Give Push to your Success with Nutanix Certified Professional NCP-MCI-6.5 Exam Questions

NCP-MCI-6.5 100% Guarantee Download NCP-MCI-6.5 Exam PDF Q&A

The NCP-MCI-6.5 certification program is designed to help professionals validate their skills and knowledge in managing and deploying Nutanix solutions. Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) v6.5 exam certification program is intended for IT professionals who have a strong foundation in Nutanix solutions and are looking to enhance their skills in the area of Multicloud Infrastructure. Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) v6.5 exam certification program also helps professionals to stay up-to-date with the latest trends and technologies in the industry.

Nutanix NCP-MCI-6.5 certification exam is an excellent opportunity for IT professionals to enhance their skills and knowledge in managing complex IT infrastructures. It is highly valued by organizations that use Nutanix technology, and it can lead to higher salaries and more career opportunities. With the right training and preparation, IT professionals can pass the exam and achieve the Nutanix NCP-MCI-6.5 certification.

 

NEW QUESTION # 75
An administrator needs to shut down an AHV cluster to relocate hardware. The administrator upgrades NCC and runs health checks.
Which steps should the administrator perform next?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements.

Answer:

Explanation:

NEW QUESTION # 76
An administrator needs to create a new Linux image and will to do the following as part of the VM deployment:
* Set the OS hostname
* Add custom users
* Add keys
* Run custom scripts
What package needs to be installed in the Linux image to facilitate this automation?

• A. Sysprep
• B. CloudInit

Answer: B

NEW QUESTION # 77
Which two permission assignment tasks can be accomplished via Prism Element? (Choose two.)

• A. Grant a user permission to view details of all VMs on a specific cluster
• B. Grant a user permission to create and delete snapshots on a specific VM
• C. Grant an active directory group permission to perform back operations
• D. Grant a user permission to create VMs on a specific storage container

Answer: A,B

Explanation:
Prism Element is a management interface that allows administrators to assign permissions to users and groups on a per-cluster, per-VM, or per-storage container basis.
https://www.nutanix.com/content/dam/nutanix/resources/support/ncp-mci-ds.pdf

NEW QUESTION # 78
An administrator is reviewing performance of a core banking system that routinely has 20,000 concurrent users. During, business hours, the CPU on the applications servers runs at close to 100%. The administrator needs to determine if there is a performance issue specific to the app servers, the database servers, or all servers on the cluster.

Which metrics should the administrator review in Prism Analysis Graphs?

• A. Cluster IO, CPU, Memory and Database and App Server CPU
• B. Cluster IO, Network, Database and App Server CPU
• C. Cluster CPU and Memory Only
• D. Cluster IO, CPU, Memory, Network, App Server CPU

Answer: D

NEW QUESTION # 79
After logging into Prism Element, an administrator presses the letter A on the Keyboard.
What is the expected outcome of this input?

• A. About Nutanix page will launch
• B. Analysis will launch
• C. API Explorer page will launch
• D. Alerts page will launch

Answer: C

Explanation:
API Explorer page will launch when an administrator presses the letter A on the keyboard after logging into Prism Element. This is one of the keyboard shortcuts that Prism Element provides for accessibility and ease of use1. API Explorer is a tool that allows users to explore and test Nutanix REST APIs within Prism Element1.
https://www.nutanixbible.com/3b-book-of-prism-navigation.html

NEW QUESTION # 80
Refer to Exhibit.

An administrator increases the cluster RF to 3. The containers are not modified.
What will the new values in the data resiliency dashboard be for FAILURES TOLERABLE for the Zookeeper and Extent Groups components?

• A. Zookeeper = 2 and Extent Groups = 1
• B. Zookeeper = 2 and Extent Groups = 2
• C. Zookeeper = 1 and Extent Groups = 1
• D. Zookeeper = 1 and Extent Groups = 2

Answer: A

Explanation:
According to the web search results, the cluster redundancy factor (RF) determines how many copies of the cluster metadata and configuration data are stored on different nodes. By default, the cluster RF is 2, which means that there are three copies of the Zookeeper and Cassandra data on the cluster. If the cluster RF is increased to 3, then there will be five copies of the Zookeeper and Cassandra data on the cluster12. This means that the Zookeeper component can tolerate two failures, as it can still operate with a quorum of three nodes out of five3.
However, the container replication factor (RF) determines how many copies of the VM data and oplog are stored on different nodes. The container RF can be set independently for each container, and it can be different from the cluster RF. For example, a container can have RF 2 even if the cluster has RF 34. In this case, the container will only have two copies of the VM data and oplog on the cluster, regardless of the cluster RF. This means that the Extent Groups component can only tolerate one failure, as it needs at least one copy of the VM data and oplog to be available5.
Therefore, if the administrator increases the cluster RF to 3, but does not modify the containers, then the new values in the data resiliency dashboard will be Zookeeper = 2 and Extent Groups = 1.

NEW QUESTION # 81
A vDisk is read by multiple VMs. The cluster creates immutable copies of the vDisk. What are these vDisk copies called?

• A. Golden Images
• B. Volume Groups
• C. Shadow Clones
• D. Disk Clones

Answer: C

Explanation:
According to the Nutanix Support & Insights web search result3, shadow clones are vDisk copies that are created by the cluster when a vDisk is read by multiple VMs. Shadow clones are immutable copies of a vDisk that are stored in different nodes in the cluster, and are used to improve read performance and reduce network traffic. Shadow clones are automatically created and deleted by the cluster, based on the demand and availability of resources.

NEW QUESTION # 82
Refer to the exhibit.

An administrator is adding a new node to a cluster. The node has been imaged to the same versions of AHV and AOS that the cluster running, configured with appropriate IP addresses, and br0-up has been configured the same the existing uplink bonds When attempting to add the node to the cluster with the Expand Cluster function in Prism , the cluster is unable to find the new node.
Based on the above output from the new node, what is most likely the cause of this issue?

• A. There is a firewall blocking the discovery traffic from the tlu
• B. LACP configuration must be completed after cluster expansion
• C. The ports on the upstream switch are not configured for LACP.
• D. The existing and the expansion node are on different VLANs.

Answer: D

Explanation:
The correct answer is B. The existing and the expansion node are on different VLANs.
The output shows that the new node has a br0-up bond with four interfaces: eth0, eth1, eth2, and eth3. The bond is configured with LACP active and LACP fallback set to false. This means that the bond will only work if the upstream switch supports LACP and is configured to form an LACP group with the four interfaces. However, the output also shows that the bond has no IP address assigned to it, which indicates that the bond is not operational. One possible reason for this is that the existing and the expansion node are on different VLANs, and the upstream switch is not configured to allow the VLAN traffic on the LACP group. This would prevent the new node from communicating with the cluster and being discovered by the Expand Cluster function in Prism.
To verify this, the administrator can check the VLAN configuration on the upstream switch and compare it with the existing nodes. Alternatively, the administrator can use the "manage_ovs show_uplinks" command on an existing node and compare the output with the new node. If there is a VLAN mismatch, the administrator can either change the VLAN configuration on the switch or on the new node to match the existing nodes.

NEW QUESTION # 83
An administrator wants to ensure that data in a container is stored in the most space efficient manner as quickly as possible after being written, Which space efficiency too meets this requirement?

• A. Erasure Coding
• B. Cache Deduplication
• C. Thin Provisioning
• D. Inline Compression

Answer: D

Explanation:
inline compression is a technique that compresses all incoming write I/O operations over 4 KB inline in the persistent write buffer (oplog)23. This approach enables you to use oplog capacity more efficiently and helps drive sustained performance2. From AOS 5.18 onward, inline compression (compression delay=0) is enabled by default for all new containers24.
https://portal.nutanix.com/page/documents/solutions/details?targetId=TN-2032-Data-Efficiency:TN-2032-Data-Efficiency

NEW QUESTION # 84
An administrator wants to replace and old node with a node of newer generation in a 3-node cluster. The administrator has already chosen the appropriate node. But unable to remove it from the cluster.
Why is the Remove Host option not shown in the exhibit?

• A. It is not possible to remove a host from a 3-node cluster.
• B. The host needs to be placed into maintenance Mode before.
• C. It is only possible to remove a host from a cluster using CLI.
• D. It is not possible to remove a node from a the cluster using Prism Central

Answer: A

NEW QUESTION # 85
The administrator wants a container to be displayed and limited to 1TB in the hypervisor.
What advanced container setting must the administrator set?

• A. Reserved Quota
• B. Advertised Capacity
• C. Reserved Capacity
• D. Advertised Quota

Answer: B

Explanation:
According to the Nutanix Support & Insights web search result3, advertised capacity is an advanced container setting that allows the administrator to reserve an advertised storage space for a storage container. An advertised capacity setting gives the hypervisor a maximum storage size that the storage container can use.
This setting can be any arbitrary value greater than or equal to the resiliency required. The hypervisor ensures that the storage container storage doesn't go beyond the advertised capacity. If the administrator wants a container to be displayed and limited to 1TB in the hypervisor, they should set the advertised capacity to 1TB.

NEW QUESTION # 86
Which AOS process determine if an I/O from a user will be written to OpLog or to an Extent Store?

• A. Zeus
• B. Stargate
• C. Curtor
• D. Cassandara

Answer: B

NEW QUESTION # 87
Refer to the Exhibit:

An administrator is adding a new node to a cluster. The node has been imaged to the same versions of AHV and AOS that the cluster is running, configured with appropriate IP addresses, and br0-up has been configured in the same manner as the existing uplink bonds.
When attempting to add the node to the cluster with the Expand Cluster function in Prism, the cluster is unable to find the new node.
Based on the above output from the new node, what is most likely the cause of this issue?

• A. The ports on the upstream switch are not configured for LACP.
• B. There is a firewall blocking the discovery traffic from the cluster.
• C. LACP configuration must be completed after cluster expansion.
• D. The existing cluster and the expansion node are on different VLANs.

Answer: A

Explanation:
The output in the exhibit indicates that the node's network interfaces (eth0-eth3) are bonded together using LACP (Link Aggregation Control Protocol) with 'balance-tcp' as the bonding mode and LACP speed set to
'fast'. For LACP to function correctly, the switch ports to which the node is connected must also be configured to support LACP. If the ports on the upstream switch are not configured for LACP, the bond will not be able to establish properly, and the node will not communicate effectively on the network, making it undiscoverable when attempting to expand the cluster.
The absence of an operational LACP configuration could prevent the new node from joining the existing cluster as the node's network interfaces would not be able to pass traffic correctly. This can be verified by checking the switch configuration to ensure that the ports are set to participate in an LACP bond.
The other options, such as a firewall blocking discovery traffic (Option A) or the node being on different VLANs (Option C), are possible causes for a node not being discovered, but given the specific command output provided, the most likely cause is related to the switch port configuration for LACP. Option D, regarding completing LACP configuration after cluster expansion, is not correct because LACP needs to be operational for the node to communicate with the cluster during the expansion process.
Proper LACP configuration is critical for network communication in a Nutanix AHV cluster, and this is covered in detail in the Nutanix AHV and Networking documentation. It outlines the steps for configuring network bonds and LACP on both the AHV hosts and the connecting network infrastructure.

NEW QUESTION # 88
Which two access protocols are supported by Files? (Choose two.)

• A. ISCSI
• B. NFS
• C. FCOE
• D. SMB

Answer: B,D

Explanation:
According to the Network File System web search result3, NFS (Network File System) is a distributed file system protocol that allows a user on a client computer to access files over a network in a manner similar to how local storage is accessed. NFS is one of the access protocols supported by Files. According to the [MS-WPO]: File Access Services Protocols web search result4, SMB (Server Message Block) is a Windows file sharing protocol that enables applications to discover, access, and share files that are hosted on or made available by a file server, using a network between them, in a secure and managed environment. SMB is another access protocol supported by Files. Therefore, SMB and NFS are two access protocols supported by Files.

NEW QUESTION # 89
How will an HDD failure affect VMs with data on the failed device?

• A. The VMs will remain operational on that host and continue to function normally with no noticeable impact
• B. An HA event will occur, causing the affected VMs to restart on a node that contains the replica data.
• C. A live migration will be initiated, moving the affected VMs to a host that contains the replica data.
• D. The VMs will crash, and will be restarted once the failed HDD has been replaced and the data has been restored.

Answer: B

Explanation:
According to the Troubleshooting hosted disk I/O performance problems (1008885), when using VMware hosted products, consider that both the virtual machines and host operating system often share the same disk resources and hardware. If a hard disk fails, the virtual machines that have data on the failed device will experience an HA event, causing them to restart on a node that contains the replica data.

NEW QUESTION # 90
Which capability refers to the storage of VM data on the node where the VM is running and ensure that the read I/O does not have to traverse the network?

• A. Data Tiering
• B. Intelligent Locally
• C. Intelligent Tiering
• D. Data Locality

Answer: D

NEW QUESTION # 91
A customer wants to isolate a group of VMs within their Nutanix environment for security reasons. The customer creates a VM with two NICs to act as a firewall and installs the appropriate software and certificates.
However, no one from the outside can access the application.
What is the likely cause of this problem?

• A. Wireshark is installed on the NAT VM
• B. A shared volume group must be used by all isolated VMs
• C. One of the NICs needs to be configured on the internal VLAN
• D. More than one NIC cannot be added to a VM

Answer: C

Explanation:
One of the NICs needs to be configured on the internal VLAN. This is because the VMs that are isolated need to communicate with the firewall VM through a private network, and the firewall VM needs to communicate with the external network through a public network. The internal VLAN is a logical network that can be created and managed by AHV1. If the firewall VM does not have a NIC on the internal VLAN, it will not be able to route traffic between the isolated VMs and the outside world.

NEW QUESTION # 92
Refer to the exhibit.

An administrator is trying to implement the solution that is shown in the exhibit, but has been unsuccessful.
Based on the diagram, what is causing the issue?

• A. A remote Witness VM
• B. Active containers in both sites
• C. Network latency
• D. Unsupported hypervisor

Answer: C

Explanation:
The correct answer is C. Network latency.
The diagram shows a solution that uses synchronous replication between two remote protection domains, cluster site A and cluster site B. Synchronous replication is a feature that allows near-zero RPO (recovery point objective) by replicating data to the remote site before acknowledging writes to the local site. However, synchronous replication has some requirements and limitations that must be met for it to work properly. One of these requirements is that the network latency between the two sites must be less than or equal to 5 ms1. If the network latency is higher than 5 ms, the synchronous replication will fail and the protection policy will be suspended2.
Therefore, based on the diagram, the most likely cause of the issue is that the network latency between cluster site A and cluster site B is higher than 5 ms, which prevents the synchronous replication from working. To verify this, the administrator can use the "ncli cluster ping" command to measure the network latency between the two sites3. If the network latency is indeed higher than 5 ms, the administrator can either improve the network performance or switch to a different replication mode, such as near-synchronous or asynchronous.

NEW QUESTION # 93
Where are Leap Availability Zones configured?

• A. Prism Central
• B. Controller VM
• C. Cloud Connect
• D. Prism Element

Answer: A

Explanation:
Terminology
Availability Zone - it is represented by all resources (Nutanix Clusters) connected to Prism Central or Xi Leap Availability zone. Depends on the architecture, Availability zone can represent geographic territory, datacenter or server room in the datacenter. Protection policies - in protection policies you set up (RPO, Retention), rules to auto-apply policies to virtual machines
https://vmwaremine.com/2019/02/08/nutanix-leap-runbooks-part-1/#sthash.VwrzSzhQ.dpbs

NEW QUESTION # 94
An administrator needs to create a new Linux image and will to do the following as part of the VM deployment:
* Set the OS hostname
* Add custom users
* Add keys
* Run custom scripts
What package needs to be installed in the Linux image to facilitate this automation?

• A. NGT
• B. Sysprep
• C. Kickstart
• D. CloudInit

Answer: D

Explanation:
CloudInit is a package that contains utilities for early initialization of cloud instances. It allows you to customize virtual machines provided by a cloud vendor by modifying the generic OS configuration on boot. You can use CloudInit to set the OS hostname, add custom users, add keys, run custom scripts, and more2. CloudInit is supported by most major Linux and FreeBSD operating systems and works across different cloud platforms3. Sysprep is a tool for Windows operating systems that prepares an installation for cloning, auditing, and customer delivery4.
References: 1: Replacing Nodes in Nutanix Cluster - Nutanix Support & Insights 2: Customize a Linux VM with cloud-init in Azure - Azure Virtual Machines 3: Cloud-Init - The standard for customising cloud instances 4: Sysprep (Generalize) a Windows installation

NEW QUESTION # 95
Refer to the exhibit.

Which two initial cluster configuration tasks were missed during the deployment process? (Choose two.)

• A. CVM password changes
• B. Password policy changes
• C. BIOS password changes
• D. Host password changes

Answer: A,D

Explanation:
According to the image description, the exhibit shows a screenshot of a computer screen with a table of data. The table has 6 columns and 4 rows. The columns are labeled "Date", "Time", "Status", "Details", "Configuration", and "Duration". The rows contain information about different configurations and their statuses. The background is a light blue color. There is a pop-up message on the bottom right corner of the screen that reads "This question has been answered. Click here to enable the edit button." Based on the table data, it seems that the screenshot is taken from the Prism Central web console, showing the results of a cluster health check report. The report shows that there are four failed checks: Host Password Policy, CVM Password Policy, NTP Configuration, and Cluster Time Skew2. These checks indicate that some initial cluster configuration tasks were missed during the deployment process.
The Host Password Policy check verifies that the host passwords are not set to default values and are compliant with the password policy defined in Prism Central3. The CVM Password Policy check verifies that the CVM passwords are not set to default values and are compliant with the password policy defined in Prism Central4. These checks are important for ensuring the security and compliance of the cluster. Therefore, changing the host and CVM passwords from their default values and following the password policy guidelines are two initial cluster configuration tasks that were missed.

NEW QUESTION # 96
......

Get NCP-MCI-6.5 Actual Free Exam Q&As to Prepare Certification: https://www.testsimulate.com/NCP-MCI-6.5-study-materials.html