Integrating HP ProLiant Server Solutions (HP0-S44) Free Practice Test

Question 1

An integrator is troubleshooting a problem with an HP Virtual Connect FlexFabric 10Gb/24Port module in an HP c7000 BladeSystem Enclosure that is managed by HP OneView.
How should the integrator collect logs from the HP Virtual Connect FlexFabric module to provide to HP Technical Support?

A. Run the report command from Virtual Connect Support Utility (VCSU)

B. Create logical interconnect support dump from HP OneView.

C. Create Virtual Connect support dump from Virtual Connect Manager (VCM)

D. Create appliance support dump from HP OneView.

Correct Answer: B

Question 2

A customer is implementing a new rack solution in their datacenter. The racks will be supporting a variety of HP ProLiant Gen9 servers in each rack, and the racks will be sharing a common hot aisle due to space limitations. The customer is concerned about the amount of heat that will be generated.
What should the integrator recommend to the customer for the installation of the racks?

A. Verify that the ProLiant Gen9 servers have redundant fans installed in them.

B. Verify that the rear rack doors are solid in order to deflect the heat up through the top of the rack.

C. Verify that the backs of the racks are a minimum of 48 inches (121.9 cm) apart to allow for heat release.

D. Verity that there are enough cooling vent tiles in the shared hot aisle.

Correct Answer: D

Question 3

A system Integrator is installing two HP ProLiant BL460c Gen9 servers in an HP c7000 BladeSystem Enclosure that is managed by HP OneView The enclosure has two HP Virtual Connect Flex-10 Ethernet modules mat are used to provide network connectivity for the blades. After the integrator completes the installation, one of the new servers is able to connect to the network, but the other cannot.
Following the HP 6-step Troubleshooting Methodology, the integrator checks the downlink port statuses of the problem blade in HP OneView and finds that the ports show a status of "Unlinked - Pause Flood Detected"
Which two steps should the integrator take to add to the Optimized Action Plan to resolve this problem? (Select two.)

A. Create and assign a new server profile in HP OneView for the server generating the pause flood.

B. Resolve the issue with the NIC on the server generating the pause flood. This might include updating the NIC firmware and device drivers.

C. Reset pause flood protection from the Actions menu on the Enclosures screen in HP OneView.

D. Reset pause flood protection from Advanced Ethernet Settings in Virtual Connect Manager.

E. Reset pause flood protection from the Actions menu on the Interconnects screen in HP OneView.

Correct Answer: B,D

Question 4

Which technology provides power to the Flash Backed Write Cache (FBWC) on HP ProLiant Gen9 Servers?

A. HP Smart Storage Battery plugged directly into the Smart Array controller

B. super capacitors directly on the Smart Array controller

C. super capacitors directly on the system board

D. HP Smart Storage Battery plugged into the system board

Correct Answer: D

Question 5

An integrator needs to incorporate HP Insight Remote Support and HP Systems Insight Manager The integrator first installs HP Insight Remote Support on a hosting device and then installs HP SIM on the same device. However, the two solutions do not start sharing device information.
What does the integrator need to do to enable this sharing?

A. Power down the hosting device and reboot it after five minutes.

B. Integrate both solutions with HP OneView.

C. Obtain an HP SIM integration license and install it on the Insight Remote Support console.

D. Manually install the HP SIM adapter through the Insight Remote Support console.

Correct Answer: D

Question 6

Which component of HP Location Discovery Services is responsible for identifying the server location?

A. The UEFI Server Asset Identification setting

B. The iPDU panel

C. The server iLO device

D. HP OneView

Correct Answer: B

Welcome to TestSimulate

HP Integrating HP ProLiant Server Solutions (HP0-S44) Free Practice Test