Free 2021 NetApp NCSIE ONTAP NS0-183 dumps are available on Google Drive shared by TestSimulate

Welcome to download the newest TestSimulate NS0-183 PDF dumps: https://www.testsimulate.com/NS0-183-study-materials.html ( 145  Q&As)

NEW QUESTION 21
Click the Exhibit button.

Your ONTAP cluster shows the cluster network errors that are shown in the event log.
What is used by ONTAP software to log the errors that are shown in the exhibit?

• A. EMS
• B. AutoSupport
• C. SNMP
• D. BGP

Answer: A

 

NEW QUESTION 22
You are installing a 4-node AFF A400 cluster and are asked to create a custom security message before and after user login.
Which two security features are used to perform this task? (Choose two.)

• A. motd
• B. AutoSupport
• C. EMS
• D. banner

Answer: B,D

 

NEW QUESTION 23
You need to install a cluster with a FAS2720 HA pair and a FAS8300 HA pair.
Which NetApp tool will verify which cluster interconnect switches support this configuration?

• A. Active IQ Config Advisor
• B. Interoperability Matrix Tool (IMT)
• C. Hardware Universe (HWU)
• D. mysupport.netapp.com site

Answer: C

 

NEW QUESTION 24
Which type of partitioning would you use when installing a FAS8200 with 24 SAS drives running ONTAP 9.5?

• A. root-root-data-data partitioning
• B. root-data-data partitioning
• C. root-root-data partitioning
• D. root-data partitioning

Answer: D

 

NEW QUESTION 25
You are adding new controllers to an existing cluster. As part of the upgrade process, you have updated the BES-53248 cluster switches.
In this scenario. Which two commands would you use to verify a healthy cluster after the upgrade? (Choose two.)

• A. network port show -ipspace Cluster
• B. network interface show -vserver Cluster -fields auto-revert
• C. network interface show -vserver Cluster
• D. network device-discovery show -protocol cdp

Answer: A,C

 

NEW QUESTION 26
You are installing a new AFF A400 cluster for a customer. The customer indicates that they want to take advantage of AutoSupport On Demand.
In this scenario, which AutoSupport transport protocol must you use?

• A. FTP
• B. HTTPS
• C. HTTP
• D. SMTP

Answer: B

Explanation:
Explanation/Reference: https://www.netapp.com/media/10438-tr-4444.pdf (9)

 

NEW QUESTION 27
You have a 6-node ONTAP 9.1 cluster with two FAS6290 nodes and four FAS8080 EX nodes using a SAN protocol.
In this scenario, how many FAS9000 HA pairs would be joined to this cluster?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: C

 

NEW QUESTION 28
You have an AFF All SAN Array (ASA) cluster that is running ONTAP 9.7. The cluster is configured for Active Directory domain controller access using a domain tunnel.
In this scenario, which two licenses are enabled on the cluster? (Choose two.)

• A. iSCSI
• B. NVMe
• C. FCP
• D. CIFS

Answer: C,D

 

NEW QUESTION 29
What is the default shelf ID for disk shelves with IOM12 modules?

• A. 01
• B. 00
• C. 0
• D. 1

Answer: B

 

NEW QUESTION 30
You are installing a new AFF A400 cluster and need to access the cluster management LIF from a remote subnet with the fully qualified domain name (FQDN) a400.lab.netapp.com.
In this scenario, which two network components must be configured to log in to ONTAP System Manager from the remote subnet? (Choose two.)

• A. NTP
• B. VLAN
• C. route
• D. DNS

Answer: C,D

 

NEW QUESTION 31
Which hot-swappable transceiver is required to obtain full performance from a Cisco Nexus 3232C cluster-interconnect switch?

• A. QSFP28
• B. SFP+
• C. SFP
• D. QSFP+

Answer: A

 

NEW QUESTION 32
Which statement regarding Epsilon is true?

• A. The epsilon acts as a tiebreaker in a 2-node cluster.
• B. The node holding the epsilon has extra fractional vote weight.
• C. Whenever a new node is added, the epsilon is automatically reassigned to this node.
• D. Epsilon is reassigned automatically to the HA partner in case the current owner of the epsilon suddenly reboots.

Answer: B

 

NEW QUESTION 33
You are a NetApp Professional Services engineer, employed by NetApp. You have just completed an ONTAP cluster installation. You need to collect the relevant configuration information to enable the Service Event Report (SER) to be created.
Which tool would you use to accomplish this task?

• A. NetAppDocs output report
• B. ONTAP System Manager
• C. Active IQ scheduled reports
• D. Active IQ Config Advisor worksheet

Answer: C

 

NEW QUESTION 34
What are two reason why automatic giveback fails? (Choose two.)

• A. SAN sessions are established.
• B. Storage failover is disabled.
• C. The disk shelf is too hot.
• D. NFS sessions are established.

Answer: B,C

 

NEW QUESTION 35
After a system panic, the NetApp Support team advises you to run the sldiag command.
Which two actions must be performed before you use this command? (Choose two.)

• A. At the storage system prompt, type boot_maintenance.
• B. At the LOADER prompt, type boot_diags.
• C. At the storage system prompt, type halt.
• D. At the LOADER prompt, type boot_maintenance.

Answer: B,C

 

NEW QUESTION 36
You are installing a new AFF A400 cluster for a customer. The customer indicates that they want to take advantage of AutoSupport On Demand.
In this scenario, which AutoSupport transport protocol must you use?

• A. FTP
• B. HTTPS
• C. HTTP
• D. SMTP

Answer: B

 

NEW QUESTION 37
After properly cabling the NetApp CN1610 cluster switches, you see that joining the second node to a cluster fails because the node is not able to communicate with the other node.
In this scenario, what is causing this problem?

• A. The NTP server is not set.
• B. CN1610 is unsupported in newer ONTAP versions.
• C. The RCF file is not loaded properly.
• D. The cluster switches must be Cisco for more than two nodes in a cluster.

Answer: C

 

NEW QUESTION 38
You have just finished installing and configuring an ONTAP cluster for a customer.
In this scenario, which product collects information and produces site documentation?

• A. Active IQ OneCollect
• B. Inventory Collect Tool
• C. SnapGathers
• D. NetAppDocs

Answer: D

 

NEW QUESTION 39
Which three components are required when setting up a new ONTAP cluster? (Choose three.)

• A. node management IP
• B. intercluster IP
• C. cluster management IP
• D. Advanced Drive Partitioning
• E. password

Answer: A,B,C

 

NEW QUESTION 40
Click the Exhibit button.

You are reviewing the setup of a recently installed FAS9000 switched cluster. As shown in the exhibit, the cluster interconnects are connected to a pair of Cisco Nexus 3132Q-V 40 Gb ports.
For a high availability, which ports should swap Ethernet cables?

• A. Swap node2:e4a and node2:e8a.
• B. Swap node1:e4a and node2:e4b.
• C. Swap node1:e4a and node1:e8a.
• D. Swap node1:e8a and node2:e4a.

Answer: A

 

NEW QUESTION 41
You are asked to add a new HA pair to an existing 2-node switchless AFF A220 cluster. You must first convert to a 2-node switched cluster using Broadcom BES-53248 cluster switches.
Which two conditions must be fulfilled before you start the migration? (Choose two.)

• A. All cluster LIFs must be in the up state and on their home ports.
• B. The "Enabled Switchless Cluster" option must be manually set to "false".
• C. All cluster LIFs must have an MTU size of 1500.
• D. The 2-node switchless configuration must be properly set up and functioning.

Answer: A,D

 

NEW QUESTION 42
You are installing a new FAS2750 cluster with 24 HDDs for a customer to run a NAS workload. The customer requests that the HA pair have only a single aggregate that is located on Node 1. Maximum capacity is required.
Which action must be performed to ensure that the customer's requests are satisfied?

• A. Assign all the data partitions from Node 2 to Node 1, and create a single aggregate.
• B. Assign all the partitioned disks from Node 2 to Node 1, and create a single aggregate.
• C. Assign all data LIFs to Node 1.
• D. Perform a takeover of Node 2 to ensure that it does not run.

Answer: C

 

NEW QUESTION 43
You configured AutoSupport and are trying to send a full AutoSupport message to NetApp.
You use the autosupport history showcommand and see the output shown in the exhibit.

The customer confirms that the AutoSupport settings are correct.
Which two actions will solve this issue? (Choose two.)

• A. The customer needs to white-list the two nodes on their mail server.
• B. The customer needs to change the transport protocol to HTTP.
• C. The customer needs to exclude the two nodes from the attachment-size limitation.
• D. The customer needs to enable AutoSupport for both nodes.

Answer: A,D

 

NEW QUESTION 44
When completing a new ONTAP 9.5 cluster base installation, which three SVM types will be present on the system by default? (Choose three.)

• A. data SVM
• B. node SVM
• C. admin SVM
• D. cluster SVM
• E. system SVM

Answer: B,C,E

 

NEW QUESTION 45
......

Tested Material Used To NS0-183: https://www.testsimulate.com/NS0-183-study-materials.html