SNIA Storage Networking Management & Administration (S10-201) Free Practice Test

Question 1

A two fabric merge has failed, leaving you with segmented fabrics. Investigation of the switch domain IDs shows that there is an ID conflict between two of the switches. What is the corrective action?

A. no action is necessary, the ID conflict will be resolved by negotiation

B. utilize the name server editor to change the domain ID within the fabric

C. change the domain ID on the switch that needs to be changed and allow negotiation to resolve the issue

D. take one of the switches offline (disabled), change the domain ID, and bring the switch back online (enabled)

Correct Answer: D

Question 2

You are trying to upgrade an existing 1Gb/s FC SAN that is using 62.5 micron multi-mode cable from a tape library to a server that is 175 meters away to 2Gb/s Fibre Channel. After switching to the 2Gb/s Fibre Channel equipment, a connection to the server cannot be maintained. When a connection is made, numerous errors are reported. What is the cause of the errors?

A. 2Gb/s Fibre Channel must convert to LC from SC connectors

B. 2Gb/s Fibre Channel must use 50 micron multi-mode cable

C. 2Gb/s Fibre Channel cable length requires an optical splitter

D. 2Gb/s Fibre Channel cable length has been exceeded

Correct Answer: D

Question 3

Which set of SCSI components are required to support SCSI command tag queuing?

A. adapter, device driver, controller, controller firmware

B. device, device driver

C. adapter, adapter driver, device, device driver

D. adapter, device, device driver

Correct Answer: C

Question 4

What are two (2) valid steps when adding a new host to an existing fabric? (Choose two.)

A. remove zone members

B. deactivate the zone set

C. create new zone

D. merge new zone

E. add new zone member

Correct Answer: C,E

Question 5

What is a recommended guideline for merging two Fibre Channel fabrics?

A. Disable zoning on all switches prior to merging fabrics.

B. Connect the fabrics using one ISL at a time.

C. Log out from the principal switch prior to merging fabrics.

D. Change domain ID to consecutive values.

Correct Answer: B

Question 6

Which three (3) backup methods support application recovery of a database? (Choose three.)

A. Copy the database folder to another location and back up the files in the normal fashion.

B. Cold backup method where the database services have been stopped before the backup.

C. File system backup method including transaction log needed to run the backup and restore.

D. Use software snapshot technology that takes a point in time snapshot.

E. Copy-on-Write technology built into the database that can be used by backup software.

Correct Answer: B,D,E

Question 7

When preparing to merge two fabrics, which two items should be checked before connecting the fabrics? (Choose Two.)

A. interoperability modes are configured per vendor instructions

B. fabrics are co-located to prevent segmentation

C. new configurations are enabled to allow the merge

D. zones sets are activated

E. timeout values are set properly

Correct Answer: A,E

Question 8

You have noticed some unusual behavior in your storage environment. You need to troubleshoot the problem and review the available options there are to resolve the issues and to restore stability. What will restore stability to the environment?

A. Install system upgrades promptly after successful testing.

B. Limit collaboration with other organizations with similar storage networks and configurations.

C. An annual security audit should be performed and system logs should be scrutinized for unusual activity.

D. Align applications to information policy management requirements.

Correct Answer: A

Question 9

There are two datacenters separated by twelve (12) km with IP connections linking the two sites. Site A is the primary production site, Site B is for test/development & disaster recovery. Site A synchronously replicates data to Site B for disaster recovery purposes via a merged SAN fabric between the two sites. The communication between the two sites is lost. What storage event will occur as a result of this?

A. SAN Fabric will do a build fabric following segmentation

B. SAN Fabric will do a reconfigure fabric following segmentation

C. SAN and non-SAN disk I/O will be halted

D. SAN Fabric applications will stop executing I/O

Correct Answer: A

Question 10

A company has implemented a stretch cluster between two sites that are 100km apart in conjunction with synchronous data replication. What are two (2) operational benefits of this implementation? (Choose two.)

A. easier to manage SAN configuration

B. protection against fabric service failure

C. decreased possibility of data inaccessibility

D. increased application availability

E. protection against ISL failure

Correct Answer: C,D

Welcome to TestSimulate

SNIA Storage Networking Management & Administration (S10-201) Free Practice Test