VCE Vblock System Deployment and Implementation - Virtualization (210-015) Free Practice Test

Question 1

Which operating system requires additional binaries to apply virtual machine customization

A. Red Hat Linux

B. Microsoft Windows 2008

C. Microsoft Windows 2003

D. Microsoft Windows 7

Correct Answer: C

Question 2

When installing the virtual Ethernet module (VEM) for a Nexus 1000V, which two software installation methods would be used for ESXi host configuration? (Choose two.)

A. Install the VIB remotely using the esxcli.

B. Install the VIB using the Nexus 1000V Web interface.

C. Install the VEM from the OVF template.

D. Install with the VMware Update Manager (VUM).

Correct Answer: A,D

Question 3

You are working with a customer to enable VMware Fault Tolerance on a number of virtual machines and you encounter the error shown below on one of them.
The Fault Tolerance configuration of the entity SalesVM has an issue Fault Tolerance not supported by host hardware
What is the cause for this error?

A. Fault Tolerance is only supported on specific processors and BIOS settings with Hardware Virtualization enabled.

B. Fault Tolerance requires that the hosts for the primary and secondary virtual machines use the same type of CPU.

C. The virtual machine is running VMI kernel and is paravirtualized.

D. This virtual machine is on a host that is not in a vSphere HA cluster or it has had vSphere HA disabled.

Correct Answer: A

Question 4

In a Vblock 320 Unified Networking environment, a UCS service profile is unable to locate its boot device.
Which two statements are valid troubleshooting steps? (Choose two.)

A. Verify that the vHBAs are logging into the SAN fabrics by examining the Fabric Login (FLOGI) database on the Cisco MDS switches.

B. Verify that PowerPathVE can see all paths to the device.

C. Verify that the vHBAs are logging into the SAN fabrics by examining the Fabric Login (FLOGI) database on the Cisco Nexus 5000 series switches.

D. Verify that the targets in the SAN boot policy match the zoning and the masking on the array.

Correct Answer: C,D

Question 5

Which CDDVD connection mode would be used only for remote client device access?

A. Emulate IDE

B. Host Device

C. Data store ISO File

D. Passthrough IDE (raw)

Correct Answer: D

Question 6

You are preparing to upgrade the Vblock System to the latest release certification matrix and have a custom ISO file for the vSphere ESXi build on the vCenter server in the DTemp folder.
Which process would you use to build and attach a host upgrade baseline?

A. Ensure you have Upload file privileges; launch vCenter; open VUM; import the ESXi image; attach the baseline to the target; create a baseline image.

B. Launch vCenter; import the ESXi image; ensure you have Upload file privileges; open VUM; create a baseline image; attach the baseline to the target.

C. Launch vCenter; ensure you have Upload file privileges; open VUM; import the ESXi image; create a baseline image; attach the baseline to the target.

D. Launch vCenter; import the ESXi image; ensure you have Upload file privileges; open VUM; create a baseline image; attach the baseline to the target.

Correct Answer: C

Question 7

Which statement is correct about using VMware Inventory Services?

A. It improves administrative user performance and reduces traffic with the vCenter.

B. It tracks virtual machine locations in the data center.

C. It tracks data center objects and performs reports.

D. It improves virtual machine responsiveness.

Correct Answer: A

Question 8

A vApp has been deployed with the wrong IP address information and must be updated. You have logged into the virtual machine, and updated the static IP address from the console, validating connectivity. After a system reboot, users are no longer able to connect to the system.
What is the problem?

A. vApps require DHCP assigned addresses instead of static.

B. The segment ID was incorrectly configured for the VXLAN.

C. The IP configuration should take place in the vSwitch layer.

D. The IP configuration should take place in the vApp container.

Correct Answer: D

Question 9

You are asked to restore a virtual machine from a SAN array snapshot.
Which two actions must you perform to present the LUN to the ESXi host to make the data available? (Choose two.)

A. Restore the LUN to the ESXi host.

B. Force mount the copy of the LUN if you are sure the original is not in use.

C. Add the copy of the LUN to the ESXi host using the format option.

D. Resignature the copy of the LUN if the original is still in use.

Correct Answer: B,D

Question 10

In which document would you find information regarding issues encountered with software revisions?

A. VCE Logical Build Guide

B. VCE Vblock Administration Guide

C. VCE Release Certification Matrix

D. VCE Release Notes

Correct Answer: D

Welcome to TestSimulate

VCE Vblock System Deployment and Implementation - Virtualization (210-015) Free Practice Test