EMC Specialist - Implementation Engineer, PowerStore Solutions (DES-1221) Free Practice Test
Question 1
At what point in the configuration of an External Storage Import session does the data path from the host to the PowerStore system become the active IO path?
Correct Answer: B
Question 2
How many cables are required for minimum support for PowerStore T Front-End storage connectivity?
Correct Answer: A
Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).
Question 3
A storage administrator has provisioned a 50GB volume and presented it to an application. The application owner has requested that the volume be replicated to a secondary array. Which policy should be assigned to the volume to enable replication?
Correct Answer: A
Question 4
An administrator received the following alert from PowerStore regarding a previously created NAS server?
Description:
The SMB server of the NAS server PowerStore_NAS_01 is configured to be joined to the domain test.mid, but is currently not joined.
Which setting should the administrator change?
Description:
The SMB server of the NAS server PowerStore_NAS_01 is configured to be joined to the domain test.mid, but is currently not joined.
Which setting should the administrator change?
Correct Answer: B
Question 5
You are a network administrator that needs to setup a Data switch model S5248F-ON to be used for PowerStore 7000T system Use the Simulator to:
1) Check the OS version and license status.
2) Set management IP address 172.17.57.10 subnet as 255.255.255.0 on chassis = 1, slot = 1, port = 10
3) Enable the port
4) Configure default route with gateway 192.168.1.254, NTP server 192.168.1.50
5) Enable RSTP with priority 4096
6) Commit and exit.
1) Check the OS version and license status.
2) Set management IP address 172.17.57.10 subnet as 255.255.255.0 on chassis = 1, slot = 1, port = 10
3) Enable the port
4) Configure default route with gateway 192.168.1.254, NTP server 192.168.1.50
5) Enable RSTP with priority 4096
6) Commit and exit.
Correct Answer:
check the answer below in explanation.
Explanation
Below are the exhibits solution for this simulation.
Explanation
Below are the exhibits solution for this simulation.
Question 6
What does a Storage Administrator need to consider about Resource Balance when assigning volumes?
Correct Answer: B
Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).
Question 7
What describes the remote replication Failover operation?
Correct Answer: B
Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).