Implementing HP MSM Wireless Networks (HP2-Z32) Free Practice Test

Question 1

What distinguishes an HP MSM460 AP from an HP MSM430 AP?

A. All radios on an MSM460 support 802.11n, while only one radio on an MSM430 supports this standard.

B. The MSM460 radios support 802.1n, while the MSM430 radios only support 802.11b/g/a.

C. The MSM460 radios support three spatial streams, while the MSM430 radios support two spatial streams.

D. The MSM460 supports 802.11n with MIMO on all radios, while the MSM430 supports 802.11n without MIMO.

Correct Answer: C

Question 2

A company has an MSM765 zl Controller that is managing more than one hundred APs. To increase redundancy, the company is adding another MSM765 zl Controller, which will form a team with the first. The controller currently supports an access-controlled VSC for guests. It assigns IP addresses to guest clients, directs the clients to its local web pages, and authenticates the guests to a local user account. Which aspect of this solution should the network administrator change in order implement teaming?

A. Controllers should use DHCP relay instead of assigning IP addresses to clients.

B. Controllers should now authenticate guests to an external RADIUS server.

C. Controllers should now direct guests to pages on an external web server.

D. Controllers should use non-access-controlled VSCs with the guest login pages.

Correct Answer: D

Question 3

A multiple-input, multiple-output (MIMO) device has a 2 x 3 configuration.
Which statement about this configuration is true?

A. The device has two transmitting antennas and three receiving antennas.

B. The device has two antennas that each support three spatial streams.

C. The device can transmit two and three spatial streams.

D. The device can transmit to six clients at once, using slightly different frequencies.

Correct Answer: B

Question 4

What is the purpose of the uncontrolled port in the 802.1X authentication process?

A. The authenticator and the supplicant use this port to exchange EAP packets

B. The authenticator uses this port to communicate with the authentication server

C. The supplicant uses this port to send and receive data after the authentication process is successful

D. The authentication server blocks this port if authentication is unsuccessful

Correct Answer: A

Question 5

HP MSM APs support a VSC that specifies 54 Mbps as the highest supported data rate. Several clients connect to the WLAN associated with this VSC.
What is the throughput and bandwidth that the clients experience?

A. When multiple clients connect to an AP radio, each client typically receives about 50 Mbps throughput.

B. When multiple clients connect to an AP radio, each of those clients is limited to 54 Mbps.

C. All clients connected to an AP radio share a throughput of less than 54 Mbps, but a client can transmit or receive at 54 Mbps.

D. All clients connected to the VSC share a total of 54 Mbps of throughput regardless of how many AP radios support the VS

Correct Answer: B

Question 6

A company has an MSM solution that includes an MSM 760 Controller and MSM APs. The VSC for the employees does not use the controller for access control, nor does it use wireless mobility. Employees' wireless clients should be assigned to VLAN 10. How should the Ethernet network administrators design VLAN 10?

A. Extend VLAN 10 from the MSM Controller's LAN port to the APs' switch ports.

B. Extend VLAN 10 from its default router to the MSM Controller's Internet port.

C. Extend VLAN 10 from its default router to the MSM Controller's LAN port.

D. Extend VLAN 10 from its default router to the APs' switch ports

Correct Answer: A

Welcome to TestSimulate

HP Implementing HP MSM Wireless Networks (HP2-Z32) Free Practice Test