TS: Exchange Server 2007, Configuring (70-236) Free Practice Test

Question 1

You have an Exchange Server 2007 environment. You need to perform a snapshot of a mailbox database. What should you do?

A. Use the Vssadmin.exe command-line tool.

B. Use the Eseutil.exe command-line tool.

C. Run the Clean-MailboxDatabase cmdlet.

D. Run the Set-StorageGroup cmdlet.

Correct Answer: A

Question 2

U sers report that legitimate e-mail messages are being delivered to their Microsoft Office Outlook Junk E-mail folders . You confirm that the e-mail addresses of the message senders were on the Outlook Safe Senders List . You need to allow user -defined S afe Senders L ists to be used during the Exchange Edge Transport server message delivery .
What should you do?

A. On the Edge Transport server content filter configuration, enable authenticated message bypass.

B. On the Mailbox server content filter configuration, enable Outlook E-mail Postmark validation.

C. Run the Update-SafeList cmdlet for each users mailbox on the Mailbox server.

D. Enable anti-spam updates on the Edge Transport server.

Correct Answer: C

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 3

Your company has an Exchange Server 2007 environment. You have a resource named Conference Room. Employees are permitted to book the Conference Room resource. You need to customize the response message that users will receive when they book the Conference Room resource. What should you do?

A. Use Active Directory Users and Computers.

B. Run the Set-ResourceConfig cmdlet.

C. Run the Set-MailboxCalendarSettings cmdlet.

D. Use the Exchange Management Console.

Correct Answer: C

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 4

Your Exchange Server 2007 organization contains two Exchange servers. The roles on the two servers are configured as shown in the following table

Two users named Marc and Mari a have mailboxes on ExchMb1. Marcs computer is on s egment A.
Marias computer is on s egment B.
T he Exchange servers are on s egment C .
M arc sends a message to Mari a . The message leaves Marcs Outbox and is listed in his Sent Items folder. However, the message is never delivered to Mari as mailbox . You need to find out the most likely cause of the problem . What should you do?

A. On ExchMb1, run the Test-MAPIConnectivity -Server ExchMb1 cmdlet.

B. On ExchMb1, run the Test-ServiceHealth cmdlet.

C. On ExchHub1, run the Test-ServiceHealth cmdlet.

D. On a computer on segment A, run the Test-MAPIConnectivity -Server ExchMb1 cmdlet.

Correct Answer: C

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 5

You have an Exchange Server 2007 Service Pack 1 (SP1) environment. You need to schedule replication for a public folder. Which cmdlet should you run?

A. Set- PublicFolder

B. Set- JournalRule

C. Disable-ContinuousReplicationHostName

D. Set-MailPublicFolder

E. En able-ContinuousReplicationHostName

Correct Answer: A

Question 6

You are transitioning from an Exchange Server 2003 environment to an Exchange Server 2007 environment. You need to ensure that the Recipient Update Service functions properly after you update the AD DS schema for Exchange 2007. You need to achieve this goal with the least amount of impact to your environment. What should you do?
You have a single Active Directory Domain Services (AD DS) forest. The forest has Exchange Server 2003 installed in the domains as shown in the following table.

A. Run the setup /PrepareLegacyExchangePermissions:contoso.com command.

B. Run the setup /PrepareSchema command.

C. Run the setup /PrepareLegacyExchangePermissions command.

D. Run the setup /PrepareAD command.

Correct Answer: C

Question 7

A new mailbox is created at 9 A.M. Users of Microsoft Office Outlook Web Access are able to see and use the new mailbox in the global address list (GAL) at 10 A.M. Users of Outlook Anywhere are not able to see the new mailbox in the GAL until the next day. You need to configure the Exchange Server 2007 computer to allow users of Outlook Anywhere to see a new mailbox in the GAL within four hours after the mailbox is created. What should you do?

A. Set a custom update schedule for the offline address book (OAB).

B. Enable Public Folder distribution for the offline address book (OAB).

C. Enable Web-based distribution for the offline address book (OAB).

D. Enable support for Outlook 2003 with Service Pack 2 or later clients on the offline address book (OAB).

Correct Answer: A

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 8

You are trying to create a new resource mailbox from the Exchange
Management Shell byusing the New-Mailbox cmdlet. When you create the resource mailbox, you are asked to supply a password. Later when you go to configure the calendar options for the resource mailbox in Outlook Web Access, those options are not available. What is the most likely problem?

A. You did not specify that the mailbox was to be a resource mailbox by using the Resource switch with the New-Mailbox cmdlet.

B. You cannot perform the initial creation of a resource mailbox from the Exchange Management Shell; you will need to use the Exchange Management Console

C. You must use the New-ResourceMailbox cmdlet to create resource mailboxes, not the New-Mailbox cmdlet.

D. You did not specify that the mailbox was to be a resource mailbox by using the -Room or -Equipment switch with the New-Mailbox cmdlet

Correct Answer: D

Question 9

You are preparing to upgrade from an Exchange Server 2003 environment to an Exchange Server 2007 environment. You need to ensure that internal users and remote users are able to access their mailboxes during the transition from Exchange Server 2003 to Exchange Server 2007. What should you do?

A. Install the Exchange 2007 Mailbox server role.

B. Install the Exchange 2007 Hub Transport server role.

C. Install the Exchange 2007 Client Access server role.

D. Install an Exchange 2003 front-end server.

Correct Answer: C

Question 10

You are employed as the exchange administrator at Abc.com. The Abc.com network contains an Exchange Server 2007 server named Server01. You are responsible for managing the Exchange network for Abc.com. You have been informed that the server running Exchange Server 2007 has failed. You need to get the server operational and thus proceeded as follows: You rebuild the server; you recover the information in the mailbox database as well as the log directories. After the rebuild and recovery the Abc.com users complained that Server01 is unacceptably slow and does not return the expected results either. You need to address the situation by rebuilding the full - text index catalog for all databases on the Mailbox server role. What should you do?

A. First stop the Microsoft Exchange Search Service. Then delete the full-text index catalog directory. Then start the Microsoft Exchange Search Service

B. First run the Dismount-Database cmdlet. Then delete the full-text index catalog directory. Then start the Microsoft Exchange Search Service

C. First stop the Microsoft Exchange Search Service. Then run the Set-MailboxDatabase -IndexEnabled:$true cmdlet. Then start the Microsoft Exchange Search Service.

D. First delete the full-text index catalog directory. Then run the Mount-Database cmdlet. Then start the Microsoft Exchange Search Service

Correct Answer: A

Question 11

In your Exchange Server 2007 environment, a users mailbox was purged from the mailbox server, and a backup of the mailbox database was restored to a recovery storage group. You need to recover the purged mailbox to a production database. What should you do?

A. Run the Enable-Mailbox cmdlet from the Exchange server.

B. Run the Restore-Mailbox cmdlet from the Exchange server.

C. Run the Connect-Mailbox cmdlet from the Exchange server.

D. Run the Exmerge utility from the Exchange server.

Correct Answer: B

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 12

You need to identify the Exchange Server 2007 server role that must be installed on a stand-alone server. Which server role should you identify?

A. Edge Transport

B. Client Access

C. Mailbox

D. Hub Transport

Correct Answer: A

Question 13

You are performing a new installation of Exchange Server 2007. You complete the installation of a Hub Transport server named ExchHub1 and an Edge Transport server named ExchEdge1.
You need to configure the e-mail routing to meet the following requirements .
Configure ExchHub1 to route Internet e-mail to ExchEdge1.
Configure ExchEdge1 to route e-mail between your Exchange organization and the Internet.
Which two sets of actions should you perform? (Each correct answer presents part of the solution. Choose two.)

A. On ExchEdge1, create a new Send connector named Edge-Internet.
Add the * domain as an address space and specify to use DNS to route e-mail
automatically.
Add ExchEdge1 as a source server.

B. On ExchHub1, create a new Send connector named Hub - Edge.
Add the * domain as an address space and specify to use DNS to route e -mail
automatically.
Add ExchHub1 as a source server.

C. On ExchEdge1, open the Exchange Management Shell.
Export a new Edge Subscription file.

D. On ExchHub1, open the Exchange Management Console.
Import the Edge Subscription file.

Correct Answer: C,D

Question 14

After the EdgeSync process has been completed and the ADAM instance on the Edge Transport server has completed replication, what types of items does the Edge Transport server now know about that it did not know beforehand? (Choose all that apply.)

A. All configured message classifications

B. All configured remote domains

C. All configured send connectors

D. All configured external domains

E. All configured internal accepted domains

F. All mailbox-enabled users in the domain

G. All configured receive connectors

Correct Answer: A,B,C,E,F

Question 15

An inappropriate message that has the subject line of Exchange is sent to all users on the Exchange Server 2007 Mailbox server named Exch1. You need to delete this message from all mailboxes. What should you do?

A. Create a new mailbox named TempMailbox that has a folder named Export. Run the Get-Mailbox ?Server Exch1 | Export-Mailbox ?TargetMailbox TempMailbox ?TargetFolder Export ?SubjectKeywords "Exchange" ?DeleteContent cmdlet.

B. On Exch1, find the message ID of the original message and then run the Export-Message ?Identity <IDnumber> c:\temp cmdlet. Delete all of the messages in the directory.

C. On Exch1, find the message ID of the original message and then run the Remove-Message ?Identity <IDnumber> cmdlet.

D. From the Exchange Management Console, create a new transport rule named Exchange delete. Set the condition to "when the Subject field contains Exchange". Set the action to "silently drop the message".

Correct Answer: A

Welcome to TestSimulate

Microsoft TS: Exchange Server 2007, Configuring (70-236) Free Practice Test