300-715 Self-Study Guide for Becoming an Implementing and Configuring Cisco Identity Services Engine Expert

300-715 Study Guide Realistic Verified 300-715 Dumps

For more info about Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)

Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)

The Cisco 300-715 exam covers a range of topics, including ISE architecture, installation and configuration, network access devices, identity management, endpoint compliance, and network access security. 300-715 exam is designed to test the candidate's knowledge and abilities in these areas, and it is recommended that candidates have practical experience working with ISE solutions before attempting the exam.

 

NEW QUESTION # 25
When setting up profiling in an environment using Cisco ISE for network access control, an organization must use non-proprietary protocols for collecting the information at layer 2. Which two probes will provide this information without forwarding SPAN packets to Cisco ISE? {Choose two.)

• A. NetFlow probe
• B. DHCP SPAN probe
• C. RADIUS probe
• D. DNS probe
• E. SNMP query probe

Answer: B,D

NEW QUESTION # 26
Which profiling probe collects the user-agent string?

• A. DHCP
• B. AD
• C. HTTP
• D. NMAP

Answer: C

Explanation:
Section: Profiler

NEW QUESTION # 27
Refer to the exhibit. Which checkbox must be enabled to allow Cisco ISE to publish group membership information for active users that can be shared with Cisco Firepower devices?

• A. Enable Device Admin Service
• B. pxGrid
• C. Enable Passive Identity Service
• D. Enable SXP Service

Answer: B

NEW QUESTION # 28
An engineer builds a five-node distributed Cisco ISE deployment The first two deployed nodes are responsible for the primary and secondary administration and monitoring personas Which persona configuration is necessary to have the remaining three Cisco ISE nodes serve as dedicated nodes in the Cisco ISE cube that is responsible only for handling the RADIUS and TACACS+ authentication requests, identity lookups, and policy evaluation?

• A.
• B.
• C.
• D.

Answer: C

NEW QUESTION # 29
Which two endpoint compliance statuses are possible? (Choose two.)

• A. compliant
• B. valid
• C. unknown
• D. known
• E. invalid

Answer: A,C

Explanation:
Section: Endpoint Compliance

NEW QUESTION # 30
An organization is migrating its current guest network to Cisco ISE and has 1000 guest users in the current database There are no resources to enter this information into the Cisco ISE database manually. What must be done to accomplish this task effciently?

• A. Use a JSON fie to automate the migration of guest accounts
• B. Use an XML file to change the existing format to match that of Cisco ISE
• C. Use SOL to link me existing database to Ctsco ISE
• D. Use a CSV file to import the guest accounts

Answer: A

NEW QUESTION # 31
What occurs when a Cisco ISE distributed deployment has two nodes and the secondary node is deregistered?

• A. Both nodes restart.
• B. The primary node becomes standalone
• C. The secondary node restarts.
• D. The primary node restarts

Answer: A

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/1-1-1/installation_guide/ise_install_guide/ise_deploy.html if your deployment has two nodes and you deregister the secondary node, both nodes in this primary-secondary pair are restarted. (The former primary and secondary nodes become standalone.)

NEW QUESTION # 32
Drag and drop the description from the left onto the protocol on the right that is used to carry out system authentication, authentication, and accounting.

Answer:

Explanation:

NEW QUESTION # 33
An engineer is using the low-impact mode for a phased deployment of Cisco ISE and is trying to connect to the network prior to authentication. Which access will be denied in this?

• A. DHCP
• B. HTTP
• C. DNS
• D. EAP

Answer: B

Explanation:
HTTP is the most reasonable answer. User that tried to connect needs to connect to DNS, DHCP and of course EAP.

NEW QUESTION # 34
Refer to the exhibit:

Which command is typed within the CU of a switch to view the troubleshooting output?

• A. show authentication sessions mac 000e.84af.59af details
• B. show authentication interface gigabitethemet2/0/36
• C. show authentication sessions method
• D. show authentication registrations

Answer: A

NEW QUESTION # 35
A network engineer must remove a device that has been allowlisted. How should the engineer remove it manually on Cisco ISE?

• A. Administration > Identity Management > Groups > Endpoint Identity Groups > Profiled
• B. Administration > Identity Management > Endpoint Identity Groups > Profiled
• C. Administration > Identity Management > Groups > Endpoint Identity Groups
• D. Administration > Identity Management > Endpoint Identity Groups

Answer: C

Explanation:
To remove a device that has been allowlisted manually on Cisco ISE, the correct answer is option
- Administration > Identity Management > Groups > Endpoint Identity Groups. This option allows you to view and edit the endpoint identity groups that are configured on Cisco ISE, and to delete any device that belongs to a specific group.

NEW QUESTION # 36
Which three default endpoint identity groups does cisco ISE create? (Choose three)

• A. end point
• B. whitelist
• C. blacklist
• D. profiled
• E. Unknown

Answer: C,D,E

Explanation:
Reference:
Default Endpoint Identity Groups Created for Endpoints
Cisco ISE creates the following five endpoint identity groups by default: Blacklist, GuestEndpoints, Profiled, RegisteredDevices, and Unknown. In addition, it creates two more identity groups, such as Cisco-IP-Phone and Workstation, which are associated to the Profiled (parent) identity group. A parent group is the default identity group that exists in the system.
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide_24_new_chapter_010101.html#ID1678

NEW QUESTION # 37
An administrator is creating a new TACACS sell. The users that get assigned this profile should have initial access privileges equivalent to user EXEC mode, and a max privilege level of privileged EXEC mode. How is this configured?
A)

B)

C)

D)

• A. Option D
• B. Option A
• C. Option C
• D. Option B

Answer: D

NEW QUESTION # 38
A customer requires a Cisco ISE deployment where quests must log in to a webpage with unique credentials in the form username. User1 and Password: A463646808. Which deployment should the customer use?

• A. single credentials login to guest portal
• B. mobile number field using the guest page
• C. hotspot portal authentication
• D. captcha protection self-registration

Answer: A

NEW QUESTION # 39
When creating a policy within Cisco ISE for network access control, the administrator wants to allow different access restrictions based upon the wireless SSID to which the device is connecting. Which policy condition must be used in order to accomplish this?

• A. Radius Called-Station-ID CONTAINS <SSID Name>
• B. DEVICE Device Type CONTAINS <SSID Name>
• C. Network Access NetworkDeviceName CONTAINS <SSID Name>
• D. Airespace Airespace-Wlan-ld CONTAINS <SSID Name>

Answer: A

NEW QUESTION # 40
An administrator is attempting to join a new node to the primary Cisco ISE node, but receives the error message "Node is Unreachable". What is causing this error?

• A. No administrative certificate is available for the second node.
• B. The second node is in standalone mode.
• C. No admin privileges are available on the second node.
• D. The second node is a PAN node.

Answer: A

NEW QUESTION # 41
A client connects to a network and the authenticator device learns the MAC address
04:49:23:86:34:AB of this client. After the MAC address is learned, the 802.1 x authentication process begins on this port. Which ISE deployment mode restricts all traffic initially, applies a rule for access control if 802.1x authentication is successful, and can be configured to grant only limited access if 802.1 x authentication is unsuccessful?

• A. low-impact mode
• B. closed mode
• C. monitor mode
• D. open mode

Answer: B

NEW QUESTION # 42
Which of these is not a method to obtain Cisco ISE profiling data?

• A. SNMP query
• B. HTTP
• C. RADIUS
• D. DNS
• E. active scans
• F. Netflow

Answer: E

NEW QUESTION # 43
An administrator is configuring cisco ISE lo authenticate users logging into network devices using TACACS+ The administrator is not seeing any oí the authentication in the TACACS+ live logs. Which action ensures the users are able to log into the network devices?

• A. Enable the session services in the administration persona
• B. Enable the service sessions in the PSN persona.
• C. Enable the device administration service in the Administration persona
• D. Enable the device administration service in the PSN persona.

Answer: D

Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ISE_admin_guide_24/m_ise_tacacs_device_admin.html

NEW QUESTION # 44
Which two responses from the RADIUS server to NAS are valid during the authentication process? (Choose two )

• A. access-reserved
• B. access-accept
• C. access-response
• D. access-challenge
• E. access-request

Answer: B,D

Explanation:
https://www.cisco.com/c/en/us/support/docs/security-vpn/remote-authentication-dial-user-service- radius/12433-32.html

NEW QUESTION # 45
What does a fully distributed Cisco ISE deployment include?

• A. PAN and MnT on the same node while PSNs are on their own dedicated nodes.
• B. PAN and PSN on the same node while MnTs are on their own dedicated nodes.
• C. All Cisco ISE personas on their own dedicated nodes.
• D. All Cisco ISE personas are sharing the same node.

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ISE_admin_guide_24/m_setup_cisco_ise.html

NEW QUESTION # 46
An engineer builds a five-node distributed Cisco ISE deployment. The first two deployed nodes are responsible for the primary and secondary administration and monitoring personas.
Which persona configuration is necessary to have the remaining three Cisco ISE nodes serve as dedicated nodes in the Cisco ISE cube that is responsible only for handling the RADIUS and TACACS+ authentication requests, identity lookups, and policy evaluation?

• A.
• B.
• C.
• D.

Answer: C

NEW QUESTION # 47
A network engineer must enforce access control using special tags, without re-engineering the network design. Which feature should be configured to achieve this in a scalable manner?

• A. RBAC
• B. VLAN
• C. SGT
• D. dACL

Answer: C

NEW QUESTION # 48
An engineer is testing low-impact mode for a phased deployment of Cisco ISE. Which type of traffic is denied when a host tries to connect to the network prior to authentication?

• A. DHCP
• B. HTTP
• C. DNS
• D. EAP

Answer: B

NEW QUESTION # 49
......

Cisco Identity Services Engine is a comprehensive security solution that provides access control, threat defense, and user identity management. By passing the 300-715 exam, candidates will demonstrate their ability to design, deploy, configure, and manage Cisco ISE solutions to secure their network infrastructure.

 

Valid 300-715 Exam Dumps Ensure you a HIGH SCORE: https://www.testsimulate.com/300-715-study-materials.html