Supporting Industry Standard Server Solutions (HP2-T23) Free Practice Test

Question 1

Which technologies are supported on a ProLiant Gen8 server blade when the appropriate mezzanine card is installed along with the FlexFabric interconnects? (Select two)

A. FCoE

B. Accelerated Ethernet

C. iSCSI

D. Adaptive Fibre Channel

E. InfiniBand

Correct Answer: B,E

Question 2

You need to check the firmware revision of the disk drives installed in a ProLiant DL380Gen8 server. What can you use to check the revision while the server is online?

A. HP Insight Diagnostics

B. Option ROM Configuration for Arrays (ORCA)

C. Array Configuration Utility (ACU)

D. Integrated Management Log

Correct Answer: A

Question 3

A support engineer is troubleshooting a ProLiant DL360p Gen8 server.A hard disk m a four drive RAID 5 set has failed.The engineer notices that on three of the drives, the LEO labeled D on the exhibit is on.What does the condition indicate?

A. The LED indicates failure and predictive failure alerts. Two additional drives in the RAID set are at risk of failing and need to be replaced

B. The drive failure has corrupted three drives in the RAID set. The array must be rebuilt and data restored from backup

C. Hot swapping of the failed drive is not supported in this condition

D. The drives should not be removed when this LED is illuminated

Correct Answer: D

Question 4

Which feature should you enable in RBSU in a ProLiant Gen8 server lo reduce processor power usage and improve overall performance in some applications?

A. Intel Hyper-Threading

B. Processor Core Disable

C. HP Dynamic Power Savings Mode

D. OS Control Mode

Correct Answer: B

Question 5

Why is it considered a best practice to use tools such as HP Smart Update Manager (SUM) and Virtual Connect Support Utility (VCSU) to deploy firmware components?

A. These are the only tools that work with Virtual Connect Enterprise Utility (VCEU).

B. These tools support cross-platform deployments

C. These tools are compatible with all versions of firmware

D. These tools check dependencies and limitations.

Correct Answer: D

Question 6

After a system administrator replaces a system board on an HP server blade, the BIOS update fails. After it reboots, the server works with the old BIOS version.
What is the next step to troubleshoot this issue?

A. Use a new Firmware Update CD.

B. Use RBSU to clear the NVRAM.

C. Attempt to reflash the BIOS again.

D. Order a new system board

Correct Answer: C

Question 7

You ate installing a new HP BladeSystem c7000 enclosure. The customer wants to configure the iLO and interconnect IP addresses so that they are automatically maintained during a hardware swap How should you configure the enclosure?

A. Configure the IP on each device and enable one enclosure IP mode.

B. Use Insight Control Server Deployment to configure the enclosure.

C. Use the Insight Display fixed IP feature.

D. Use Enclosure-Bay IP Addressing.

Correct Answer: D

Welcome to TestSimulate

HP Supporting Industry Standard Server Solutions (HP2-T23) Free Practice Test