We have introduced too much details about our 070-544 test simulates: TS: Ms Virtual Earth 6.0, Application Development on the other page about Self Test Software & Online Enging. If learners are interested in our 070-544 study guide and hard to distinguish, we are pleased to tell you alone. Below we will focus on your benefits if you become our users.

Firstly, we want to stress that our 070-544 test simulates: TS: Ms Virtual Earth 6.0, Application Development are valid as we are researching Microsoft exams many years. Most our experts are experienced and familiar with the real questions in past ten years. We know the key knowledge materials about 070-544 exam so that we can always compile valid exam study guide. We are skilled at Microsoft exams with so many years' development. We have stable & high passing rate for Microsoft exams recent years. If you pay attention on our exam study guide after purchasing, you should not worry too much, our products will assist you to clear exam easily. We will assist you to prepare well until you pass exam.

DOWNLOAD DEMO

Secondly, our products are high-quality. Our value is obvious to all:
1. PDF version of 070-544 study guide is available for you to print out and note your studying thoughts on paper. Self Test Software and Online Enging of 070-544 study guide have simulation functions which is not only easy for you to master our questions and answers better but also make you familiar with exam mood so that you will be confident.
2. Our 070-544 test simulates materials make you do sharp and better target preparation for your real exam. This ways will cut off your preparation time. Your learning will be proficient.
3. One-shot pass with help of our 070-544 test simulates materials will make you save a lot of time and energy. As exam fee is expensive, you may not want to pay twice or more.
4. 365 Days Free Updates Download: you will not miss our valid 070-544 study guide, and also you don't have to worry about your exam plan. One year is enough for you to do everything.

Thirdly, About Payment & Refund: we only support Credit Card for most countries. Our purchasing procedure of 070-544 test simulates materials is surely safe. If you find any unusual or extra tax & fee please contact us soon. Our promise is "Money Back Guaranteed". Please rest assured. We are legal authoritative company. If you fail exam unluckily and apply for refund, we will refund to you soon. You are not allowed to waste one penny on useless products.

Fourthly, About Discount: as we put into much money on information resources and R&D, all our experts are highly educated and skilled so that our 070-544 test simulates materials receive recognition with its high pass-rate from peers and users. Our price is really reasonable. If you really want some discount, you can pay attention on holiday activities. Or if you are regular customers and introduce our 070-544 study guide to others we will give you some discount.

Microsoft TS: Ms Virtual Earth 6.0, Application Development Sample Questions:

1. You need to draw a straight red line between the start and end points of a calculated route.
Which code segment should you use?

A) var locationArray = new Array(); var len = route.Itinerary.Segments.length; locationArray.push(route.Itinerary.Segments[0].LatLong);
locationArray.push(route.Itinerary.Segments[len-1].LatLong); shape = new
VEShape(VEShapeType.Polyline, locationArray); shape.SetLineColor(new VEColor(255, 0,
0, 0.5)); shape.HideIcon(); layer.AddShape(shape);
B) var locationArray = new Array(); var len = route.Itinerary.Segments.length; locationArray.push(route.Itinerary.Segments[0].LatLong);
locationArray.push(route.Itinerary.Segments[len].LatLong); shape = new
VEShape(VEShapeType.Polyline, locationArray); shape.SetLineColor(new VEColor(255, 0,
0, 0)); shape.HideIcon(); layer.AddShape(shape);
C) var locationArray = new Array(); var len = route.Itinerary.Segments.length; locationArray.push(route.Itinerary.Segments[0].LatLong);
locationArray.push(route.Itinerary.Segments[len-1].LatLong); shape = new
VEShape(VEShapeType.Polyline, locationArray); shape.SetLineColor(new VEColor(255, 0,
0, 0)); layer.AddShape(shape);
D) var locationArray = new Array(); var len = route.Itinerary.Segments.length; locationArray.push(route.Itinerary.Segments[1].LatLong);
locationArray.push(route.Itinerary.Segments[len].LatLong); shape = new
VEShape(VEShapeType.Pushpin, locationArray); shape.SetLineColor(new VEColor(255,
0, 0, 0.5)); layer.AddShape(shape);

2. You are creating a Web application by using the Virtual Earth 6.0 map control.
A Web page of the application loads a map of a predefined location by using the following code segment.
var map = null;
var defView1= new VEMapViewSpecification(new
VELatLong(40.689167,-74.04472), 16, 360, -45, 0);
function GetMap(){
map = new VEMap('myMap');
map.LoadMap();
map.SetMapView(defView1);
map.SetMapStyle('h')
map.SetMapMode(VEMapMode.Mode3D);
}
You need to display a zoomed out view of the main map in a separate control on the same
Web page.
Which code segment should you use?

A) map.ShowMiniMap(50, 300);
B) map2=new VEMap('myOverViewMap'); defView1=map.GetMapView(); var
zL=map.GetZoomLevel(); map2.LoadMap(); map2.SetMapView(defView1); zL=zL-6; map2.SetZoomLevel(zL);
C) map2=new VEMap('myOverViewMap'); defView1=map.GetMapView(); var
zL=map.GetZoomLevel(); map.ShowControl('myOverViewMap');
map2.SetMapView(defView1); zL=zL-6; map2.SetZoomLevel(zL);
D) map2= map.ShowMiniMap(50, 300); defView1=map.GetMapView(); var
zL=map.GetZoomLevel(); map2.LoadMap(); map2.SetMapView(defView1); zL=zL-6; map2.SetZoomLevel(zL);

3. You need to configure the settings of your Virtual Earth 6.0 map to display apartments at a specified location using the bird's eye view. What are two possible code segments you can use to achieve this goal? (Each correct answer presents a complete solution. Choose two.)

A) map = new VEMap('mymap '); map.LoadMap(new VELatLong(47.6, -122.33), 10, 'o', false);
B) map = new VEMap('mymap '); map.LoadMap(new VELatLong(47.6, -122.33), 10, 'h', true);
C) map = new VEMap('mymap '); map.LoadMap(new VELatLong(47.6, -122.33), 10);
D) map = new VEMap('mymap '); map.LoadMap(new VELatLong(47.6, -122.33), 10, 'o', false); map.SetMapStyle(VEMapStyle.Aerial);
E) map = new VEMap('mymap'); map.LoadMap(VELatLong(47.6, -122.33), 10); map.SetMapStyle(VEMapStyle.Birdseye);

4. You need to add a reference of the Virtual Earth 6.0 map control to a Web page of an application. What should you do?

A) Use the following code segment. <script type="text/javascript" src="http:
//dev.virtualearth.net/mapcontrol/mapcontrol.ascx?v=6"></script>
B) Use the following code segment. <script type="text/javascript" src="http:
//dev.virtualearth.net/mapcontrol/mapcontrol.asmx?v=6"></script>
C) Use the following code segment. <script type="text/javascript" src="http:
//dev.virtualearth.net/mapcontrol/mapcontrol.ashx?v=6"></script>
D) Use the following code segment. <script type="text/Javascript" src="http:
//dev.virtualearth.net/mapcontrol/v6/mapcontrol.js"></script>

5. You are creating a North American reverse geocoding application by using the Microsoft
MapPoint Web Service. The application must convert the latitude and longitude coordinates of a point on the map into a string that contains the city, province/state, and country. You need to obtain the string in the following format: "city, province/state, country". Which code segment should you use?

A) Dim getInfoOptions As New GetInfoOptions() getInfoOptions.IncludeAddresses = True getInfoOptions.IncludeAllEntityTypes = False getInfoOptions.EntityTypesToReturn = New
String() {"PopulatedPlace"} Dim locations As List(Of Location) = _
findService.GetLocationInfo(origin, "MapPoint.NA", getInfoOptions) Dim address As String
= locations(0).Entity.DisplayName
B) Dim getInfoOptions As New GetInfoOptions() getInfoOptions.IncludeAddresses = True getInfoOptions.IncludeAllEntityTypes = False getInfoOptions.EntityTypesToReturn = New
String() {"AdminDivision1"} Dim locations As List(Of Location) = _
findService.GetLocationInfo(origin, "MapPoint.NA", getInfoOptions) Dim address As String
= locations(0).Entity.DisplayName
C) Dim getInfoOptions As New GetInfoOptions() getInfoOptions.IncludeAddresses = False getInfoOptions.IncludeAllEntityTypes = False getInfoOptions.EntityTypesToReturn = New
String() {"PopulatedPlace"} Dim locations As List(Of Location) = _
findService.GetLocationInfo(origin, "MapPoint.NA", getInfoOptions) Dim address As String
= locations(0).Entity.DisplayName
D) Dim getInfoOptions As New GetInfoOptions() getInfoOptions.IncludeAddresses = True getInfoOptions.IncludeAllEntityTypes = True Dim locations As List(Of Location) = _ findService.GetLocationInfo(origin, "MapPoint.NA", getInfoOptions) Dim address As String
= locations(0).Entity.DisplayName

Solutions: