Snia Storage Architect-Assessment,Planning and Design (S10-300) Free Practice Test

Question 1

A host is using only 10 percent of a 64 GB volume. Which solution would enable you to reclaim The wasted disk space?

A. Create a new 16 GB volume create a COW snapshot of the production volume restore the snapshot to the new volume.

B. Create a new 16 GB volume attach the new volume to the production volume as a split mirror snapshot to migrate thedatA.

C. Create a new 16 GB volume use a file system copy to migrate thedatA.

D. Shrink the 64 GB volume to 16 GB

Correct Answer: C

Question 2

For a high availability storage network what should you do?

A. Establish two separate fabrics with unique name servers and management configurations.

B. Use fully redundant components with no single point of failure that are all interconnected using redundant paths and networks.

C. Interconnect all switches together with redundant ISLs and management interfaces.

D. Deploy two separate fabrics with redundant ISLs interconnecting them.

Correct Answer: A

Question 3

When designing a redundant IP storage network for data movement or access of remote data, which two must be considered? (Choose two)

A. Understand network solution including networkcircuits routers and gateways capabilities and Management interfaces.

B. Obtain data circuits with low latency and good quality that take diverse routes between locations.

C. Obtain the fastest network circuit that is available.

D. Enable IP jumbo frames and as large of TCP window size as possible.

Correct Answer: A,B

Question 4

Company.com is configuring a host to have access to three virtual devices. The customer wants to strip these devices into one logical volume. Which three choices are valid?

A. File based virtualization

B. Host based virtualization

C. Network based virtualization

D. Device based virtualization

E. Capacity based virtualization

Correct Answer: B,C,D

Question 5

Which statement is correct?

A. Fan-out is the ratio of switch ports to storage ports; an indication of switch load at a single storage port.

B. Fan-out is the ratio of switch ports to host ports; and indication of switch load at a single host port.

C. Fan-out is the ratio of host ports to storage ports; an indication of host traffic load at a single storage port.

D. Fan-out is the ratio of storage ports to host ports; an indication of storage load at a single host port.

Correct Answer: C

Question 6

Which three technical requirements should be rejected or restarted? (Choose three)

A. The SAN must allow all functionality of business critical server at site X to resume within Y minutes at Site Z.

B. The ROI of the SAN infrastructure should equal or be lower than the existing infrastructure.

C. Nee to keep the business running in case of a disaster.

D. In an effort to stay current with technology advances all business critical servers are to be hosted on SANs.

Correct Answer: B,C,D

Question 7

What is the Maximum Transmit Unit (MTU) size for IP-based NAS and SAN using Gigabit Ethernet jumbo frames?

A. 100M bytes

B. 65K bytes

C. 1508 bytes

D. 2K bytes

Correct Answer: B

Question 8

A company needs to protect against data corruption using split mirror snapshots. Their RTO is 15 minutes and RPO is one hour. It takes 15 minutes to create an incremental split mirror snapshot. Which scenario fulfills their needs most efficiently?

A. Use two snapshot volumes and incrementally establish one volume every hour.

B. Use one snapshot volume and incrementally establish it every 60 minutes.

C. Use one snapshot volume and incrementally establish it every 30 minutes.

D. Use two snapshot volumes and incrementally establish one volume every 30 minutes.

Correct Answer: D

Question 9

You are conducting an ILM assessment and just completd the consolidation and assignment phase. What is your next steps?

A. Prepare actionable recommendations

B. Develop detailed design

C. Collect data and requirements

D. Perform gap analysis

Correct Answer: D

Welcome to TestSimulate

SNIA Snia Storage Architect-Assessment,Planning and Design (S10-300) Free Practice Test