71300X Dumps - Grab Out For [NEW-2021] Avaya Exam
71300X Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions
Avaya 71300X Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
NEW QUESTION 33
After the initial provisioning script has been run you see your Avaya Session Border Controller for Enterprise (SBCE) displaying a Registered state in the Web GUI. You click on the install link in the EMS System Management > Devices menu to continue the installation.
After displaying a status of Provisioning for a short while, which status does the SBCE display?
- A. Up
- B. Commissioned
- C. Busyout
- D. Maintenance-Busy
Answer: B
Explanation:
Explanation
SBC states:
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
201
NEW QUESTION 34
In which two locations is the Switch Password configured?
- A. In 'ip-services' form on Avaya Aura Communication Manager (CM) and in 'TSAPI link' on Avaya Aura Application Enablement Services (AES)
- B. In 'cti-link' form on Avaya Aura Communication Manager (CM) and in 'Switch Connection' on Avaya Aura Application Enablement Services (AES)
- C. In 'ip-services' form on Avaya Aura Communication Manager (CM) and in 'Switch Connection' on Avaya Aura Application Enablement Services (AES)
- D. In 'cti-link' form on Avaya Aura Communication Manager (CM) and in 'TSAPI link' on Avaya Aura Application Enablement Services (AES)
Answer: C
Explanation:
Explanation
Enabling AE Services refers to administering the transport link between Communication Manager and AE Services.
Procedure
1. Type change ip-services. Communication Manager displays the IP SERVICES form
2. Complete Page 1 of the IP SERVICES form
3. Complete Page 3 of the IP SERVICES form as follows.
a. In the AE Services Server field, type the name of the AE Services server b. In the Password field, create a password.
This is the password that the AE Services administrator must set on the AE Server (Communication Manager Interface > Switch Connections > Edit Connection > Switch Password). The passwords must exactly match on both Communication Manager and the AE Services server.
References: Avaya Aura Application Enablement Services Administration and Maintenance Guide, Release
6.3 (June 2014) , page 26
https://downloads.avaya.com/css/P8/documents/100171737
NEW QUESTION 35
In the context of Avaya Aura Presence Services 7.x, what is a Fetcher?
- A. It is a user whose devices are sending status or presentity information on his behalf using a Publish message regarding his communication status.
- B. It is a kind of watcher that requests a one-time view of the user's current presentity information, but does not get future presentity information for a user.
- C. It is a watcher that is subscribing to current and future presentity information from another user.
- D. It is the presence information about a user that the system reports.
Answer: B
Explanation:
Explanation
Fetchers pull the value of presence information for a specific presentity from the presence service. If a fetcher is fetching information on a regular basis, it is called a poller. Subscribers, on the other hand, subscribe to presentity information on the presence service.
NEW QUESTION 36
Which Avaya BreezeTM Cluster type is the Avaya Aura Presence Services snap-in installed on?
- A. General Purpose
- B. IM_Presence
- C. Presence Services
- D. Core Platform
Answer: D
Explanation:
Explanation
Verifying that Presence Services snap-in is ready to support Presence and IM Procedure
1. On the System Manager web console, navigate to Elements > Avaya Breeze> Cluster Administration.
2. Locate the row for the cluster, and verify that:
* The Cluster Profile field shows Core Platform.
etc.
References: Avaya Aura Presence Services Snap-in Reference. Release 7.0.1 (December 2016), page 224
https://downloads.avaya.com/css/P8/documents/101013646
NEW QUESTION 37
Which configuration must be completed before configuring a TSAPI link on Avaya Aura Application Enablement Services (AES)?
- A. A CTI-user must be configured on Avaya Aura Application Enablement Services (AES) first.
- B. A Switch Connection must be configured on Avaya Aura Application Enablement Services (AES) first.
- C. A CTI link must be configured on Avaya Aura Communication Manager (CM) first.
- D. A signaling-group must be configured on Avaya Aura Communication Manager (CM) first.
Answer: C
Explanation:
Explanation
If you are administering the AE Server for TSAPI, JTAPI, DMCC with Call Control, Telephony Web Service, or an AE Services integration (Microsoft or IBM Sametime), you must administer a CTI link from Communication Manager to AE Services.
Follow these steps from a Communication Manager SAT to administer a CTI link type ADJ-IP.
Procedure
1. Type add cti-link <link number>, for example add cti-link 5.
2. Complete the CTI LINK form as follows:
a. In the Extension field, type <station extension>, for example 70001.
b. In the Type field, type ADJ-IP.
c. In the Name field, type <name of AE Server>, for example aeserver1.
References: Avaya Aura Application Enablement Services Administration and Maintenance, page 30 Guide
https://downloads.avaya.com/css/P8/documents/100171737
NEW QUESTION 38
On Avaya Session Border Controller for Enterprise (SBCE), which two ways can be used to view System Logs? (Choose two.)
- A. from EMS web GUI SBCE Dashboard access Logs > System Logs
- B. from CLI execute cat archive > syslog > ipcs.log
- C. from System Manager web GUI > Alarms and Events
- D. from CLI execute cat > var > log > Avaya > syslog
Answer: A,B
Explanation:
Explanation
C: Call Trace data are written to this location:
- /archive/syslog/ipcs/octeon.log
D: Viewing system logsProcedure
1. Log on to the EMS web interface with administrator credentials.
2. Select the Logs option from the toolbar, and click the System Logs menu.
The system displays the Syslog Viewer screen. On this screen, you can specify criteria in the Query Options section to filter the results displayed.
3. In the Start Date and End Date fields, filter the results displayed in a search report to fall within starting and ending dates and times. In previous Avaya SBCE Syslog Viewer windows, there were four separate fields:
Start Date, Start Time, End Date, and End Time.
References: Troubleshooting and Maintaining Avaya Session Border Controller for Enterprise (December
2015), page 21
Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page 478
NEW QUESTION 39
When looking at Avaya Aura System Manager - Home > Services > Replication, what is the name of the replica group representing the EDP / Avaya BreezeTM instances?
- A. CollaborationEnvironment_3.1
- B. CollaborationEnvironment_7.0
- C. Avaya BreezeTM_7.0
- D. Engagement Development Platform EDP_7.0
Answer: A
Explanation:
Explanation
Confirming that Avaya Breeze successfully replicates with System Manager Procedure
1. On the System Manager web console, navigate to Services > Replication.
2. In Replica Group column, click CollaborationEnvironment_3.1.
3. In Replica Node Host Name column, locate your newly-deployed Avaya Breeze.
4. After 2 - 15 minutes, verify that the status of the Synchronization Status field is green/ Synchronized. If not, see Repairing replication between Avaya BreezeTM and System Manager References: Avaya Aura Presence Services Snap-in Reference, Release 7.0.1, (December 2016), page 24
https://downloads.avaya.com/css/P8/documents/101013646
NEW QUESTION 40
After running the Install wizard on Avaya Session Border Controller for Enterprise (SBCE), you added a Public Outside IP address to the B1 interface. You try to ping this IP address from a PC in the same subnet but it falls.
What would you do first to resolve the issue?
- A. Set the Default Gateway router IP address, navigate to the Interfaces and Enable the B1 Interface.
- B. Reboot SBCE.
- C. Navigate to Device Specific Settings > Network Management > Interfaces and Enable the B1 interface.
- D. Restart Applications.
Answer: C
Explanation:
Explanation
The interface might need to be enabled.
2. Click on the Interface Configuration tab.
3. Click the Toggle link for both the A1 and the B1 interfaces.
The Administrative Status for both A1 and B1 changes to Enabled
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
204
NEW QUESTION 41
Which access control method is used by the Avaya Aura Application Enablement Services (AES) server for administrators?
- A. Role-Based Access Control
- B. System Manager AES Management Menu
- C. Single Administrator simple password login
- D. Challenge-Response shared-key method only
Answer: A
Explanation:
Explanation
Role Based Access Control (RBAC)
Access to AE Services Management Console Web pages can be restricted by user authorization level. The operations that users are allowed to perform such as read, edit and delete can also be restricted.
References: Avaya Aura Application Enablement Services Overview and Specification, Release 7.0.1, Issue 2 (June 2016), page 20
https://downloads.avaya.com/css/P8/documents/101014052
NEW QUESTION 42
For an Avaya SIP telephone, working as a Remote Worker via the Avaya Session Border Controller for Enterprise (SBCE), which IP address should be configured in the Server List of the one-X Communicator?
- A. the Avaya Aura Session Manager External Interface allocated for Mobile Workspace Endpoints.
- B. the SBCE Internal Interface allocated for Mobile Workspace Endpoint
- C. the SBCE External Interface allocated for Mobile Workspace Endpoint
- D. the Internal Avaya Aura Session Manager SM100 IP Address
Answer: A
Explanation:
Explanation
Remote Worker Avaya one-X Communicator Configuration
The following screens illustrate Avaya one-X Communicator administration settings for the Remote Worker used in the reference configuration.
Example:
1. On the Avaya one-X Communicator application running on the PC, click on the Settings icon on the top right to display the Settings window.2. Click on Telephony, the General Settings window will appear. The following values were used in the reference configuration:
Under Using: select SIP (SIP must be selected; H.323 is not supported for Remote Workers).
* Under Server List, click Add (the Add Server window to the right will appear).
* Under Proxy Server enter 192.168.157.180 (This is one of the two "public" IP addresses for interface B1 on the Avaya SBCE used for Remote Worker access to Session Manager (public IP not used for relay services).
Etc.
References: Configuring Remote Workers with Avaya Session Border Controller for Enterprise Rel. 6.2, Avaya Aura Communication Manager Rel. 6.3 and Avaya Aura Session Managers Rel. 6.3 - Issue 1.0, page 81
https://downloads.avaya.com/css/P8/documents/100183254
NEW QUESTION 43
You need to connect Avaya BreezeTM platform that is hosting Avaya Aura Presence Services Snap-in with Avaya Aura Session Manager (SM).
Which three are needed? (Choose three.)
- A. ports UDP 5060 and TLS 5061
- B. one Entity Link from SM to Avaya Aura Presence Services Snap-in
- C. ports TCP 5060 and UDP 5060
- D. one Entity Link from SM to Avaya BreezeTM
- E. TLS 5061 and TLS 5062
Answer: B,D,E
Explanation:
Explanation
BD: Administering Entity Link between Presence Services Cluster SIP Entity and Session Manager Procedure
1. On the System Manager web console, navigate to Elements > Routing > Entity Links.
2. In the Name field, enter a name for Entity Link.
3. In the SIP Entity 1 field, select the Session Manager instance.
4. In the Protocol field, select TLS.
5. In the Port field, type 5062.
Note: Note that this port number cannot be the same as the port number administered in
"Administering Entity Link between Avaya Breeze and Session Manager".
CD: Administering Entity Link between Avaya Breeze and Session Manager.
About this task
Create an En2tity Link to connect Session Manager to Avaya Breeze. You must administer separate Entity Links for Avaya Breeze servers in order to open SIP listeners on the designated ports.
Session Manager requires a Listen Port with the Listen Port as 5061, Protocol as TLS, and Default Domain as the login domain of endpoint devices. Without this, PPM will fail for SIP endpoints.
References: Avaya Aura Presence Services Snap-in Reference. Release 7.0.1 (December 2016), pages 25-26
https://downloads.avaya.com/css/P8/documents/101013646
NEW QUESTION 44
By default, which Codec does Avaya Aura Messaging (AAM) support?
- A. G.711
- B. G.726
- C. G.722
- D. G.729
Answer: A
Explanation:
Explanation
You must configure the Messaging system to use the G.711 encoding format.
Note: The G.711 format provides the highest audio quality especially when voice networks use multiple encodings and decodings. Avaya requires that you use the G.711 encoding format in Messaging systems that support TTY devices.
The G.711 encoding format uses a higher encoding rate than GSM. The G.711 encoding format therefore produces larger files and requires more storage space for messages. Messaging provides customers with adequate storage space for message playback and networking.
References: Administering Avaya Aura Messaging, Release 6.2 Issue 2.2 (December 2013) , page 201
https://downloads.avaya.com/css/P8/documents/100172127
NEW QUESTION 45
Which statement describes Cross-Origin Resource Sharing (CORS)?
- A. It is making DSP resources available regardless of the originating location of a call.
- B. It allows for signaling-groups to be used by more than one trunk-group.
- C. It is a network setup by which an Avaya Aura Media Server (AAMS) can be used by more than one Avaya Aura Communications Manager (CM).
- D. It is a W3C specification that allows cross-domain communication from the browser.
Answer: D
Explanation:
Explanation
Cross-origin resource sharing (CORS) is a mechanism that allows restricted resources (e.g. fonts) on a web page to be requested from another domain outside the domain from which the first resource was served. A web page may freely embed cross-origin images, stylesheets, scripts, iframes, and videos.
Note on the History of CORS:
Cross-origin support was originally proposed by Matt Oshry, Brad Porter, and Michael Bodell of Tellme Networks in March 2004 for inclusion in VoiceXML 2.1 to allow safe cross-origin data requests by VoiceXML browsers.
In May 2006 the first W3C Working Draft was submitted. In March 2009 the draft was renamed to
"Cross-Origin Resource Sharing" and in January 2014 it was accepted as a W3C Recommendation.
References: https://en.wikipedia.org/wiki/Cross-origin_resource_sharing
NEW QUESTION 46
Which statement about WebRTC and Media Resources is true?
- A. WebRTC uses its own embedded proprietary technology to handle and process Media Packets.
- B. WebRTC relies on the Avaya Aura Media Server (AAMS) to convert the WebRTC media stream to a SIP media stream.
- C. WebRTC uses Media Resources from a Hard-Based Media Gateway controlled by Avaya Aura Communication Manager (CM).
- D. WebRTC does not use any Media Resources since it only handles Text-Chat sessions.
Answer: B
Explanation:
Explanation
The Avaya Media Server can translate WebRTC media into a SIP media stream.
References:
http://www.avaya.com/blogs/archives/2014/10/an-introduction-to-the-avaya-webrtc-snap-in.html
NEW QUESTION 47
To allow trust between Avaya Aura System Manager (SMGR) and Avaya Aura Messaging (AAM), there is a password set when you add the Trusted Server on AAM. This password must match with the password also configured in SMGR.
Which statement about the password in SMGR is true?
- A. It needs to match the root password used to login to SMGR command line.
- B. It needs to match the Enrollment Password.
- C. It needs to match the Attributes of the Messaging Managed Element in the Inventory.
- D. It needs to match the admin password used to login to SMGR using a web browser.
Answer: C
Explanation:
Explanation
Configuring Messaging in the normal operational mode
Before you begin
* Add both the primary and secondary servers as Trusted Servers in the Messaging system.
* Update the Login, Password, and Confirm Password fields with the appropriate trusted server defined on the Messaging system.
Procedure
1. Log on to the Messaging system that System Manager manages.2. Add the secondary System Manager server as Trusted Servers in the Messaging system.
3. Log on to the secondary System Manager server.
4. On the System Manager web console, click Services > Inventory.
5. In the left navigation pane, click Manage Elements.
6. On the Manage Elements page, select the Messaging system that you want to change to the secondary System Manager server.
7. Click Edit.
8. On the Attributes tab, fill the Login, Password, and Confirm Password fields with the corresponding name and password of the Messaging trusted server.
9. Click Commit.
10. Click Inventory > Synchronization > Messaging System, and select the required Messaging element.
11. Click Now.
The secondary System Manager server retrieves all data from Messaging and is now ready to administer and manage Messaging.
References: Administering Avaya Aura System Manager for Release 6.3.11 and later, Release 6.3, Issue 8 (November 2016), page 104
https://downloads.avaya.com/css/P8/documents/101008185
NEW QUESTION 48
To which other component does the Avaya Aura Application Enablement Services (AES) Switch Connections connect?
- A. Avaya Aura Session Manager (SM) using SIP
- B. Avaya Aura Communications Manager (CM) using SIP
- C. Avaya Aura Media Server (AAMS) using H.323
- D. Avaya Aura Communications Manager (CM) using H.323
Answer: D
Explanation:
Explanation
Adding a switch connection
The procedure include the following steps:
1.From the AE Services Management Console main menu, select Communication Manager Interface > Switch Connections.
2. On the Switch Connections page, in the Add Connection field, type a switch connection name (for example Switch1) For the Secure H323 Connection check box, do one of the following:
* For Communication Manager6.3.6 or later and TLS for the H.323 Signaling Channel (normally associated with FIPS Mode), select the Secure H323 Connection check box.
* For any previous release of Communication Manager without TLS for the H.323 Signaling Channel, uncheck the Secure H323 Connection check box.
Etc.
References: Avaya Aura Application Enablement Services Administration and Maintenance Guide, page 73
https://downloads.avaya.com/css/P8/documents/100171737
NEW QUESTION 49
Which three statements about Avaya BreezeTM are true? (Choose three.)
- A. It is used by Avaya, Partner, and Enterprise Developers.
- B. It is a development platform that enables rapid development for applications that are targeted to meet a customer's communications needs.
- C. It allows application developers to quickly add new capabilities to their Avaya solutions.
- D. It was formerly called Collaboration POD but has been renamed to Avaya BreezeTM.
- E. It does not require a license.
Answer: A,B,C
Explanation:
Explanation
Avaya Breeze provides a virtualized and secure application platform where Java programmers can develop and dynamically deploy advanced collaboration capabilities that extend the power of Avaya Aura.
Customers, partners, and Avaya organizations can rapidly develop snap-ins and applications that are deployed on Avaya Breeze.
NEW QUESTION 50
When Avaya Aura Presence Services is implemented, which statement is true about Port Management?
- A. Port 5222 is used for one-X Endpoints, while Port 5269 is open for connecting with other XMPP
3rd-Party Servers. - B. It collects statistics about Port-Usage from each Presence-compatible endpoint across the network.
- C. It allows independent management capabilities to filter out undesired message to every Avaya Aura Presence Services user.
- D. It allows multi-media services over a standard Web-Browser.
Answer: A
Explanation:
Explanation
Port 5222: XMPP connection configuration
The Connection Manager runs by default when you install the XCP server. It is configured with a JSM Command Processor and two XMPP directors. The XMPP directors handle communication with IM clients.
One of the directors is configured to use port 5222 and the other is configured to use port 5223 for secure communications.
Port 5269:Example Obtaining the Server-to-Server Port from an Openfire server Procedure
1. Log in to the Openfire Web console.
2. Click Server > Server Settings > Server to Server.
3. In the Service Enabled section, the Enabled check box should be checked, and the port value is contained in the box to the right of Remote servers can exchange packets with this server on port.
By default the value is 5269, and it is recommended that this default value be maintained.
References: Administering Avaya Aura Presence Services, Release 6.2.4, (June 2014), pages 110, 154
https://downloads.avaya.com/css/P8/documents/100180467
NEW QUESTION 51
In the Avaya Session Border Controller for Enterprise (SBCE), before a traffic carrying Network Interface (A1 or B1) can be pinged, to which state do you have to toggle the status on Device Specific Settings > Network Management / Interfaces?
- A. Accept Service
- B. In-Service
- C. Enabled
- D. Active
Answer: C
Explanation:
Explanation
Commission the SBC-SBC Configuration
3. Click the Toggle link for both the A1 and the B1 interfaces.
The Administrative Status for both A1 and B1 changes to Enabled:
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
203
NEW QUESTION 52
A field engineer runs the Installation Wizard to install the Avaya Session Border Controller for Enterprise (SBCE).
Which statement about the Domain Name Service (DNS) configuration is true?
- A. A DNS address should not be configured here.
- B. A DNS address does not need to be configured.
- C. A DNS address needs to be configured, even if it is unused and/or unreachable.
- D. A DNS address always needs to be configured for both the Primary and Secondary DNS, even if only the DNS is available.
Answer: C
Explanation:
Explanation
The system requires the DNS server to resolve the host names for alarming and remote access name associated with the Avaya Service Center.You must supply a DNS address entry, even if it is unused and/or unreachable.
NEW QUESTION 53
You are creating a SIP Entity for Avaya Aura Engagement Development Platform - EDP / Avaya BreezeTM.
What do you have to enter in the field labeled FQDN or IP Address?
- A. the IP-Address or FQDN of Core Platform Cluster
- B. the IP-Address or FQDN of general Purpose Cluster
- C. the Management IP-Address or FQDN of the Avaya BreezeTM platform.
- D. the SM100 IP-address or FQDN of the Avaya BreezeTM platform
Answer: C
Explanation:
Explanation
Administering an Avaya Breeze instance
Before you begin
To complete this task you will need:
* The IP address of the Avaya Breeze Management Network Interface.
This is the same IP address you used when deploying the Virtual Machine (VM).
* The IP address including the network mask, and default gateway for the Avaya Breeze Security Module.
Procedure (see step 6 below)
1. On System Manager, in Elements, click Avaya Breeze.
2. Click Server Administration.
3. In the Avaya Breeze Server Instances list, click New.
4. In the SIP Entity field, select the SIP Entity that you created.
5. Ensure that the value in the UCID Network Node ID field is unique across the solution deployment so that it does not conflict with other UCID-generating entities like Avaya Aura Communication Manager or Avaya Aura Experience Portal.
6. In the Management Network Interface FQDN or IP Address field, type the IP address of the Avaya Breeze Management Network Interface.
References: Deploying Avaya Breeze, Release 3.1, (September 2016), page 47
https://downloads.avaya.com/css/P8/documents/101014426
NEW QUESTION 54
How many Server Flows and/or Subscriber Flows are required for SIP Trunking?
- A. one Subscriber Flow and one Server Flow
- B. a minimum of two Subscriber Flows
- C. one Subscriber Flow and two Server Flows
- D. a minimum of two Server Flows
Answer: C
Explanation:
Explanation
Two types of flows need to be defined for the proper routing of SIP messages from and to the endpoints and the SIP server.
Example, Server Flows:
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
540, 546
NEW QUESTION 55
......
Get New 71300X Certification Practice Test Questions Exam Dumps: https://www.testsimulate.com/71300X-study-materials.html