LTM Specialist Exam (301) Free Practice Test

Question 1

Which is the result when multiple monitors are assigned to a pool member?

A. The member is marked available if sufficient monitors succeed, and as unavailable if insufficient monitors succeed.

B. The member is marked as available if any of the monitors succeed.

C. The member is marked as unavailable if any of the monitors fails.

D. The member is marked available if all monitors succeed, and as marginal if one or more monitors fail(s).

Correct Answer: A

Question 2

A monitor has been defined with an alias port of 443. All other options are left at their defaults. The administrator
wishes to assign it to a pool of members where the members' ports vary. Which is the result?

A. For each member. If it is running an SSL service at the member port, the monitor may work. Otherwise, the monitor will fail and the member for each member, if it is running an SSL service at the member port, the monitor may work. Otherwise, the monitor will fail and the member will be marked down.

B. This assignment is not allowed since the port do not match.

C. For each member, if the member port is not 443, the member will be marked down. For each member,if the member? Port is not 443, the member will be marked down.

D. For each member, the monitor will test member node at port 443. For each member, the monitor will test the member ? node at port 443.

Correct Answer: D

Question 3

An LTM has the 3 virtual servers, four self IP addresses defined and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults. VirtualServerl Destination: 10.10.2.102:443 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network VirtualServer2 Destination: 10.10.2.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network VirtualServer3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNAT1 Source IP: All Addresses SNAT Address: SNAT Pool with 2 members - 172.16.20.50 and 192.168.10.50 Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1;
10.10.1.1 A connection attempt is made with a source IP and port of 10.20.100.50:2222 and a destination IP and port of 10.10.2.102:80. When the request is processed, what will be the destination IP address?

A. Destination IP: 10.10.2.102

B. Destination IP: pool member in the 192.168/16 network

C. The request will be dropped.

D. Destination IP: pool member in the 172.16/16 network

Correct Answer: B

Question 4

Which statement is true concerning packet filters?

A. In addition to administrator-created filters, three always exists a "deny all" filter that processes traffic last.

B. The order of filters does not affect which traffic is accepted or denied

C. Filters cannot prevent access to the management port.

D. Filters cannot prevent the BIG_IP synching process from taking place.

Correct Answer: C

Question 5

An LTM has the 3 virtual servers, 2 SNATs, four self IP addresses defined, and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults.
Assume port exhaustion has not been reached. Vi rtualServerl Destination: 10.10.2.102:80 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network SNAT Automap configured Vi rtualServer2 Destination: 10.10.2.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network Vi rtualServer3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNAT1 Source IP: 10.10.0.0 netmask 255.255.0.0 SNAT Address: SNAT Pool with 2 members
172.16.20.50 and 192.168.10.50 SNAT2 Source IP: All Addresses SNATAddress:
10.10.2.102 Floating Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1

A. Source IP: 10.10.2.1; Destination IP: 10.10.2.10

B. The request will be droped.

C. Source IP: 10.10.2.1; Destination IP: pool in the 172.16/16 network C

D. Source IP: Either 172.16.20.50 or 192.168.10.50; Destination IP: 10.10.2.10

E. connection attempt is made with a source IP and port of 10.10.100.50:2222 and a destination IP and port of 10.10.2.10:80. When the request is processed, what will be the source and destination IP addresses?

F. Source IP: 10.10.2.102; Destination IP 10.10.2.10

Correct Answer: D

Welcome to TestSimulate

F5 LTM Specialist (301) Free Practice Test