2024 Correct and Up-to-date Cisco 200-901 BrainDumps
Current 200-901 dumps Preparation through Our Practice Test
To prepare for the Cisco 200-901 Exam, candidates can take advantage of various resources, including study materials, online courses, and practice exams. Cisco offers a range of training courses and study materials, including online courses, instructor-led training, and self-paced learning. There are also many third-party resources available on the Internet, such as study guides, practice exams, and online forums, where candidates can discuss and share their experiences with others who are preparing for the exam.
NEW QUESTION # 147
Which detail is included in a routing table?
- A. TCP or UDP port number
- B. IP protocol
- C. Broadcast address
- D. Destination next hop or outgoing interface
Answer: D
Explanation:
TCP and UDP are not included in the routing table.
https://geek-university.com/ccna/routing-table-explained/
NEW QUESTION # 148
Which API is used to obtain data about voicemail ports?
- A. Webex teams
- B. Webex devices
- C. Cisco Unified Communications manager
- D. Finesse gadgets
Answer: C
Explanation:
Cisco Unified Communications Manager (CUCM) provides API access to data management, call management, and voicemail integration.
https://developer.cisco.com/certification/fundamentals/
NEW QUESTION # 149
A developer is trying to retrieve data over a REST API. The API server responds with an HTTP client error response code. After investigating the response the developer realizes the realizes the response has a Retry-After header. What is the root cause of this error?
- A. An appliance limited the rate of requests to the transport layer.
- B. Too many requests were sent to the REST service in a given amount of time.
- C. The REST service is unreachable at the time of the REST request
- D. An appliance limited the rate of requests to the application layer
Answer: B
Explanation:
The HTTP client error response code accompanied by a Retry-After header typically indicates that the client has sent too many requests in a given amount of time, leading to rate limiting by the server. This is often indicated by a 429 Too Many Requests status code. The Retry-After header informs the client how long it should wait before making another request.
References:
* Cisco DevNet Associate Study Guide: REST API Error Handling (Chapter 7, Section: Understanding HTTP Status Codes).
NEW QUESTION # 150
Drag and Drop Questions
Refer to the exhibit. Drag and drop the code snippets from the bottom onto the blanks in the code to construct a request to find the Cisco DNA Center switch count. Not all options are used.

Answer:
Explanation:
NEW QUESTION # 151
Drag and Drop Question
Drag and drop the code from the bottom onto the box where the code is missing to obtain a list of network devices by using the Cisco Meraki API. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 152
Which two protocols are used to apply a configuration change on a Cisco IOS XE device? (Choose two)
- A. CDP
- B. RESTCONF
- C. NETCONF
- D. HSRP
- E. CCX
Answer: B,C
NEW QUESTION # 153 
Refer to the exhibit. Drag and drop the code snippets from the bottom to the blanks in the code to enable keepalive for the FastEthernet 2/0 interface. Not all options are used.
Answer:
Explanation:
Explanation
NEW QUESTION # 154 
Refer to the exhibit. Drag and drop the code from the bottom onto the box where the code is missing to return the number of interfaces on a network device by using the Cisco DNA Center SDK. Not all options are used.
Answer:
Explanation:
Explanation
NEW QUESTION # 155
Refer to the exhibit.

A developer is troubleshooting an API with the given API with the given API documentation and cURL command. What is the cause of this problem?
- A. The authorization header is missing or incomplete
- B. The API token specified is expired
- C. The request body is missing or incomplete
- D. The user is not allowed to post massages from their account
Answer: B
NEW QUESTION # 156
What is a feature of Cisco Modeling Labs?
- A. Automate simulations that connect to external networks.
- B. Practice administration skills for exam certification.
- C. Design and test against virtual network equipment.
- D. Create and manage user groups to control lab access.
Answer: C
NEW QUESTION # 157
Refer to the exhibit. What do all the calls shown in the sequence diagram have in common?
- A. All the calls are synchronous.
- B. All the calls depend on the catalog.
- C. All the calls are optional.
- D. All the calls are asynchronous.
Answer: D
Explanation:
A synchronous message is denoted by the solid arrowhead. An asynchronous message is denoted by line arrowhead. There might be also the asynchronous return message which is denoted by the dashed line (not in a diagram here).
Here all the messages are denoted by line arrowhead so that means all the messages are asynchronous.
NEW QUESTION # 158
Which tool allows changes to the configuration management toolset to be tested?
- A. Ansible
- B. NAPALM
- C. Cisco VIRL
- D. pyATS
Answer: D
NEW QUESTION # 159
Refer to the exhibit.
OR
An administrator attempts to perform a GET using the Cisco IOS XE RESTOCNF API to return the hostname of a device. The sequence diagram illustrated the HTTP message observed. Which change to the API request resolves the issue?
- A. Remove the -H 'Accept: application/yang-data^/son' HTTP header because it is not required.
- B. Use -u cisco: cisco instead of -u 'cisco: cisco'.
- C. Change the request method from -X "GET" to- X' POST".
- D. Add Content-Type HTTP header with 'application/yang-data+json' using -H 'Content-Type:
application/yang-data+json'.
Answer: B
NEW QUESTION # 160 
Refer to the exhibit. Which type of route does R1 use to reach host 10.10.13.10/32?
- A. host route
- B. network route
- C. floating static route
- D. default route
Answer: B
Explanation:
Section: Network Fundamentals
NEW QUESTION # 161
A developer is creating a script to interact with a REST API service which requires basic authentication. The credentials are "devnet:391665405" and the Base64 encoding of the credentials is
"GV2bmV0dXNlcjpDaXNj=". Which payload and header combination must be used for authentication?
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: B
Explanation:
Explanation
https://developer.cisco.com/docs/epnm/#!how-to-authenticate/authorization
NEW QUESTION # 162
Refer to the exhibit.
An engineer sends the request to collect data over Cisco AMP for Endpoints API. The Engineer must list guide and hostname data for all computers, but the first request returns only 500 items out of 2,000. Then, the engineer adds the loop to collect all the data. What must be added to the script where the code is missing to complete the requests?
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: A
Explanation:
To complete the requests and retrieve all the data, the correct code that needs to be added is next_url = response_json['metadata']['links']['next']. This ensures that the script retrieves the URL for the next set of data from the 'links' object within the 'metadata' section of the JSON response. This allows the loop to continue until all data is collected.
Reference: Cisco DevNet Associate documentation on working with APIs and handling paginated responses.
NEW QUESTION # 163
Refer to the exhibit. The YANG module devnet-users shows a data model for user accounts.
Which code snippet shows the XML representation of an instantiation of the YANG data model?
- A.

- B.

- C.

- D.

Answer: B
NEW QUESTION # 164
Which model-driven programmability protocol does Cisco IOS XE Software support?
- A. SOAP
- B. gNMI
- C. SSH
- D. CORBA
Answer: B
NEW QUESTION # 165
How does a developer create and switch to a new branch called "my-bug-fix" to develop a product fix?
- A. git branch -b my-bug-fix
- B. git branch my-bug-fix
- C. git checkout my-bug-fix
- D. git checkout -b my-bug-fix
Answer: D
Explanation:
https://www.shellhacks.com/git-create-new-branch-and-checkout/
NEW QUESTION # 166
Drag and Drop Question
Drag and drop the steps from the left into order on the right to create a common CI/CD pipeline process. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 167
Refer to the exhibit.
What does the command marked (2) do when it is run?
- A. It does not delete the branch until it is merged.
- B. It deletes the "test" branch only if a new branch is created.
- C. It deletes the "test" branch.
- D. It duplicates the test" branch.
Answer: C
NEW QUESTION # 168
......
100% Reliable Microsoft 200-901 Exam Dumps Test Pdf Exam Material: https://www.testsimulate.com/200-901-study-materials.html