Access-1 established tunnels?

A. a pair of standalone MCs
B. a pair of MCs within a L3 cluster
C. a single standalone MC
D. a pair of switches running VXLAN

Answer: B

NEW QUESTION 50
Refer to the exhibit.

Based on the output shown in the exhibit, which channel offers the highest quality?

A. Channel 11
B. Channel 6
C. Channel 14
D. Channel 1

Answer: B

NEW QUESTION 51
Refer to the exhibit.

A network administrator has created AAA profile for the corporate VAP. In addition to the regular Radius based authentication, the administrator needs to be able to disconnect the users from either of the two servers that are part of the "Radius" server group.
What must the administrator do next in order to achieve this goal?

A. Create two new RFC 3576 servers and assign them as the RFC 3576 servers in the AAA profile.
B. Use the "Radius' server group as the RFC 3576 server in the AAA profile.
C. Use the "Radius' server group as both the Accounting Server Group and the RFC 3576 server in the AAA profile.
D. Use the "Radius" server group as the RADIUS Accounting Server Group in the AAA profile.

Answer: C

NEW QUESTION 52
Refer to the exhibit.

A network administrator completes the initial configuration dialog of the Mobility Controllers (MCs) and they join the Mobility Master (MM) for the first time. After the MM-MC association process, network administrator only creates AP groups, VAPs, and roles. Next, the network administrator proceeds with the configuration of the policies and creates the policy shown in the exhibit.
Which additional steps must be done to make sure this configuration takes effect over the contractor users?