2024 Latest 100% Exam Passing Ratio - 100-101 Dumps PDF

Pass Exam With Full Sureness - 100-101 Dumps with 85 Questions

NEW QUESTION # 12
Refer to the exhibit.

A person is trying to send a file from a host on Network A of the JAX Company to a server on Network Z of the XYZ Company. The file transfer fails. The host on Network A can communicate with other hosts on Network A.
Which command, issued from router RTA, would be the most useful for troubleshooting this problem?

• A. show history
• B. show flash:
• C. show version
• D. show interfaces
• E. show controllers serial

Answer: D

NEW QUESTION # 13
How will an ad be labeled in Feed?

• A. Sponsored
• B. An icon
• C. Post
• D. Promoted

Answer: A

NEW QUESTION # 14
Which statement describes the process ID that is used to run OSPF on a router?

• A. It is globally significant and is used to identify OSPF stub areas.
• B. It is locally significant and must be the same throughout an area.
• C. It is globally significant and is used to represent the AS number.
• D. It is locally significant and is used to identify an instance of the OSPF database.

Answer: D

NEW QUESTION # 15
An e-commerce company launches a new website. The company wants to build a campaign that optimizes for the audience to take a specific action when visiting the website.
Which campaign objective should the company use to accomplish this goal?

• A. Reach
• B. Traffic
• C. Conversions
• D. Engagement

Answer: C

NEW QUESTION # 16
Which two commands will display the current IP address and basic Layer 1 and 2 status of an interface? (Choose two.)

• A. router#show version
• B. router#show controllers
• C. router#show running-config
• D. router#show protocols
• E. router#show ip interface

Answer: B,D

Explanation:
Router#show protocols displays status of configured Layer 2 and 3 protocols while show controllers Displays statistics for interface hardware including the current IP address

NEW QUESTION # 17

Select three options which are security issues with the current configuration of SwitchA. (Choose three.)

• A. Telnet connections can be used to remotely manage the switch
• B. Inappropriate wording in banner message
• C. Privilege mode is protected with an unencrypted password
• D. Both the username and password are weak
• E. Virtual terminal lines are protected only by a password requirement
• F. Cisco user will be granted privilege level 15 by default

Answer: B,C,D

Explanation:
Explanation/Reference:
This answer can be done by simulation only, don't know user name password and banner message etc Which two of the following are true regarding the configuration of RouterA? (Choose two.)

NEW QUESTION # 18
Which address type does a switch use to make selective forwarding decisions?

• A. source MAC address
• B. source and destination IP address
• C. destination IP address
• D. destination MAC address
• E. source IP address

Answer: D

Explanation:
Switches analyze the destination MAC to make its forwarding decision since it is a layer 2 device. Routers use the destination IP address to make forwarding decisions.

NEW QUESTION # 19
Which data protection law was specifically designed to protect children?

• A. European Data and Privacy Act
• B. GDPR
• C. COPPA
• D. Privacy Shield
• E. CCPA

Answer: C

NEW QUESTION # 20
Refer to the exhibit.

The junior network support staff provided the diagram as a recommended configuration for the first phase of a four-phase network expansion project. The entire network expansion will have over 1000 users on 14 network segments and has been allocated this IP address space.
192.168.1.1 through 192.168.5.255
192.168.100.1 through 192.168.100.255
What are three problems with this design? (Choose three.)

• A. The AREA 3 IP address space is inadequate for the number of users.
• B. The broadcast domain in AREA 1 is too large for IP to function.
• C. The router-to-router connection is wasting address space.
• D. The AREA 1 IP address space is inadequate for the number of users.
• E. AREA 2 could use a mask of /25 to conserve IP address space.
• F. The network address space that is provided requires a single network-wide mask.

Answer: C,D,E

Explanation:
The given IP addresses of areas 1 and 3 along with network masks of 24 cannot accommodate 500 users so are inadequate, while the area 2 is having over capacity so its network mask can be reduced to 25 to accommodate the only 60 users it has.

NEW QUESTION # 21
Refer to the exhibit.

A network has been planned as shown. Which three statements accurately describe the areas and devices in the network plan? (Choose three.)

• A. Network Device B is a switch.
• B. Area 1 contains a Layer 2 device.
• C. Network Device A is a switch.
• D. Network Device A is a hub.
• E. Network Device B is a hub.
• F. Area 2 contains a Layer 2 device.

Answer: B,C,E

Explanation:
Switches use a separate collision domain for each port, so device A must be a switch. Hubs, however, place all ports in the same collision domain so device B is a hub. Switches reside in layer 2 while hubs are layer 1 devices.

NEW QUESTION # 22
What is Audience Network?

• A. Where you can manage your audience options for ads
• B. An insights tool that helps you gain data about your Page followers
• C. A platform that offers ad delivery on other websites and apps
• D. A marketplace to sell and buy items in local areas

Answer: B

NEW QUESTION # 23
After years of advertising on TV, a branding advertiser wants to start running ads on the Facebook App. The advertiser has a TV ad with an emotional message to connect the brand with customers The TV ad lasts 30 seconds.
What is the best creative approach to run this campaign?

• A. Create a 15-second video ad that is vertical with the content used on TV
• B. Create a 20 second video ad with a shorter version of the content used on TV
• C. Create a video ad with the content used on TV
• D. Create a 15-second video ad with the content used on TV

Answer: D

NEW QUESTION # 24
DRAG DROP

Answer:

Explanation:

Explanation:

NEW QUESTION # 25
Most of the audience of a major sports magazine reads its content online and the magazine decides to revamp its website. Which campaign objective should the magazine use?

• A. Reach
• B. Traffic
• C. Catalog Sales
• D. Engagement

Answer: D

NEW QUESTION # 26
DRAG DROP

Answer:

Explanation:

Explanation:

NEW QUESTION # 27
At which layer of the OSI model does the protocol that provides the information that is displayed by the show cdp neighbors command operate?

• A. data link
• B. application
• C. network
• D. transport
• E. physical

Answer: A

Explanation:
CDP is a device discovery protocol that runs over Layer 2 (the data link layer) on all Cisco-manufactured devices (routers, bridges, access servers, and switches) and allows network management applications to discover Cisco devices that are neighbors of already known devices. With CDP, network management applications can learn the device type and the Simple Network Management Protocol (SNMP) agent address of neighboring devices running lower-layer, transparent protocols.

NEW QUESTION # 28
Refer to the exhibit.

What two things can the technician determine by successfully pinging from this computer to the IP address 172.16.236.1? (Choose two)

• A. The correct default gateway IP address is configured on the computer.
• B. The default gateway at 172.16.236.1 is able to forward packets to the internet.
• C. The device with the IP address 172.16.236.1 is reachable over the network.
• D. The network card on the computer is functioning correctly.
• E. The default static route on the gateway router is correctly configured.

Answer: C,D

Explanation:
Explanation/Reference:
The source and destination addresses are on the same network therefore, a default
gateway is not necessary for communication between these two addresses.

NEW QUESTION # 29
Which two statements describe the operation of the CSMA/CD access method? (Choose two.)

• A. After a collision, the station that detected the collision has first priority to resend the lost data.
• B. In a CSMA/CD collision domain, stations must wait until the media is not in use before transmitting.
• C. After a collision, all stations involved run an identical backoff algorithm and then synchronize with each other prior to transmitting data.
• D. In a CSMA/CD collision domain, multiple stations can successfully transmit data simultaneously.
• E. After a collision, all stations run a random backoff algorithm. When the backoff delay period has expired, all stations have equal priority to transmit data.
• F. The use of hubs to enlarge the size of collision domains is one way to improve the operation of the CSMA/CD access method.

Answer: B,E

Explanation:
Ethernet networking uses Carrier Sense Multiple Access with Collision Detect (CSMA/CD), a protocol that helps devices share the bandwidth evenly without having two devices transmit at the same time on the network medium. CSMA/CD was created to overcome the problem of those collisions that occur when packets are transmitted simultaneously from different nodes. And trust me, good collision management is crucial, because when a node transmits in a CSMA/CD network, all the other nodes on the network receive and examine that transmission. Only bridges and routers can effectively prevent a transmission from propagating throughout the entire network! So, how does the CSMA/CD protocol work? Like this: when a host wants to transmit over the network, it first checks for the presence of a digital signal on the wire. If all is clear (no other host is transmitting), the host will then proceed with its transmission. But it doesn't stop there. The transmitting host constantly monitors the wire to make sure no other hosts begin transmitting. If the host detects another signal on the wire, it sends out an extended jam signal that causes all nodes on the segment to stop sending data (think, busy signal). The nodes respond to that jam signal by waiting a while before attempting to transmit again. Backoff algorithms determine when the colliding stations can retransmit. If collisions keep occurring after 15 tries, the nodes attempting to transmit will then time out.

NEW QUESTION # 30
Which option is a valid IPv6 address?

• A. 2001:0000:130F::099a::12a
• B. 2002:7654:A1AD:61:81AF:CCC1
• C. FEC0:ABCD:WXYZ:0067::2A4
• D. 2004:1:25A4:886F::1

Answer: D

Explanation:
Explanation/Reference: http://www.ipv6.com/articles/general/IPv6-Addressing.htm
IPv6 Address Notation
IPv6 addresses are denoted by eight groups of hexadecimal quartets separated by colons
in between them.
Following is an example of a valid IPv6 address:
2001:cdba:0000:0000:0000:0000:3257:9652
Any four-digit group of zeroes within an IPv6 address may be reduced to a single zero or
altogether omitted.
Therefore, the following IPv6 addresses are similar and equally valid:
2001:cdba:0000:0000:0000:0000:3257:9652
2001:cdba:0:0:0:0:3257:9652
2001:cdba::3257:9652
The URL for the above address will be of the form:
http://[2001:cdba:0000:0000:0000:0000:3257:9652]/

NEW QUESTION # 31
Refer to the exhibit.

A network device needs to be installed in the place of the icon labeled Network Device to accommodate a leased line attachment to the Internet. Which network device and interface configuration meets the minimum requirements for this installation?

• A. a router with one Ethernet and one serial interface
• B. a switch with one Ethernet and one serial interface
• C. a switch with two Ethernet interfaces
• D. a router with one Ethernet and one modem interface
• E. a router with two Ethernet interfaces

Answer: A

Explanation:
Only a router can terminate a leased line attachment access circuit, and only a router can connect two different IP networks. Here, we will need a router with two interfaces, one serial connection for the line attachment and one Ethernet interface to connect to the switch on the LAN.

NEW QUESTION # 32
Refer to the exhibit.

As packets travel from Mary to Robert, which three devices will use the destination MAC address of the packet to determine a forwarding path? (Choose three.)

• A. Switch1
• B. Router2
• C. Switch3
• D. Switch2
• E. Router1
• F. Hub1

Answer: A,C,D

Explanation:
Switches use the destination MAC address information for forwarding traffic, while routers use the destination IP address information. Local Area Networks employ Layer 2 Switches and Bridges to forward and filter network traffic. Switches and Bridges operate at the Data Link Layer of the Open System Interconnect Model (OSI). Since Switches and Bridges operate at the Layer 2 they operate more intelligently than hubs, which work at Layer 1 (Physical Layer) of the OSI. Because the switches and bridges are able to listen to the traffic on the wire to examine the source and destination MAC address. Being able to listen to the traffic also allows the switches and bridges to compile a MAC address table to better filter and forward network traffic. To accomplish the above functions switches and bridges carry out the following tasks: MAC address learning by a switch or a bridge is accomplished by the same method. The switch or bridge listens to each device connected to each of its ports and scan the incoming frame for the source MAC address. This creates a MAC address to port map that is cataloged in the switches/bridge MAC database. Another name for the MAC address table is content addressable memory orCAM table. When a switch or bridge is listening o the network traffic, it receives each frame and compares it to the MAC address table. By checking the MAC table the switch/ bridge are able o determine which port the frame came in on. If the frame is on the MAC table the frame is filtered or transmitted on only that port. If the switch determines that the frame is not on the MAC table, the frame is forwarded out to all ports except the incoming port.

NEW QUESTION # 33
What are two recommended ways of protecting network device configuration files from outside network security threats? (Choose two.)

• A. Prevent the loss of passwords by disabling password encryption.
• B. Allow unrestricted access to the console or VTY ports.
• C. Use a firewall to restrict access from the outside to the network devices.
• D. Always use Telnet to access the device command line because its data is automatically encrypted.
• E. Use SSH or another encrypted and authenticated transport to access device configurations.

Answer: C,E

NEW QUESTION # 34
Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0? (Choose two.)

• A. Router(config)# router ospf area 0
• B. Router(config-router)# network 192.168.16.0 255.255.255.0 area 0
• C. Router(config)# router ospf 1
• D. Router(config)# router ospf 0
• E. Router(config-router)# network 192.168.16.0 0.0.0.255 0
• F. Router(config-router)# network 192.168.16.0 0.0.0.255 area 0

Answer: C,F

Explanation:
Explanation In the router ospf command, the ranges from 1 to 65535 so o is an invalid number -> but To configure OSPF, we need a wildcard in the "network" statement, not a subnet mask. We also need to assgin an area to this process -> .

NEW QUESTION # 35
......

Verified 100-101 dumps Q&As - 100% Pass from TestSimulate: https://www.testsimulate.com/100-101-study-materials.html