[Dec-2021] Pass VMware 5V0-41.20  Tests Engine pdf - All Free Dumps

VMware SD-WAN Troubleshoot Practice Tests 2021 | Pass 5V0-41.20 with confidence!

NEW QUESTION 12
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed thatduring certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.

Users at the Dallas Branch are complaining that downloads/uploads from Office365 are slow. Working in Teams has been providing slow responses. The Internet circuit is 100Mbps while the MPLS Circuit is
45Mbps. Upon troubleshooting, the network administrator has noticed the traffic is Backhauling through the Seattle hub for all internet traffic.
How should the network administrator resolve the issue?

• A. Leave the system as is, the gateways will resolve the issues after doing 15 minutes of link qualification.
• B. Leave the system as is, the hubs will auto-rebalance tunnels after doing 15 minutes of link qualification.
• C. Advertise public routes to Office365 and Teams through the New York Hub.
• D. Prevent the hub from advertising a default route.

Answer: C

 

NEW QUESTION 13
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.

A network administrator decides to deploy a local Checkpoint VNF appliance on the Edge in London to cut back on unnecessary traffic towards the NY hub location.
The Checkpoint VNF and associated security services were successfully deployed at the London Branch.
Users are now are complaining that Webpages are extremely slow to load, just like before.
What should the administrator do?

• A. Disable and redeploy the VNF with lower memory requirements.
• B. Reboot the Edge, as this is a requirement in the deployment of a Security VNF.
• C. Verify to see if a firewall rule in the Edge is set to allow traffic to the Checkpoint VNF.
• D. Check the flow records in Remote Diagnostics.

Answer: A

 

NEW QUESTION 14
Scenario 3:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.

Users at a remote office are complaining about poor performance with certain applications. The network administrator has already verified the configuration is correct.
Which two parameters should the administrator review to troubleshoot this issue? (Choose two.)

• A. Change the bandwidth measurement under WAN Overlay Advanced Settings
• B. Check the flows to verify which Business Policy the traffic of interest is matching
• C. Look under Monitor, check Business priority tab
• D. Check the underlay network (bandwidth, latency, jitter, packet loss)

Answer: C,D

 

NEW QUESTION 15
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

The SD-WAN Edge at this location has been activated. It is incapable of establishing any overlay tunnels. Due to this being an internet only branch, no underlay connectivity is present to the hubs. The SD-WAN Edge is connected behind a firewall and the security team states that all necessary ports are open.
How can this issue be resolved?

• A. The security team need to open TCP port 2426 outbound but not inbound.
• B. The security team needs to open TCP port 22 instead of TCP port 2426.
• C. The security team needs to open TCP port 4500 instead of TCP port 2426.
• D. The security team needs to open UDP port 2426 outbound and inbound.

Answer: C

 

NEW QUESTION 16
Scenario 2:
After completing the branch activation activities for ail required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certconfigurations have been complete. The administrator also observed that several reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure thatall sites can talk to each other and all resources are accessible.
Exhibit.

A network administrator has been told that Dallas needs some high-availability in the event that the SD-WAINJ Edge goes offline for whatever reason. There is limited budget so the administrator must use the other available CE router as a fallback mechanism. The administrator will use VRRP to provide HA. When configuring VRRP, the SD-WAN Edge service restarted.
What caused this behavior?

• A. The device is faulty and will need a replacement.
• B. The administrator failed to specify the Edge Type as a VeloCloud Active Standby Pair.
• C. The administrator failed to specify the Edge Type as a VeloCloud Cluster.
• D. This is an expected behavior.

Answer: D

 

NEW QUESTION 17
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

A network administrator decides to deploy a local Checkpoint VNF appliance on the Edge in London to cut back on unnecessary traffic towards the NY Hub location. While attempting to deploy the VNF, the process keeps failing.
Where can the administrator check to see more detail?

• A. VCO > Monitor > Events
• B. VCO > Monitor > Logging
• C. VCO > Test & Troubleshoot > Remote Actions > Alerts
• D. VCO > Test & Troubleshoot > Remote Diagnostics > Events

Answer: B

 

NEW QUESTION 18
Scenario 1:
A network administrator is tasked with enabling SO-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is an Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
After the network administrator has determined the problem with the Edge not being able to access the Internet, the administrator receives another error stating that the SD-WAN Orchestrator is still not reachable.
The VCO's address is Amer-vcoOl.velocloud.net.
Refer to the Exhibit(s).


What might be disallowing the Edge to communicate with the Orchestrator?

• A. The local firewall that the Edge uses to reach externally is blocking UDP Port 53 in both directions.
• B. The SD-WAN Orchestrator specified is incorrect, and a new activation email needs to be sent.
• C. The SD-WAN Orchestrator is not being resolved for DNS.
• D. The SD-WAN Orchestrator has a limited 60-second window for the Edge to come online.

Answer: D

 

NEW QUESTION 19
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

A network administrator has received an email from the applications development team requesting connectivity to their AWS VPC.
The administrator has configured the tunnel via the VMware SD-WAN Gateway. The tunnel status icon has not turned green.
Where are two places the administrator must check? (Choose two.)

• A. Determine if the NVS has been enabled and assigned to a profile.
• B. Determine if the DH parameter on the Edge has been configured.
• C. Determine if the PSK is mismatched between the AWS side and the VeloCloud Gateway.
• D. Determine if the PSK is mismatched between the AWS side and the VeloCloud Edge.

Answer: C,D

 

NEW QUESTION 20
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

Users at the London site are complaining of various intermittent issues around websites not loading, or applications being remotely accessed disconnecting sporadically and reconnecting after a few minutes. The network administrator does not see anything strange on the Edge overview page and decides to check if the CPU or memory have been hitting close to 100%.
Where should the administrator verify this information?

• A. In the VCO > Monitor > Click London_Site01 > Click the System Tab
• B. In the VCO > Remote Troubleshooting > Remote Actions > System Status
• C. In the VCO > Monitor > Alerts
• D. In the VCO > Test 8c Troubleshoot > Remote Diagnostics > System Status

Answer: A

 

NEW QUESTION 21
Scenario 1:
A network administrator is tasked! with enabling SO-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites- One is an Internet-only site and two are Hybrid locations with both internet and MPLS: The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
Exhibit.

An administrator is attempting to activate two Edge devices at the Chicago branch location. The local technician reports that the Edge devices are not coming online. The Edge devices have been plugged in, powered on, and connected to the correct circuits with an Enhanced HA setup.
What should the local technician check first when troubleshooting the issue?

• A. Verify the link light sequence of the HA ports.
• B. Review the Orchestrator for HA misconfiguration issues.
• C. Review color of the LED.
• D. Verify beep sequence of the Edge devices.

Answer: A

 

NEW QUESTION 22
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that callquality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Users at multiple branches complain that a highly performant SQL Database cluster residing at the New York Data Center is not responding to database queries or inserts as expected. It is affecting the order management site. A network administrator investigates and finds that traffic from the branches are going through Seattle to reach the SQL Cluster in New York. The design for this SD-WAN network does not call for routing security.
The SQL Cluster is reachable through either Data Center, but for performance reasons, must flow through the New York DC. The network administrator has verified that the routes are not present in the OFC and the BGP neighborship is down in Network Services.
Refer to the Exhibit(s).
Exhibit.


What should the administrator verify?

• A. The BGP Authentication matches on both sides.
• B. The BGP configuration has a filter in place to deny the prefix in Seattle.
• C. The BGP configuration has a filter in place to deny the prefix in New York.
• D. Backhauling through the Seattle DC is disabled.

Answer: D

 

NEW QUESTION 23
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

A network administrator is investigating connectivity issues between Chicago and San Jose. The administrator browses to the Overlay Flow Control (OFC) window and notices that the screen is blank with no routes shown in the OFC.
What is a possible reason for this?

• A. There is an invalid MTU configuration at Chicago.
• B. Cloud VPN for the Edges / Profiles is not enabled.
• C. OSPF or BGP is not enabled.
• D. The routing table on the Edges has not been initialized.

Answer: B

 

NEW QUESTION 24
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected lo. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.

Users are complaining that web pages to certain web sites are very slow to load and at times unresponsive. The network administrator has verified that the traffic is going correctly out the underlay.
What should the administrator check next?

• A. Verify if Path-MTU Discovery is disabled.
• B. Verify if routes to Gateways are present in the Overlay Flow Control (OFC).
• C. Verify if there is latency, loss, or jitter on the underlay.
• D. Verify the Business Policy flows are matching.

Answer: A

 

NEW QUESTION 25
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

Several reports have come in from branch locations indicating customers cannot reach applications being served by the hub location. The hub location has a single LAN-side port from which it should be learning dynamic routes for the subnets serving the applications.
How should the technician verify if the ports on the Edge are up and working?

• A. Look in Test&Troubleshoot under the Remote Actions and run System Health.
• B. Look in Test&Troubleshoot under the Remote Diagnostics and run System Health.
• C. Look under Administration and System Settings to verify if the interfaces are configured and enabled.
• D. Look in Test&Troubleshoot under the Remote Diagnostics and run Interface status.

Answer: C

 

NEW QUESTION 26
......

How much VMware 5V0-41.20: VMware vSAN 6.7 Specialist Exam Cost

The price of the VmWare vSAN 6.7 Specialist exam is $250 USD. For more information related to exam price, please visit VmWare website as prices of VmWare exams fees vary country wise.

How to Prepare For VMware 5V0-41.20: VMware SD-WAN Troubleshoot Exam

Preparation Guide for VMware 5V0-41.20: VMware SD-WAN Troubleshoot Exam

Introduction

The VMware vSAN 6.7 Specialist exam is for professionals with 6-12 months of hands-on experience configuring, handling, and developing vSphere and vSAN. There are no clear prerequisites for the VMware 5V0-41.20 Course, although you should be acquainted with the principles and technology relevant to virtual machine implementation and administration. You are in control of critical Application developments that cover various platforms and ecosystems as an HTML5 VMware 5V0-41.20 administrator. You work together as a team and excel in a fast-paced world. You manage the application life cycle, build the user interface with HTML5, format it with CSS, and code it with JavaScript.

This exam assesses the knowledge of Core Application Development Concepts, Creating Application Development Objects, and Managing an Application Development Environment. Certification verifies your abilities and experience in the fields in which you prefer to serve. These certifications are available from a variety of suppliers on the market. If an applicant wishes to operate on 5V0-41.20: VMware vSAN 6.7 Specialist and demonstrate his skills, VmWare offers a certification. This VMware vSAN 6.7 Specialist Individuals Qualification 5V0-41.20 A candidate’s skills in 5V0-41.20 exam test Technology can be validated by certification.

In this guide, we will cover the 5V0-41.20 dumps, and all aspects of the 5V0-41.20 practice exams.

 

Online Exam Practice Tests with detailed explanations!: https://www.testsimulate.com/5V0-41.20-study-materials.html