100% Pass Your 2V0-41.20 Exam Dumps at First Attempt with TestSimulate

Penetration testers simulate 2V0-41.20 exam PDF

NEW QUESTION 34
When deploying east-west network introspection, which Service Virtual Machine (SVM) deployment method achieves the least amount of traffic hair pinning?

• A. Place a partner SVM on each compute cluster node.
• B. Create a secondary vNIC on each quest VM for SVM communication.
• C. Centralize partner SVMs in a service cluster.
• D. Add partner SVMs to an edge cluster.
  "For SVMs deployed on compute hosts, an SVM does not need to be installed on every host. Some customers prefer to deploy the partner SVM on each host to achieve the least amount of traffic hairpinning. When the partner SVM is deployed in a service cluster, traffic is sent from the compute hosts across the overlay to the hosts in the service cluster."

Answer: A

 

NEW QUESTION 35
Which three teaming policy modes are supported by NSX-T Data Center? (Choose three.)

• A. Destination Port
• B. Destination MAC
• C. Failover Order
• D. Load Balanced Source MAC
• E. Load Balanced Source
• F. Load Balanced Source IP

Answer: C,D,E

 

NEW QUESTION 36
Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node?

• A. tcpdump
• B. debug
• C. ipconfig
• D. ifconfig

Answer: D

Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-B7E7371E-A9F6-4880-B184-E00A62C0C818.html

 

NEW QUESTION 37
What are three characteristics of a transport zone? (Choose three.)

• A. configured with multiple N-VDS
• B. defines the potential reach of transport nodes
• C. optional for creating a segment
• D. defines the scope and reachability of a Segment
• E. configured with a Single N-VDS

Answer: B,D,E

 

NEW QUESTION 38
Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node?

• A. tcpdump
• B. debug
• C. ipconfig
• D. ifconfig

Answer: D

Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-B7E7371E-A9F6-4880-B184-

 

NEW QUESTION 39
An NSX administrator is using ping to check connectivity between VM1 running on ESXi1 to VM2 running on ESXi2. The ping tests fails. The administrator knows the maximum transmission unit size on the physical switch is 1600.
Which command does the administrator use to check the VMware kernel ports for tunnel end point communication?

• A. esxcli network diag ping -H <destination IP address>
• B. esxcli network diag ping -I vmk0 -H <destination IP address>
• C. vmkping ++netstack=geneve -d -s 1572 <destination IP address>
• D. vmkping ++netstack=vxlan-d -s 1572 <destination IP address>

Answer: D

 

NEW QUESTION 40
When running nsxcli on an ESXi host, which command will show the Replication mode?

• A. get logical-switches
• B. get logical-switch <Logical-Switch-UUID>
• C. get logical-switch status
• D. get logical-switch <Local-Switch-UUID> status

Answer: B

Explanation:
Explanation
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646

 

NEW QUESTION 41
Which CLI command would an administrator use to allow syslog on an ESXi transport node when using the esxcli utility?

• A. esxcli network firewall ruleset set -r syslog -e true
• B. esxcli network firewall ruleset set -r sysloq -e false
  Reference: https://docs.vmware.com/en/VMware-NSX-T-Data-Center/2.2/nsxt_22_troubleshoot.pdf
• C. esxcli network firewall ruleset -e syslog
• D. esxcli network firewall ruleset set -a -e false

Answer: A

 

NEW QUESTION 42
A customer has a network where BGP has been enabled and the BGP neighbor is configured on the Tier-0 Gateway. A NSX-T Data Center administrator used the get logical-routers command to retrieve this information:

Which two commands must be executed to check BGP neighbor status? (Choose two.)

• A. vrf 4
• B. sa-nsxedge-01(tier0_dr)> get bgp neighbor
• C. vrf 1
• D. sa-nsxedge-01(tier0_sr)> get bgp neighbor
• E. vrf 3
• F. sa-nsxedge-01(tier1_sr)> get bgp neighbor

Answer: D,E

 

NEW QUESTION 43
A security administrator needs to configure a firewall rule based on the domain name of a specific application. Which field in a distributed firewall rule does the administrator configure?

• A. Source
• B. Profile
• C. Service
• D. Policy

Answer: B

 

NEW QUESTION 44
Which tool injects packets and provides various observation points along the packet's path between two NSX-T managed objects?

• A. Port Mirroring
• B. SPAN mirrors
• C. IPFIX
  Reference: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=7&ved=2ahUKEwjw0duct_nmAhUJ1BoKHVrgACcQFjAGegQIBxAC&url=ftp%3A%2F%2Fftp.inwinstack.com%2FOther%2FAI-NSX-T%2FVMware% 2FVMWare%2520NSX-T%2FDocuments% 2Fnsxt_21_admin.pdf&usg=AOvVaw2DqQfqPkhzWQfiJP2SgNbO (213) Reference: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=7&ved=2ahUKEwjw0duct_nmAhUJ1BoKHVrgACcQFjAGegQIBxAC&url=ftp%3A%2F%2Fftp.inwinstack.com%2FOther%2FAI-NSX-T%2FVMware% 2FVMWare%2520NSX-T%2FDocuments% 2Fnsxt_21_admin.pdf&usg=AOvVaw2DqQfqPkhzWQfiJP2SgNbO (213)
• D. Traceflow

Answer: D

 

NEW QUESTION 45
Which three protocols could an NSX administrator use to transfer log messages to a remote log server? (Choose three.)

• A. SSL
• B. HTTPS
• C. TCP
• D. SSH
• E. UDP
• F. TLS

Answer: C,E,F

Explanation:
Reference:
https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/certification/vmware-2vo-41.20-exam-prep-guide.pdf

 

NEW QUESTION 46
Which two statements are true for a Tier-1 Gateway? (Choose two.)

• A. owned and configured by Service Provider
• B. supports ECMP
• C. connects to physical networks
• D. owned and configured by the Tenant
• E. always configured in active-standby mode

Answer: C,E

 

NEW QUESTION 47
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.
Which message ID (msgid) should be used in the syslog export configuration command as a filter?

• A. MONITORING
• B. FABRIC
• C. GROUPING
• D. SYSTEM

Answer: B

 

NEW QUESTION 48
When running nsxclion an ESXi host, which command will show the Replication mode?

• A. get logical-switches
• B. get logical-switch <Logical-Switch-UUID>
• C. get logical-switch status
• D. get logical-switch <Local-Switch-UUID> status

Answer: B

Explanation:
Explanation/Reference:

 

NEW QUESTION 49
......

All 2V0-41.20 Dumps and Training Courses: https://www.testsimulate.com/2V0-41.20-study-materials.html