EMC Specialist - Implementation Engineer, PowerEdge (DES-4121) Free Practice Test
Question 1
A technician creates two virtual disks and assigns a dedicated hot spare to each virtual disk. They also create a global hot spare. A drive fails on the second virtual disk what is the result?
Correct Answer: A
Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).
Question 2
Which tool provides automated Dell support case creation?
Correct Answer: D
Question 3
A technician needs to use the iDRAC GUI to toil back a diagnostics firmware revision on a server that was updated four weeks previously. However, the replaced version cannot be found in the Firmware Rollback section on the iDRAC GUI.
What could be the issue?
What could be the issue?
Correct Answer: C
Question 4
A technician receives an email alert that one of the drives on a server has failed Upon replacing the bad drive they receive a second email alert that the same drive has failed.
The technician installs the replacement drive in another server and it works correctly?
What is a valid troubleshooting, step for this issue?
The technician installs the replacement drive in another server and it works correctly?
What is a valid troubleshooting, step for this issue?
Correct Answer: D
Question 5
A technician needs to repurpose a server. The server has dual processors with 18 cores each The OS only sees 24 threads in total.
Which setting should the technician change in Processor Settings in the System BIOS?
Which setting should the technician change in Processor Settings in the System BIOS?
Correct Answer: A
Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).
Question 6
A technician is troubleshooting a server with the following components
*Two CPUs
*Memory installed in sockets A1,A2, A3, A4, A5, A6, B1, B2,B3, 64, B5, and B6
*Expansion cards installed in all expansion slots
*6x 1 TB drives configured as a RAID 6 virtual dish
The server has the following symptoms:
*CPU2 has failed
*Memory *> slots B1.B2. B3. B4. B5, and B6 is not accessible
*Some of the expansion cards have gone offline
What should the technician do to resolve this issue'
*Two CPUs
*Memory installed in sockets A1,A2, A3, A4, A5, A6, B1, B2,B3, 64, B5, and B6
*Expansion cards installed in all expansion slots
*6x 1 TB drives configured as a RAID 6 virtual dish
The server has the following symptoms:
*CPU2 has failed
*Memory *> slots B1.B2. B3. B4. B5, and B6 is not accessible
*Some of the expansion cards have gone offline
What should the technician do to resolve this issue'
Correct Answer: B