Network Infrastructure AIS 2011 (HP2-Z18) Free Practice Test

Question 1

Port B1 on an HP ProCurve 5406zl switch is an untagged member of VLAN 155 and not a tagged member of any VLAN. Port C1 is a tagged member of VLAN 155 and an untagged member of VLAN 100. You issue the following command: 5406zl(config)# no vlan 155
Why do you receive the following prompt?
The following ports will be moved to the default VLAN:
Bl
Do you want to continue? [y/n] :

A. The CLI will not delete a VLAN with any port membership.

B. All ports must be moved to the default VLAN before you can delete the VLAN.

C. The CLI always issues this prompt when deleting a VLAN.

D. The CLIwill not allow you to orphan a port.

Correct Answer: B

Question 2

You are the network administrator at a company with multiple remote sites. You are using HP ProCurve Manager Plus (PCM+) to manage network devices in all of the company's offices. How can PCM+ remote agents help manage your network?

A. They detect unauthorized PCM+ servers and clients.

B. They detect unauthorized PCM+ servers and quarantine unauthorized switches and hubs.

C. They enforce policies defined on the PCM+ server and discover manageable devices.

D. They manage access by remote clients and coordinate communications across subnets.

Correct Answer: C

Question 3

Alter using. the Manual Discovery Wizard to add a switch to the HP ProCurve Manager Plus (PCM-) database.PCM+ still not display a configutaiion or the switch. What can you do to obtain configuration information in PCM+?

A. Use the scan tool to update the configuration database for the switch

B. Move tne switch's subnet io the Managed Subnets list

C. Upgrade the switch's softwaie to enable full PCM+ support

D. Move the switch's VLANs to the Managed VLANs list

Correct Answer: B

Question 4

After issuing the following two CLI commands, how can you gain access to the CLI of the switch if the manager and operator passwords have been lost?
E5406 (config)# no front-panel-security password-clear
E5406(config)# no front-panel-security factory-reset

A. Power cycle the switch and access the ROM console to clear passwords at the manager prompt.

B. Reset the passwords using the Secure Access Wizard i n ProCurve Manager Plus.

C. Press the Reset and Clear buttons on the switch's front panel, release the Reset button and hold the Clear button until the all switch LEDs blink rapidly.

D. Contact support and obtain a one-time password to gain access to the switch.

Correct Answer: D

Question 5

What is the effect of the following command entered at the CLI of an HP E3500 yI switch?
E3500 (config) # timesync sntp

A. The switch will provide SNTP services to all connected VLANs.

B. The switch will use SNTP as its time synchronization protocol

C. The switch will broadcast for an SNTP server.

D. The switch's clock will be synchronized with a configured SNTP server d.

Correct Answer: B

Question 6

DRAG DROP
Place each A-Series port type next to its description

Correct Answer:

Explanation:

Trunk - can support one untagged VLAN and multiple tagged VLANs Access- can only support one untagged VLAN Hybrid - can support multiple untagged and tagged vlans

Question 7

Refer to the exhibit below.
Which VLAN will be carried untagged on GigabitEthernet 2/0/2?

A. VLAN 1

B. VLAN 100

C. VLAN 101

D. VLAN 102

Correct Answer: D

Question 8

You are at the manager level prompt In the CLI of an HP E3500 yI switch. Which options are available at this prompt? (Select two)

A. update software

B. restart the switch

C. enable IP routing

D. disable ports

E. assign IP address to VLAN interface

Correct Answer: A,B

Question 9

What is the effect of the following command entered at the CLI of an HP A12500 switch?
[A12500] rip

A. The CLI moves to the RIP view.

B. The administrator is prompted to enter "enable" or "disable."

C. rip is enabled.

D. The CLI displays the RIP configuration

Correct Answer: C

Question 10

What is the effect of the following commands entered at the CLI of an HP E8212 zI switch with routing and RIP enabled?
E8212 (rip)# redistribute ospf

A. The switch will include routes learned through RIP in all OSPF link-state messages.

B. The switch will give preference to OSPF routes over RIP routes in its route table.

C. The switch will include routes learned through OSPF in all RIP updates.

D. The switch will filter OSPF routes from RIP updates received from peers,

Correct Answer: C

Welcome to TestSimulate

HP Network Infrastructure AIS 2011 (HP2-Z18) Free Practice Test