Free CWNP (CWT-101) Certification Sample Questions with Online Practice Test
CWT-101 Certification Study Guide Pass CWT-101 Fast
CWNP CWT-101 Exam Certification Details:
| Duration | 90 minutes |
| Exam Price | $150 USD |
| Number of Questions | 60 |
| Exam Code | CWT-101 CWT |
| Passing Score | 70% |
| Recommended Training | Live Training Class Self-Paced Training Kit Study and Reference Guide Electronic Practice Test eLearning Module eLearning Bundle |
| Exam Registration | PEARSON VUE |
| Sample Questions | CWNP CWT-101 Sample Questions |
NEW QUESTION # 19
What antenna would be best for a long distance (more than 5 kilometers) bridge link?
- A. Omnidirectional
- B. Parabolic dish
- C. Panel
- D. Patch
Answer: B
NEW QUESTION # 20
What is the maximum channel width supported by 802.11ac (VHT) in the standard?
- A. 80 MHz
- B. 20 MHz
- C. 40 MHz
- D. 160 MHz
Answer: D
NEW QUESTION # 21
Which configuration option allows control over the transmit power of an 802.11 AP?
- A. Operational modes
- B. PHY and frequency band support
- C. Single-band vs. dual-band
- D. Output power control
Answer: D
NEW QUESTION # 22
What can be configured in some client devices to encourage them to use 5 GHz APs whenever they are available?
- A. Roaming aggressiveness
- B. Gaming mode
- C. Band selection
- D. Band preference
Answer: D
NEW QUESTION # 23
When three APs are placed within ten meters of each other and use the same channel, but are not Single Channel Architecture (SCA) APs, what problem will be exaggerated?
- A. ACI
- B. Antenna misalignment
- C. CCI
- D. Non-Wi-Fi interference
Answer: C
NEW QUESTION # 24
Which device type is primarily designed for voice communication and mobile internet access?
- A. Tablets
- B. Desktops
- C. Laptops
- D. Mobile phones
Answer: D
NEW QUESTION # 25
What is the term used to describe the interference caused when multiple devices compete for the same channel in RF communication?
- A. Co-Channel Contention (CCC)
- B. Co-Channel Interference (CCI)
- C. Antenna pattern charts
- D. Antenna cables and connectors
Answer: A
NEW QUESTION # 26
Which component of a wireless device needs to be configured for optimum performance, such as band preference and regulatory domain?
- A. Transmit power
- B. Client drivers
- C. Supported channels
- D. Channel widths
Answer: B
NEW QUESTION # 27
What are the regulatory constraints that may limit the selection of specific channels for RF communication?
- A. Regulatory constraints on channel selection
- B. Co-Channel Interference (CCI) and Co-Channel Contention (CCC)
- C. Available channels by protocol
- D. Best practices for channel selection
Answer: A
NEW QUESTION # 28
What type of interference occurs when multiple devices contend for the same channel in a wireless network?
- A. Configuration errors
- B. Co-channel contention (CCC)
- C. Low data rates
- D. Interference
Answer: B
NEW QUESTION # 29
What kind of AP mounting kit is most likely to use U-brackets?
- A. Pole/mast mount
- B. Wall mount
- C. Desktop mount
- D. Ceiling mount
Answer: A
NEW QUESTION # 30
What process is used after authentication to generate and install encryption keys on 802.11 devices using WPA2?
- A. 802.1X port-based authentication
- B. 4-way handshake
- C. EAP authentication
- D. Passphrase to PSK mapping algorithm
Answer: B
NEW QUESTION # 31
Which operating system is commonly used on Apple devices such as iPhones and iPads?
- A. macOS
- B. iOS
- C. Chrome OS
- D. Windows
Answer: B
NEW QUESTION # 32
What is the term used to describe the decrease in signal strength as an RF signal propagates through space?
- A. Gain and loss
- B. Free space path loss
- C. Reflection
- D. Refraction
Answer: B
NEW QUESTION # 33
What is the term used to describe the software component responsible for authenticating and connecting to a wireless network?
- A. Configuration errors
- B. Supplicant
- C. Interference
- D. Feature incompatibility
Answer: B
NEW QUESTION # 34
What kind of antenna chart shows the radiation pattern of an antenna from the side view of that antenna?
- A. Top-down
- B. Elevation
- C. Horizontal
- D. Azimuth
Answer: D
NEW QUESTION # 35
What is the term used to describe the minimum signal strength required by a device to successfully receive wireless communication?
- A. Receive sensitivity
- B. Transmit power
- C. Supported channels
- D. Channel widths
Answer: A
NEW QUESTION # 36
Which management interface allows configuration of an 802.11 AP through a web browser?
- A. SNMP (Simple Network Management Protocol)
- B. Remote CLI
- C. CLI (Command Line Interface)
- D. Web-based
Answer: D
NEW QUESTION # 37
What 802.11 process must always occur before 802.11 association?
- A. Time synchronization
- B. Authentication
- C. Confidentiality
- D. Encryption
Answer: B
NEW QUESTION # 38
......
CWNP CWT-101 Exam Topics:
| Section | Objectives |
|---|---|
Basic RF Characteristics (15%) | |
| Describe RF signal characteristics | - Frequency - Amplitude - Phase - Wavelength |
| Explain RF behaviors and signal propagation | - Gain and loss - Reflection - Refraction - Scattering - Free space path loss |
| Understand how to detect RF signal factors | - Wireless scanner tools - Client signal strength reports - RSSI vs. dBm - Output power vs. received signal strength |
| Understand basic RF channel plans | - Available channels by protocol - Regulatory constraints on channel selection - Best practices for channel selection - Co-Channel Interference (CCI) and Co-Channel Contention (CCC) |
| Describe the basic differences among antenna types | - Omnidirectional - Semi-directional - Highly directional - Antenna mounting kits |
| Use the appropriate external antenna when required | - Antenna pattern charts - Antenna cables and connectors - Passive antenna gain |
Wireless Device Features and Capabilities (25%) | |
| Describe device types and varying capabilities | - Laptops - Tablets - Mobile phones - Desktops - Specialty devices (video cameras, Wi-Fi peripheral connections, printers, IoT, etc.) |
| Explain the basic WLAN location processes for 802.11 wireless networks | - Passive scanning - Active scanning |
| Describe the basic steps required in the WLAN connection process for 802.11 wireless networks | - Authentication - Association - 802.1X/EAP authentication - 4-way handshake |
| Determine the RF features supported by client and IoT devices | - Supported channels - Channel widths - Transmit power - Receive sensitivity |
| Configure client and IoT devices | - Configure client drivers for optimum performance (band preference, roaming threshold, regulatory domain, etc.) for 802.11 devices
- Configure various IoT devices based on the supported protocol
|
Wireless Protocol Features and Capabilities (25%) | |
| Identify 802.11 AP features and capabilities and understand configuration options related to them | - PHY and frequency band support - Single-band vs. dual-band - Output power control - Operational modes - Multiple-SSID support - Guest access - Security features - Management interfaces (web-based, CLI, remote CLI) - Internal and external antennas - PoE support |
| Use appropriate 802.11 AP mounting kits for a specified installation location | - Wall mount - Pole/mast mount - Ceiling mount |
| Ensure proper PoE provisioning for 802.11 APs and other wireless devices, when required | - Power levels required - PoE switches - PoE injectors - Testing power availability |
Get Perfect Results with Premium CWT-101 Dumps Updated 140 Questions: https://www.testsimulate.com/CWT-101-study-materials.html