D-NWR-DY-23 Revolutionary Guide To Exam EMC Dumps

D-NWR-DY-23 Free Study Guide! with New Update 715 Exam Questions

NEW QUESTION # 144
Which EMC NetWorker command line tool is used to modify both the Media database and client file indexes?

• A. nsrim
• B. mminfo
• C. nsrmm
• D. nsrck

Answer: C

NEW QUESTION # 145
On an EMC NetWorker Client, which command can be used to backup local data?

• A. nsrndmp_save
• B. save
• C. savepsm
• D. nsrsnap_vss_save

Answer: B

NEW QUESTION # 146
A Dell EMC NetWorker client has network access to a DD Boost storage device. The client's 3 TB data disk is 98% full with a 0.05% daily change rate. During the backup window, the client's CPU is 80% busy and the client's network interface is 7% busy.
Should Client Direct be recommended for this client?

• A. Yes, the data change rate is low
• B. No, the CPU is heavily utilized
• C. Yes, the network interface is less busy
• D. No, the data disk is too full

Answer: B

NEW QUESTION # 147
You have an EMC NetWorker backup group containing 10 clients. Each client will be backed up at either Level Full, Incremental, or Cumulative Incremental every day. The backup level for each is controlled by the schedule applied at the client level. All clients belong to the same protection group.
What is the most efficient method to force an immediate Full backup of all clients?

• A. Set the schedule on each client resource to perform only Full backups Start the backup action
• B. Set the Override for the current day to Full on the backup action
  Ensure client overrides are not allowed
  Start the workflow
• C. Assign the group to a new workflow with the action schedule of Full for the current day Use the default setting for the client override behavior Start the workflow
• D. Perform a client-initiated Full backup of each client individually

Answer: B

NEW QUESTION # 148
Which applications are supported by the Dell EMC NetWorker Module for Microsoft (NMM) federated backup?

• A. Exchange and SQL VSS
• B. Exchange and SQL VDI
• C. SharePoint and MySQL
• D. SQL VDI and SQL VSS

Answer: A

NEW QUESTION # 149
Refer to the exhibit.

An administrator asks about the clone flag on the Cloud.
What does the T flag represent?

• A. Save set will be terminated at the cloud provider
• B. Save set exists only on the cloud storage
• C. Save set exists only on a Cloud Tier device
• D. Save set will be cloned to a tape device

Answer: C

NEW QUESTION # 150
What is a characteristic of an EMC NetWorker synthetic full backup?

• A. NetWorker Snapshot Management supports synthetic full backups
• B. All NetWorker save sets participating in the synthetic full backup must be in the same pool
• C. All NetWorker save sets participating in the synthetic full backup must be browsable
• D. Supported backup types include file system, databases, and NDMP

Answer: C

NEW QUESTION # 151
Which process is responsible for authenticating and processing the NetWorker Server remote execution requests?

• A. nsrexecd
• B. nsrdispd
• C. nsrd
• D. nsrmmd

Answer: A

NEW QUESTION # 152
An administrator wants to use block-based backups on a Windows client. They have already installed the NetWorker client software package on the system Which statement describes the need for an additional NetWorker package to enable Block-based Backup support?

• A. NetWorker Extended Client software is required.
• B. NetWorker Block-based Backup software is required.
• C. No additional software is required.
• D. Logical Volume Manager is required.

Answer: B

NEW QUESTION # 153
A backup administrator has configured a new library using the EMC NetWorker Management Console on an existing storage node. They notice that the library does not show ready in the NMC.
Before running backups to the new library, the administrator wants to ensure the process that controls the library is running.
Which process should the administrator look for on the storage node?

• A. nsrlcpd
• B. nsrsnmd
• C. nsrmmd
• D. nsrexecd

Answer: A

NEW QUESTION # 154
What is used to configure and start the CLP/ELMS license server service on a Linux host?

• A. LMTools
• B. Imgrd
• C. nsrlic
• D. nsraddadmin

Answer: A

NEW QUESTION # 155
Which type of device is referred to as a BOOST device?

• A. Data Domain
• B. File Type
• C. Cloud
• D. Advance File Type

Answer: A

NEW QUESTION # 156
A Dell EMC backup administrator is setting up a schedule for backups to use the virtual synthetic full backup feature.
What is the recommended minimum number of full backups to run each year?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: D

NEW QUESTION # 157
What combination of simultaneous backups and recoveries is supported when using an advanced file type device in EMC Net Worker?

• A. Multiple backups and only one recovery
• B. Only one backup and one recovery
• C. Multiple backups and multiple recoveries
• D. Only one backup and multiple recoveries

Answer: C

NEW QUESTION # 158
Which EMC NetWorker command lists save sets stored on each volume?

• A. nsrinfo
• B. nsrmm
• C. mminfo
• D. nsrretrieve

Answer: C

NEW QUESTION # 159
For the Hyper-V File Level Recovery feature, what does the message queue adapter communicate with?

• A. Authentication Server and Authentication Server components
• B. NMC Server and NMC Server components
• C. NetWorker Server and NetWorker Server components
• D. License Server and License Server components

Answer: C

NEW QUESTION # 160
A backup administrator is configuring Dell EMC NetWorker to use Data Domain Cloud Tier devices.
During the configuration, a message appears that the Data Domain data movement policy will be updated to an app-based policy.
What is a function of the app-based policy?

• A. Direct the NetWorker clone action to copy data to the Data Domain Cloud Tier device
• B. Direct the NetWorker backup action to copy data to the Data Domain device
• C. Direct the Data Domain system to copy data to the cloud provider
• D. Direct the NetWorker backup action to copy data directly to the cloud provider

Answer: A

NEW QUESTION # 161
A client save set is backed up to an EMC NetWorker backup pool and later cloned to a volume in a clone pool.
On the volume, what property determines when the volume in the clone pool is a candidate for recycling?

• A. Longest clone retention time of any incremental save set
• B. Longest clone retention time of any differential save set
• C. Longest clone retention time of any save set
• D. Longest clone retention time of any full save set

Answer: C

NEW QUESTION # 162
An EMC NetWorker server has been configured to stage from an adv_file type device upon reaching a high water mark of 80%.
After the staging begins, which rule determines when the staging process ends?

• A. All save sets older than the max storage period are moved
• B. Capacity must fall below the low water mark
• C. Staging destination volume reaches full capacity
• D. Capacity must fall below the high water mark

Answer: B

NEW QUESTION # 163
An EMC NetWorker storage node has two advanced file type devices that stage the data to two physical LTO-4 drives. Due to a hardware issue, the administrator has disabled one of the LTO-4 drives.
How many nsrmmd processes are now running on the EMC NetWorker storage node?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: A

NEW QUESTION # 164
......

Get up-to-date Real Exam Questions for D-NWR-DY-23: https://www.testsimulate.com/D-NWR-DY-23-study-materials.html