2024 OSP-002 Dumps PDF - OSP-002 Real Exam Questions Answers

Valid OSP-002 Test Answers & BICSI OSP-002 Exam PDF

NEW QUESTION # 80
The diameter of the core in OM2 and OM3 multimode fiber is how large?

• A. 62.5 microns
• B. 50 microns
• C. 62.5 mm
• D. 9 mm

Answer: B

NEW QUESTION # 81
Multimode graded-index glass fiber optic cables are tested with \_\_\_ sources at \_\_\_\_\_\_ and \_\_\_\_\_ wavelengths.

• A. Laser, 1310, 1550 nm
• B. LED, 650, 850 nm
• C. LED, 850, 1300 nm
• D. Laser, 980, 1400 nm

Answer: C

NEW QUESTION # 82
Premises cables must be rated for \_\_\_\_\_\_\_\_\_\_ to meet codes.

• A. Weight in cable trays
• B. Pull strength
• C. Fire retardance
• D. Bend radius

Answer: C

NEW QUESTION # 83
Both mechanical splices and prepolished/splice connectors require a good \_\_\_\_\_\_\_\_\_\_ to have low loss.

• A. Fiber loss
• B. Cleave on the fiber being terminated
• C. Cable design
• D. Field polishing technique

Answer: B

NEW QUESTION # 84
Wireless networks require cables to connect the server, router or hub to the \_\_\_\_\_\_.

• A. Uplink
• B. PC
• C. SNMP
• D. AP (Access point)

Answer: D

NEW QUESTION # 85
Wavelength division multiplexing uses __________ to transmit multiple signals on a single fiber.

• A. The high fiber bandwidth
• B. The ability of fiber to transmit multiple wavelengths without mixing
• C. F-P Lasers
• D. The wide spectral width of lasers

Answer: B

NEW QUESTION # 86
Gigabit Ethernet uses all four pairs of a UTP cable \_\_\_\_\_\_\_\_\_.

• A. For power
• B. Bidirectionally
• C. Simultaneously and bidirectionally
• D. With 2 pairs in each direction

Answer: C

NEW QUESTION # 87
An ICT distribution designer is coordinating with local agencies for an upcoming campus improvement project which could affect the design. Which two of the following listed items will MINIMIZE design changes once the project begins? (Choose two.)

• A. Approval of permit by AHJ - local Fire Marshal
• B. Identification of maintenance holes, hand holes locations
• C. Hand off of documentation to project manager
• D. Identification and agreement of conduit pathway routes
• E. Approval of budget by chief financial officer (CFO)

Answer: B,D

NEW QUESTION # 88
Multiple Response: Identify one or more choices that best complete the statement or answer the question.
Multimode transceivers use \_\_\_\_\_\_\_\_\_\_ sources depending on their requirements for coupled power and bandwidth.

• A. DFB lasers
• B. LED
• C. VCSEL
• D. F-P lasers

Answer: B,C

NEW QUESTION # 89
A category-rated UTP cable (Cat 3/5e/6/6A) used for horizontal cabling has \_\_\_\_\_\_ color coded pairs of wires.

• A. 0
• B. 1
• C. 2
• D. Any even number

Answer: C

NEW QUESTION # 90
A client hired an ICT distribution designer who is designing some additional capacity for a customer owned aerial outside plant. Which of the following would be a PRIMARY consideration?

• A. Clearances will still be adequate with the added equipment.
• B. Sufficient space exists to install additional guying if required.
• C. Utility coordination with public utilities verifies minimum inductive interference.
• D. That all of the poles on the path are at least Class 3.

Answer: A

NEW QUESTION # 91
The difference between a fiber optic connector and a splice is __________.

• A. Connectors require adhesives
• B. Splices need expensive tools
• C. Connectors are demountable, while splices are permanent
• D. Connectors are smaller than splices

Answer: C

NEW QUESTION # 92
Structured cabling standards call for a maximum length of multimode fiber optic cable for backbones of
\_\_\_\_\_\_\_\_\_\_.

• A. 2000 meters
• B. 1000 meters
• C. 800 meters
• D. 3000 meters

Answer: A

NEW QUESTION # 93
Ethernet was first developed as a \_\_\_\_ architecture using \_\_\_\_\_ cable with \_\_\_\_\_\_\_.

• A. Bus, UTP, RJ-45 connectors
• B. Bus, coax, taps
• C. Ring, coax, RJ-45 connectors
• D. Star, UTP, RJ-45 connectors

Answer: A

NEW QUESTION # 94
What is the core size of 1300 - 1550 nm singlemode fiber?

• A. 63.5 microns
• B. 5 mm
• C. 50 microns
• D. 9 microns

Answer: D

NEW QUESTION # 95
How many methods are included in standards for setting the "0 dB' reference for loss testing?

• A. Four
• B. One
• C. Three
• D. Two

Answer: C

NEW QUESTION # 96
Which two of the following components are included in a backbone distribution system (BDS)? (Choose two.)

• A. Equipment Cord
• B. Work area outlets
• C. Horizontal Cable
• D. Equipment rooms
• E. Telecommunications enclosures

Answer: D,E

NEW QUESTION # 97
OTDRs are used in outside plant cables to \_\_\_\_\_\_\_\_\_\_.

• A. All of the above
• B. Find faults
• C. Verify splice loss
• D. Measure length

Answer: A

NEW QUESTION # 98
Structured cabling standards call for a maximum length of UTP cable for data of \_\_\_\_\_\_\_\_\_\_.

• A. 90 meters
• B. 300 meters
• C. 800 meters
• D. 100 meters

Answer: D

NEW QUESTION # 99
To maintain rated performance, twists in each pair must be maintained to within \_\_\_\_\_\_\_ of the termination.

• A. 3 in or 75 mm
• B. 1/2 inch or 13 mm
• C. 2 in or 50 mm
• D. 1 inch or 25 mm

Answer: B

NEW QUESTION # 100
What is the derating factor for a 24 AWG (0.51 mm) stranded cords?

• A. 20%
• B. 60%
• C. 10%
• D. 30%
• E. 50%

Answer: A

NEW QUESTION # 101
How much untwist is allowed on Cat 5/5e/6 pairs at a punchdown block to maintain specified performance?

• A. 1/4 inch (6 mm)
• B. 1/2 inch (13 mm)
• C. 2 inches (50 mm)
• D. 1 inch (25 mm)

Answer: B

NEW QUESTION # 102
Potential sources of interference for wireless LANs include \_\_\_\_\_\_\_.

• A. All of the above
• B. Remote controls like door openers
• C. Other wireless networks
• D. Moving objects

Answer: A

NEW QUESTION # 103
Rays of light transmitted in multimode fiber are called \_\_\_\_\_\_\_\_\_\_.

• A. Modes
• B. Reflections
• C. Refractions
• D. Waves

Answer: A

NEW QUESTION # 104
......

BICSI OSP-002 exam is a comprehensive certification examination that evaluates the knowledge and skills required for designing and installing outside plant infrastructure. OSP-002 exam is ideal for individuals who work in the telecommunications industry and have a strong background in outside plant design and installation. The OSP-002 certification provides individuals with the knowledge and skills required to design and install outside plant infrastructure that is reliable, efficient, and cost-effective.

 

OSP-002 Exam Dumps - PDF Questions and Testing Engine: https://www.testsimulate.com/OSP-002-study-materials.html