Virtualization Technical Support for AIX and Linux - v2 (000-109) Free Practice Test

Question 1

An administrator has configured NTP on the HMC using the hostname of a public NTP server and restarts the HMC. When the /var/log/ntp file is checked, the synchronization with the time server has not occurred. What is the most likely cause?

A. The time server needs to be specified by IP address on an HM

B. The "chhmc -c xntp -s start" command needs to be run.

C. NTP has been configured on the private network.

D. The firewall needs to be opened for xntp.

Correct Answer: D

Question 2

A company has purchased a Power 770 server and will be implementing a virtual environment for transaction processing. What method can be used to configure the new system to easily allow for an identical environment at a disaster recovery site?

A. Maintain the primary and recovery site with IBM Systems Director.

B. Deploy a sysplan that was created by the System Planning Tool.

C. Record the profile information for each partition.

D. Perform remote VIO server backups to the disaster recovery site.

Correct Answer: B

Question 3

After a hardware failure, a VIO server has been restored from a mksysb image on a NIM server. When the VIO server boots, the client LPARs have no network access?
What is the cause of this problem?

A. The backupios command was not run correctly.

B. The VIO server was configured to remain as a NIM client.

C. The client LPAR virtual network adapters have not been recreated

D. Automatic device recovery is not supported by NIM restores.

Correct Answer: B

Question 4

A secondary site is being deployed for application availability and site failover. Servers of identical model and type have been ordered and delivered to the new location.
Additional PowerVM activation keys were obtained for the original location to allow more than 32000 WWNs and enable Active Memory Sharing (AMS).
How can the duplicate systems be updated to enable these additional features?

A. Contact IBM Support to generate the one-time password required to administer the PowerVM activation keys.

B. Create a system plan of the existing configuration and deploy this to the duplicate configuration.

C. Activation keys are generated for a specific system and must be generated for each new server in the failover site.

D. The activation keys must be exported using the PowerVM option within the Capacity On Demand (CoD) panel on the HMC.

Correct Answer: C

Question 5

A company needs to implement a virtual environment on a Power 770 server using a Virtual I/O Server and a large number of clients. What network solution can be implemented on the Virtual I/O Server to maximize bandwidth for the clients?

A. Shared Ethernet Adapter failover

B. Link Aggregation

C. VLAN mapping

D. Network Interface Backup

Correct Answer: B

Question 6

An architect has been given the task of incorporating some new Power Systems servers running AIX 7 into an existing data center which is supported by a legacy SAN.
The new servers will need to be connected to the SAN, and the LPARs on the servers will each have access to a Fibre Channel Tape using virtualized devices.
Which action will the architect need to take?

A. Put the tape drive into the same zone as the HBA in the VIOS.

B. Check that the SAN switches support NPIV.

C. Specify that AIX Enterprise Edition must be used.

D. Use the legacy Fibre Channel device driver in AIX.

Correct Answer: B

Question 7

What is the default weight when creating an uncapped, shared processor LPAR?

A. 256

B. 128

C. 32

D. 64

Correct Answer: B

Question 8

An administrator is attempting to install a VIO server on a Power 750, but is unable to connect remotely to the console session. How can this be resolved?

A. Use the vtmenu command to enable the virtual connection for the server.

B. Select the option to enable remote operation

C. Select the option to enable remote virtual terminal connections.

D. Ensure the remote console daemon is running on the host.

Correct Answer: C

Question 9

An administrator is designing a new system. Redundancy is critical, and cost must be kept as low as possible.
The system planned is a Power 770 with 2 enclosures, each with a 10Gb IVE. It will support 6 dedicated production LPARs, 8 development LPARs, and 2 VIO Servers.
Production and development networks must be separate from each other.
Which of the following network solutions supports the requirements above?

A. Allocate Integrated Virtual Ethernet adapters ports to the VIO Servers Configure a Shared Ethernet Adapter for production and another for development Allocate virtual network devices to LPARs

B. Use dedicated Ethernet cards in each Production LPAR using Ether channel Allocate two dedicated Ethernet cards to the VIO Servers Create a SEA and use for development LPARs

C. Run dedicated adapters in the VIO Servers Configure a Shared Ethernet Adapter for production and another for development Allocate virtual network devices to LPARs.

D. Utilize the Integrated Virtual Ethernet adapter in each enclosure Allocate 1 logical port from each IVE in each enclosure to each LPAR and VIO Server Configure 802.1Q on each LPAR

Correct Answer: D

Question 10

An administrator needs to install AIX on 50 LPARs on a new Power 795. All partitions require the same level of customization and the same version of AIX. For security reasons, NIM cannot be used in this environment.
The new system has a single DVD RAM drive. A Single VIO partition has already been configured.
Which of the following will allow the administrator to install the partitions in the shortest possible time?

A. Allocate a DVD RAM device to the first partition.
Build and customize the first partition.
Create a mksysb of the partition to DVD RAM.
Use the DVD RAM image to install the remaining partitions.

B. Build and customize the first partition from DVD RAM.
Create a mksysb and use to build a bootable ISO image.
Install the ISO image in the virtual media library on a VIO server partition.
Install remaining clients using image mapped from virtual media library.

C. Map a virtual optical DVD RAM device from the HMC to the first parttion.
Build and customize the first partition.
Create a mksysb of the partition to DVD RAM
Use the DVD RAM image to install the remaining partitions.

D. Build and customize the first partition from DVD RAM.
Create a mksysb of the partition and copy to the HMC.
Configure NIMOL on the HMC.
Install the remaining clients using NIMOL.

Correct Answer: B

Welcome to TestSimulate

IBM Virtualization Technical Support for AIX and Linux - v2 (000-109) Free Practice Test