Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0) (200-105) Free Practice Test

Question 1

Which WAN topology is most appropriate for a centrally located server farm with several satellite branches?

A. star

B. hub and spoke

C. full mesh

D. point-to-point

Correct Answer: B

Question 2

Users have been complaining that their Frame Relay connection to the corporate site is very slow. The network administrator suspects that the link is overloaded.
Based on the partial output of the Router # show frame relay pvc command shown in the graphic, which output value indicates to the local router that traffic sent to the corporate site is experiencing congestion?

A. in DF packets 0

B. in FECN packets 147

C. last time PVC status changed 00:25:40

D. in BECN packets 192

E. DLCI=100

Correct Answer: D

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 3

Which statement describes how the EIGRP feasible distance is calculated?

A. It is the sum of all K values in EIGRP process

B. It is the best metric along a path that includes the metric to the neighbor advertising the path

C. It is the total metric advertised by the upstream neighbor

D. It is a path with a reported distance less than the current best path

Correct Answer: B

Question 4

The internetwork infrastructure of company XYZ consists of a single OSPF area as shown in the graphic. There is concern that a lack of router resources is impeding internetwork performance.
As part of examining the router resources, the OSPF DRs need to be known. All the router OSPF priorities are at the default and the router IDs are shown with each router. Which routers are likely to have been elected as DR? (Choose two.)

A. Corp-1

B. Corp-3

C. Branch-1

D. Branch-2

E. Corp-4

F. Corp-2

Correct Answer: D,E

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 5

Refer to the exhibit. What address is a feasible successor?

A. 172.16.3.0

B. 172.16.4.0

C. 10.1.4.4

D. 10.1.2.2

Correct Answer: D

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 6

Which two statements about MPLS are true ?

A. it uses labels to separate and forward customer traffic

B. it tags customer traffic using 802.1q

C. it provides automatic authentication

D. it encapsulates all traffic in an ipv4 header

E. it can carry multiple protocols, including ipv4 and ipv6

Correct Answer: A,E

Question 7

Which two authentication methods are compatible with MLPPP on a serial interface? (Choose two.)

A. PAP

B. CHAP

C. TACACS+

D. PEAP

E. LEAP

Correct Answer: A,B

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 8

Refer to the exhibit. What statement is true of the configuration for this network?

A. The configuration that is shown provides inadequate outside address space for translation of the number of inside addresses that are supported.

B. Because of the addressing on interface FastEthernet0/1, the Serial0/0 interface address will not support the NAT configuration as shown.

C. The number 1 referred to in the ip nat inside source command references access-list number 1.

D. ExternalRouter must be configured with static routes to networks 172.16.1.0/24 and 172.16.2.0/24.

Correct Answer: C

Question 9

Which three features are supported when you use TACACS+ for device management? (Choose three.)

A. It supports user notifications.

B. It can provide additional challenges beyond the username and password.

C. It can connect disparate networks.

D. It can create network access clients.

E. It can restrict the commands that individual users are allowed to execute.

F. It supports UNIX server functionality.

Correct Answer: A,B,E

Question 10

In which integration method is an IPv6 packet encapsulated within an IPv4 protocol?

A. proxy

B. dot1q

C. tunneling

D. dual-stack

Correct Answer: C

Question 11

Drag and Drop Question
Drag and drop the BGP terms from the left onto the correct descriptions on the right.

Correct Answer:

Question 12

Refer to the exhibit, R1 and R2 are failing to establish an eBGP peering over the 192.168.12.0/24 network. Which action will correct the problem?

A. adding the f24 network mask to the network 192.168.12.0 statement on both routers

B. changing the remote-as 100 keyword on R2 to remote-as 200

C. changing the router bgp 100 command on R1 to router bgp 200

D. changing the router bgp 100 command on R2 to router bgp 200

Correct Answer: D

Question 13

Which statement about access lists that are applied to an interface is true?

A. You can apply only one access list on any interface.

B. You can place as many access lists as you want on any interface.

C. You can apply multiple access lists with the same protocol or in different directions.

D. You can configure one access list, per direction, per Layer 3 protocol.

Correct Answer: D

Welcome to TestSimulate

Cisco Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0) (200-105) Free Practice Test