VCE Vblock® Systems Deployment and Implementation - Compute (210-020) Free Practice Test

Question 1

Which service profile template is used to update a blades firmware?

A. Updating template

B. vNIC template

C. Power template

D. vHBA template

Correct Answer: A

Question 2

A blade is stuck in the discovery state.
Which action should you perform to resolve the problem?

A. Decommission the blade.

B. Reset CMOS for the blade.

C. Reset the blade.

D. Re-acknowledge the blade.

Correct Answer: D

Question 3

Click the Exhibit button.

VCE 210-020 Exam
A client has added a new chassis and connected ports 13 through 16 on both fabrics to the I/O modules. The client has verified the Twinax cabling. The Chassis/FEX Discovery Policy is set to 4 Link. However, the new chassis still fails the discovery process.
Referring to the exhibit, what would resolve the problem?

A. Enable the Administratively down ports.

B. Configure the links as uplink ports.

C. Reset the I/O modules.

D. Configure the links as server ports.

Correct Answer: D

Question 4

During a Vblock System 340 deployment, you power on all of the pre-installed ESXi servers. All but one server boots successfully. You notice the boot device is not visible to the UCS blade server.
What would be the cause of the problem?

A. The SAN boot target includes a WWPN that is not properly zoned.

B. The boot policy is not properly configured with the correct boot LUN ID.

C. The Fibre Channel ports are not configured in the Cisco UCS.

D. The Cisco UCS fabric interconnects are not logged into the Fibre Channel switch.

Correct Answer: A

Question 5

A production UCS environment is receiving hardware upgrades. You perform a software upgrade from version 2.0 to version 2.1.1e. After completing the upgrade tasks successfully, the systems starts reporting several alerts shown below:
Fault Code:F0502 Message DIMM invalid FRU DIMM
Fault Code:F0801 Message Processor invalid FRU Processor
Fault Code:F0200 Message Adapter unidentified FRU Adapter
Which action will resolve the alerts?

A. Reboot both fabric interconnects, one at a time.

B. Update the Capability Catalog.

C. Change the log settings level to report errors only.

D. Reinstall the Infrastructure Software Bundle package.

Correct Answer: B

Question 6

Which statement is correct about WWPN pools?

A. WWPNs are tied to UUIDs.

B. WWPNs are tied to vHBAs.

C. WWPNs are tied to VLANs.

D. WWPN pools are tied to vNICs.

Correct Answer: B

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 7

Which three UCS template types must be created when performing a Vblock System 720 logical build? (Choose three.)

A. vNIC template

B. SAN connectivity template

C. service profile template

D. LAN connectivity template

E. vHBA template

Correct Answer: A,C,E

Question 8

Each UCS chassis in a Vblock System 300 is connected to two POUs.
What is the VCE recommended setting for the power policy?

A. n+1

B. switched power supply

C. non-redundant

D. grid

Correct Answer: D

Question 9

A customer wants you to install two Vblock System 340s. When you connect the second system to the customer's network, you begin seeing intermittent network connectivity problems.
What is the problem?

A. The Vblock System 340s have duplicate MAC addresses.

B. The firmware versions of the fabric interconnects are different.

C. The Vblock System 340s have duplicate WWPNs.

D. The firmware versions of the Nexus 5548 switches are different.

Correct Answer: A

Question 10

During a Vblock System 720 deployment, the customer asks you to change the boot LUN for a pair of ESXi test servers. They want to preserve the existing configuration while testing the latest version of ESXi on a larger boot device. You have provisioned the devices from the storage array by simply adding the device to the correct storage group.
What must be done to allow the new devices to be installed with the latest version of ESXi so the host will boot?

A. Modify the storage group on the VMAX to change the LUN ID between the two devices.

B. Modify the boot policy associated with the service profile to boot from LUN ID (1).

C. Modify the storage group on the VMAX to remove the LUN ID (0).

D. Create a new boot policy and associate it with a service profile to boot from LUN ID (1).

Correct Answer: D

Welcome to TestSimulate

VCE Vblock® Systems Deployment and Implementation - Compute (210-020) Free Practice Test