[Full-Version] 2022 New TestSimulate NCS-Core PDF Recently Updated Questions
NCS-Core Exam with Guarantee Updated 195 Questions
NEW QUESTION 47
An administrator protected a DB VM running on a Nutanix cluster with NearSync Replication, which schedules to repeat every 15 minutes to a second site. The daily change rate is low. During nightly backups, the replication window is missed due to write volume.
Which two options describe the expected behavior? (Choose two.)
- A. NearSync stops working and fails over to the remote site.
- B. The system continuously tries to get to the NearSync schedule.
- C. Protection Domain transitions back to the hourly schedule.
- D. The Administrator needs to re-enable it manually.
Answer: A,B
NEW QUESTION 48
A customer wants to use NIC teaming on an ESXi host using a vSphere Standard Switch configured with the Route based on physical NIC load load balancing option. The customer does not see the option when editing the Teaming and Failover settings for the switch.
How should the consultant resolve this issue?
- A. Add another physical NIC to the team.
- B. Install a vCenter server to manage the switch
- C. Change the load balancing option on the switch.
- D. Add a vSphere Distributed Switch
Answer: D
NEW QUESTION 49
The following alert appears on the file server alerts tab in the file server dashboard:
Which two events can generate this alert? (choose two)
- A. A node failed in a three-node cluster.
- B. A node is set to the maintenance mode in a three node cluster.
- C. A Nutanix file with four hie server VMs is deployed on a three-node duster.
- D. A three-node dusterhosting the file server is undergoing AOS upgrade.
Answer: B,D
NEW QUESTION 50
Refer to the exhibit.
An administrator creates a security policy that isolates their financial application from accessing the Internet When viewing the policy in Prism Central, several connections from the application are outbound to the Internet.
What is causing this issue with the policy?
- A. The 0.0.0.0 address was not specified in the outbound rule.
- B. The Activate box was not checked in the rule, so it is not enforcing.
- C. The blockedconnections are illustrated for information only.
- D. The policy has been left in monitor mode instead of enforcing mode.
Answer: D
Explanation:
Explanation
https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v510:mul-security-polic
NEW QUESTION 51
An administrator needs to relocate an AHV cluster to a new datacenter during a maintenance window. The cluster will use the same IPs in the new datacenter.
Which two steps should be taken to prepare forthis task? (Choose two.)
- A. Reconfigure IPMI for the new datacenter
- B. Shut down all user VMs in the cluster
- C. Stop all Nutanix Files clusters
- D. Relocate the linked LDAP servers
Answer: B,C
Explanation:
Explanation
Ref:https://next.nutanix.com/installation-configuration-23/physical-relocation-of-nutanix-clusters-38403
NEW QUESTION 52
A customer has two mission-critical applications and needs to have them backed up to a remote location. The remote location is connected using a leased line and has an average latency of 7 ms.
Which Nutanix technology will provide the shortest RPO possible?
- A. NearSync
- B. Metro Availability
- C. Leap
- D. Asyn&DR
Answer: C
Explanation:
Explanation
Ref:https://portal.nutanix.com/page/documents/solutions/details?targetId=BP-2005_Data_Protection:BP-2005_D
NEW QUESTION 53
A customer is running out of storage in an ESXi cluster. The customer wants to add storage without paying for an additional hypervisor license.
Which option should the consultant recommend to meet the requirement?
- A. Buy a new node to meet the requirements of the storage-only node specifications.
- B. Select the storage-only checkbox during Foundation and then expand the cluster in Prism.
- C. Convert the cluster to AHV to support storage-only node requirements.
- D. Edit the factory_config.json file to configure the node as storage-only and then expand the cluster in Prism
Answer: A
NEW QUESTION 54
Refer to the exhibit.
User 1 and User 2 belong to the AAPM group
What are two descriptions of how Files perform quota management? (Choose two.)
- A. User 2 can add an 8GB file without receivinga notification email.
- B. User 1 can add an 8GB file to the share without receiving notification.
- C. User 1 can continue to add another 5GB file but will receive a daily notification email.
- D. User 2 can continue to add another 3GB file butwill receive a daily notification email.
Answer: A,C
Explanation:
Explanation
Ref:https://portal.nutanix.com/page/documents/details?targetId=Files-v3_6:fil-file-server-quotas-c.html#nconcep
NEW QUESTION 55
An administrator needs to deploy an application with a large amount of data connected via Nutanix Volumes.
Which two actions should the administrator take when designing the Volume Group? (Choose two.)
- A. Distribute workload across multiple virtual disks
- B. Enable RSS (Receive Side Scaling)
- C. Use multiple subnets for iSCSI traffic
- D. Enable thick provisioning on the Volume Group(s)
Answer: A,B
Explanation:
NEW QUESTION 56
An administrator has a custom backup application that requires a 2TB disk and runs in Windows. Throughput is considerably lower than expected.
The application was installed on a VM with the following configuration:
* Four vCPUs with one core/vCPU
* 4GB of Memory
* One 50GB vDisk for the Windows installation
* One 2TB vDisk for the application
What is the recommended configuration change to improve throughput?
- A. Increase the number of cores per vCPU
- B. Add 4GB of memory to the VM
- C. Increase the vCPUs assigned to the VM
- D. Span the 2TB disk across four vDisks
Answer: D
NEW QUESTION 57
A consultant needs to verify the make and model of the systems that will be imaged with Foundation. The consultant does not have the Bill of Materials (BOM) available to review.
When should the consultant verify the make and model to prepare for the cluster deployment?
- A. When reviewing the Statement of Work (SOW)
- B. While conducting the Tech Review Call
- C. During the Foundation Process
- D. Upon arriving on-site
Answer: C
NEW QUESTION 58
After installation, network ports are properly configured with the default active-backup bonding.
One 10GbE port goes to switch 1. Another 10GbE port goes to switch 2. A consultant tests failover by manually pulling one of the cables and notices it is taking too much time to failover, which is causing excessive packet loss.
What should the consultant enable to resolve this issue?
- A. PAgP
- B. Jumbo frames
- C. LACP on switch
- D. Portfast
Answer: D
NEW QUESTION 59
A consultant is performing a Nutanix Cluster installation on Dell XC Core hardware. The consultant decides to use Foundation Portable for Mac to perform the installation. When the consultant arrives onsite, Foundation Portable is unable to locate the new nodes.
Which log should the consultant check to troubleshoot this issue?
- A. /home/nutanix/foundation/log
- B. ~/data/logs/foundation
- C. foundation.app/contents/resouces/log
- D. ~/data/logs/foundation.out
Answer: A
NEW QUESTION 60
An administrator needs to install prism central for their 2550 multi-cluster environment.
How should they deploy the application?
- A. Deploy a small 1-VM Prism Central instance.
- B. Deploy a large 3-VM Prism Central instance
- C. Deploy a large 1-VM Prism Centralinstance.
- D. Deploy a small 3-VM Prism Central instance.
Answer: B
NEW QUESTION 61
A consultant is preparing to foundation over a customer network that has the following criteria:
* VLAN segmented network
* VLAN tags on the nodes must be imaged prior to starting the foundation process.
For each node, the consultant has done the following:
* Connected to the Network Crash Cart of the Node
* Logged in using "root" credentials
What should the consultant do next?
- A. 1. CD to /root/nutanix-network-crashcart/
2. Start Network Utility tool by running: ./network_configuration
3. Change Values - B. 1. Log into CVM using [email protected]
2. CD to /home/data/nutanix/nutanix-network-crashcart/
3. Start Network Utility tool by running: ./network_configuration
4. Change Values - C. 1. Log into CVM using [email protected]
2. CD to /root/Nutanix-network-crashcart/
3. Start Network Utility tool by running: ./network_configuration
4. Change Values - D. 1. CD to /home/data/nutanix/nutanix-network-crashcart/
2. Start Network Utility tool by running: ./network_configuration
3. Change Values
Answer: A
NEW QUESTION 62
......
Latest NCS-Core Pass Guaranteed Exam Dumps Certification Sample Questions: https://www.testsimulate.com/NCS-Core-study-materials.html